Husky HPL20B User manual

HPL20B
Husky
Brand
Husky
Model
HPL20B
Type
User manual

Husky HPL20B is a bottle jack with a 20-ton lifting capacity, designed for heavy-duty lifting tasks in various applications. It features a sturdy steel construction and a hydraulic system for smooth and controlled lifting. The jack is equipped with a release valve for easy lowering of loads and a saddle for stable support. Its compact design allows for easy storage and portability, making it suitable for use in tight spaces or on-the-go repairs.

Husky HPL20B is a bottle jack with a 20-ton lifting capacity, designed for heavy-duty lifting tasks in various applications. It features a sturdy steel construction and a hydraulic system for smooth and controlled lifting. The jack is equipped with a release valve for easy lowering of loads and a saddle for stable support. Its compact design allows for easy storage and portability, making it suitable for use in tight spaces or on-the-go repairs.

6, 12 & 20 TON BOTTLE JACK
Care and Cleaning
Maintenance
INSPECTION
The product shall be maintained according to these instructions. You may not alter this product in any way.
1. Before using, a thorough inspection shall be made on the jack. Look for cracks in the weld, bent, damaged,
loose, worn or missing parts.
2. Inspect according to this manual ONLY.
3. If the jack has been subjected to abnormal load or shock (abuse), perform an immediate inspection. Take
the product to a local customer service representative for an authorized inspection before use.
Monthly maintenance is recommended. Lubrication is critical to jacks as they support heavy loads.
Any restriction due to dirt, rust, etc., can cause either slow movement or cause extremely rapid jerks,
damaging the internal components. The following steps are designed to keep the jack well lubricated:
1. Lubricate the ram, linkages, saddle and pump mechanism with light oil. Grease bearings and axles.
2. Visually inspect for cracked welds, bent, loose, missing parts or hydraulic oil leaks.
3. Clean all surfaces and maintain all labels and warnings.
4. Check ram after each use for any sign of rust or corrosion. Clean as needed and wipe with an oil cloth.
When not in use, always leave the saddle and ram all the way down.
Always store your jack in the fully lowered position. This will help protect the critical areas from excessive
corrosion. Do not use brake or transmission uids or regular motor oil as they can damage the seals.
Always purchase and use hydraulic jack oil.
Opening Release Valve
1
Release valve must be turned counterclockwise
to allow the ram to fully retract. You may need
to press down on the saddle to lower.
Topping off Oil Level
3
Top pff, but do not overll, if needed.
Always use new, clean hydraulic jack oil.
Pumping the Handle
Remove the oil plug (back of jack)
while in a level position. Stand jack
vertically with handle socket down.
Oil should be level with bottom of the ll hole.
5
Check to see if jack works by pumping
handle up and down.
Removing the Oil Plug
2
Replace the oil plug.
Replacing the Plug
4
  • Page 1 1

Husky HPL20B User manual

HPL20B
Husky
Brand
Husky
Model
HPL20B
Type
User manual

Husky HPL20B is a bottle jack with a 20-ton lifting capacity, designed for heavy-duty lifting tasks in various applications. It features a sturdy steel construction and a hydraulic system for smooth and controlled lifting. The jack is equipped with a release valve for easy lowering of loads and a saddle for stable support. Its compact design allows for easy storage and portability, making it suitable for use in tight spaces or on-the-go repairs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents