Ergotron Notebook Lift Stand User manual

Category
Notebook arms & stands
Type
User manual

This manual is also suitable for

ABCDE
1
1x
1x
2x
1x 1x
4x
1x
Neo-Flex™ Notebook Lift Stand
User's Guide
888-33-290-W-00 revA • 06/08
1 of 5
2
3
Notebook Only
Notebook with Port Replicator
1
4x
2
2
ab
a
b
4
3
c
888-33-290-W-00 revA • 06/08
2 of 5
Notebook Only
Center equipment
horizontally on tray.
All pads must be attached
to the lift stand to prevent
equipment from sliding.
Place pads where bottom surface of
equipment will rest. Do not place pads
where equipment's feet will rest.
1
2
4
3
a
c
b
d
888-33-290-W-00 revA • 06/08
3 of 5
Notebook with port replicator
Center equipment horizontally on tray.
Problem Cause Solution
Display lifts up and down too
easily or with diffi culty.
Tension needs adjustment.
Adjust Lift
Exceeds weight capacity: 3.5 - 14 lbs
(1.6 - 6.4 kg).
4
5
2x
?
Trouble Shooting
4
888-33-290-W-00 revA • 06/08
4 of 5
RANGE OF MOTION - This product is designed to adjust quickly and easily according to your needs – refer to following steps for
adjustment. If it does not stay in place or movement is stiff, tension needs adjustment. Adjust until motion is equal.
RANGE OF MOTION - This product is designed to
adjust quickly and easily according to your needs.
5.9" (150 mm)
Lift – Up and down
360˚
Pan – Side-to-side
+15˚ -25˚
Tilt – Forward and Backward
To increase tension - Turn Clockwise
To decrease tension - Turn Counterclockwise
Adjust Lift – Up and down
NOTE: Screw might need to be turned
about 3 - 10 full revolutions before
noticing a change in tension.
Lift tray to "full up"
position before
adjusting.
888-33-290-W-00 revA • 06/08
5 of 5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Ergotron Notebook Lift Stand User manual

Category
Notebook arms & stands
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI