SMANIA Wildranger Operating instructions

Brand
SMANIA
Model
Wildranger
Category
Watches
Type
Operating instructions

SMANIA Wildranger is a versatile watch with a range of features to help you stay organized and on time. With its 5 ATM waterproof rating, you can wear it even in wet conditions. The watch has several different functions and modes of operation: Time, date, alarm, time 2, and stopwatch. You can also use the light function to see the time in low-light conditions.

To set the time, press and hold the C button for 2 seconds when on the Time menu. The seconds will start flashing. Press the B button to set them to 00. Press the C button to switch between seconds, hours and minutes. Use the B button to set the correct time. Holding the B button will let you change the time faster. Change the mode from 12 to 24 H at the end of the menu. When you are done setting the time, press the C button to continue.

SMANIA Wildranger is a versatile watch with a range of features to help you stay organized and on time. With its 5 ATM waterproof rating, you can wear it even in wet conditions. The watch has several different functions and modes of operation: Time, date, alarm, time 2, and stopwatch. You can also use the light function to see the time in low-light conditions.

To set the time, press and hold the C button for 2 seconds when on the Time menu. The seconds will start flashing. Press the B button to set them to 00. Press the C button to switch between seconds, hours and minutes. Use the B button to set the correct time. Holding the B button will let you change the time faster. Change the mode from 12 to 24 H at the end of the menu. When you are done setting the time, press the C button to continue.

INSTRUCTIONS
WILDRANGER MEN’S WATCH
PACKAGE CONTENTS
• Watch
• Instruction manual
TECHNICAL SPECIFICATIONS
• Strap length: 26 cm
• Watch width: 56 mm
• Material: PU, ABS
• Battery: CR2025
• Waterproof rating: 5 ATM
COMPONENTS
1. Button D (start)
2. Button C (reset)
3. Button B (mode)
4. Button A (light)
HOW TO USE
O FUNCTIONS AND MODES
• The watch has several different functions
and modes of operation: Time (1), date (2),
alarm (3), time 2 (4), stopwatch (5).
• Press the button B (3) to cycle through
these modes.
O TIME
• Press and hold the button C for 2 seconds
when on the Time menu to set the time.
• The seconds will start flashing. Press the
button B to set them to 00.
• Press the button C to switch between
seconds, hours and minutes. Use the
button B to set the correct time. Holding
the button B will let you change the time
faster.
• Change the mode from 12 to 24 H at the
end of the menu.
• When you are done setting the time, press
the button C to continue.
O DATE
• Press and hold the button C for 2 seconds
when on the Date menu to set the date.
• Set the flashing item using the button B.
• Use the button C to continue and save the
date at the end of the process.
O ALARM
• Press and hold the button C for 2 seconds
when on the alarm menu to set the alarm.
• Use the button B to set the flashing item.
• Alarm modes: SIG – short signal, ALM –
alarm.
• The alarm will beep for 20 seconds when it
reaches the selected time.
O TIME 2
• Setting this time 2 is the same as setting
time normally. The purpose of this tab is to
have two different time zones saved in the
watch.
O STOPWATCH
• Press the button C to start or stop the
stopwatch.
• Press and hold the button C to reset the
stopwatch.
O SETTING THE TIME (ANALOG)
• Use the button D to set the analog clock.
Pressing the button once will advance the
time by one minute. Press and hold the
button D to advance the time quickly. Press
the button D again to stop the quick mode.
O LIGHT
• Use the button A to turn on the light.
• The light will shine for 3 seconds after
pressing the button.
WARNINGS
• Do not disassemble or modify in any way.
• When the battery runs out, take the watch
to a designated repair shop for battery
replacement.
WARRANTY
The warranty is valid for 24 months. You can claim
it from DFVU d.o.o., Liparjeva 6a, 1234 Mengeš,
Slovenia, for a replacement product or a refund.
Send us your order number and purchase date in
the email, which is available by clicking on our logo
in the bottom right corner. The product has a
lifetime of 24 months from the date of collection.
WEEE disposal and recycling symbol. The
WEEE symbol is attached to the product
in compliance with the EU directive
2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE). It is
intended to deter the improper disposal
of this product and to promote reuse and
recycling.
  • Page 1 1
  • Page 2 2

SMANIA Wildranger Operating instructions

Brand
SMANIA
Model
Wildranger
Category
Watches
Type
Operating instructions

SMANIA Wildranger is a versatile watch with a range of features to help you stay organized and on time. With its 5 ATM waterproof rating, you can wear it even in wet conditions. The watch has several different functions and modes of operation: Time, date, alarm, time 2, and stopwatch. You can also use the light function to see the time in low-light conditions.

To set the time, press and hold the C button for 2 seconds when on the Time menu. The seconds will start flashing. Press the B button to set them to 00. Press the C button to switch between seconds, hours and minutes. Use the B button to set the correct time. Holding the B button will let you change the time faster. Change the mode from 12 to 24 H at the end of the menu. When you are done setting the time, press the C button to continue.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents