2. Computers & electronics
  3. Computer components
  4. System components
  5. Motherboards
  6. Samsung
  7. SV10

Samsung SV10 User manual

  • Hello! I am an AI chatbot trained to assist you with the Samsung SV10 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Intel(R) SpeedStep(TM) Technology [Automatic]
NumLock [Off]
Boot-time DiagnositScreen [Disabled]
QuickBoot Mode: [Enabled]
Summary screen: [Disabled]
Post Beep: [Disabled]
LAN Boot Initialization [Only with F12]
Graphics Mode Expansion [Enabled]
Text Mode Expansion [Enabled]
Display Configution [LCD]
Boot Device Priority
[Auto]
LCD brightness is
High when powered
by AC adapter.
LCD brightness is
Low when powered
by batteries only.
[High]/[Medium]/[Low]
LCD brightness is
set to specified
value at all times.
LCD Brightness [Auto]
Power Savings [Disabled]
Resume On Time [Off]
Resume Time [00:00:00]
Resume On Modem Ring [Off]
Wake On Lan [Off]
Low Battery Warning [Disabled]
Low Battery Suspend [Disabled]
LCD Lid Control [Backlight Off]
Smart Battery Calibration
<Tab>, <Shift-Tab>, or
<Enter> selects field.
System Time: [00:00:10]
System Date: [10/22/2001]
CPU Type Pentium(R) III-M
CPU Speed 866 Mhz
CPU Memory 512 KB
System Memory: 640 KB
Extended Memory: 121344 KB
System ID Sens V10
Bios Version XXXX-XX
Micom Version XXXX,XX XX
Supervisor Password Clear
User Password Clear
HDD 0 Password Clear
HDD 0 Password [Enabled]
Set Supervisor Password [Enter]
Set Uesr Password [Enter]
Set HDD 0 Password [Enter]
Password on boot: [Disabled]
Fixed disk boot sector: [Nomal]
Supervisor Password Clear
User Password Clear
HDD 0 Password Clear
HDD 1 Password HDD Password Not Support
HDD 0 Password [Enabled]
HDD 1 Password [Enabled]
Set Supervisor Password [Enter]
Set Uesr Password [Enter]
Set HDD 0 Password [Enter]
Password on boot: [Disabled]
Fixed disk boot sector: [Nomal]
Intel(R) SpeedStep(TM) Technology [Automatic]
NumLock [Off]
Boot-time DiagnositScreen [Disabled]
QuickBoot Mode: [Enabled]
Summary screen: [Disabled]
Post Beep: [Disabled]
LAN Boot Initialization [Only with F12]
Graphics Mode Expansion [Enabled]
Text Mode Expansion [Enabled]
Display Configution [ LCD]
Boot Device Priority
Boot Device Priority
+ Removable Devices
CD/DVD-ROM Drive
+ Hard Drive
/