Casambi Self Powered Single Rocker Wireless Switch is a wireless switch that allows you to control your Casambi-enabled lighting system without the need for batteries or wiring. It can be used to turn lights on and off, dim lights, and control scenes. The switch is easy to install and use, making it a great choice for both new and existing homes. With its sleek design and variety of finishes, the Casambi Self Powered Single Rocker Wireless Switch is a stylish addition to any home.
Quick Start Guide
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© EnvironmentalLights.com
Pairing Your Casambi Switch
Environmental Lights offers two versions of Casambi-enabled switches : self-powered and non-self-powered. Though the
processes to pair them are similar, this guide will clarify the subtle differences, letting you enjoy your Casambi-enabled home all
the sooner!
Picture of Non-self-powered switch
Picture of self-powered switches
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
Self-Powered Switch
1. Log into the network you’d like to control. For details on setting up a Casambi network, please refer to the McWong
guide.
2. Press the “More” option on the bottom-right of the screen.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
3. Enter the “Switches” menu.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
4. Select “Add an EnOcean switch”.
a. Your phone may ask you to enable NFC. If so, the app should redirect you to the NFC setting. Turn it on and
return to the Casambi app.
5. Hold the back of the switch to the back of your phone until the switch is paired. This is usually indicated by a small
vibration from your phone.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
6. The switch is now available and can be found under “Switches” menu in the “More” tab.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
Configuring the Self-Powered Switch
1. Go to the “Switches” menu in the “More” tab. Select the self-powered switch you’d like to configure.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
2. Either select the “Faceplate” option or press on the 2D drawing of the switch between the “Information” and “Presets”
sub-menus.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
3. Select the faceplate option that represents the switch you are configuring.
a. The icons for the faceplate may be misrepresented as the Casambi Battery Remote (Xpress). If so, use the
images below to determine the correct settings for your switch.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
4. In the switch menu, under the “Presets” sub-menu, select the button/rocker you’d like to configure.
5. Configure the switch as described in the McWong guide.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
McWong/Non-self-powered Switch
1. Log into the network you’d like to control. For details on setting up a Casambi network, please refer to the McWong
guide.
2. Press the “More” option on the bottom-right of the screen.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
3. Enter the “Nearby Devices” menu.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
4. Choose the switch you’d like to pair from the list of Casambi devices.
a. The app does not currently have a way to identify individual switches aside from their part number. If possible, it
is best to pair and rename the switches one-by-one before installing them.
5. Add the switch to the network.
Quick Start Guide
Casambi Switch
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
6. The switch is now available and can be found under “Switches” menu in the “More” tab.
7. Please refer to the McWong guide for switch configuration details.
1
2
3
4
5
6
7
8
9
10
11
12
13
DIODE LED CASAMBI Controllers User guide
Mean Well PWM-120-12BLE User manual
RVP Casambi App User guide
iGuzzini X664 Installation guide
DIODE LED CASAMBI Controllers User guide
DIODE LED CASAMBI Controllers User guide
Vadsbo LD220WCM Installation guide
Vadsbo CGW-001-PSU User manual
DIODE LED CASAMBI Controllers User guide
DIODE LED CASAMBI Controllers User guide
