UNDISCLOSED RED1RC Operating instructions

SHOCKS WITH SPRINGS

1. SLIDE TOP PLATE (DIRECTION SHOWN)

2. SLIDER INSERT TO BE STOWED (AS SHOWN)

RED1RC

1/5 SCALE SHOCK STAND

SHOCKS WITHOUT SPRINGS

1. SLIDE TOP PLATE (DIRECTION SHOWN)

2. REMOVE SLIDER INSERT (SLIDE UP AND PULL)

3a. INSERT SLIDER INTO THE FRONT OPENING

3b. ARROW GOING IN FIRST

4. SLIDE TOP PLATE (DIRECTION SHOWN)

TO LOCK/HOLD THE SHOCKS FOR STORING

3. INSERT SHOCKS

INSERT SHOCKS