Winners Only BWS3001Q Assembly Instructions

Brand: Winners Only

Model: BWS3001Q

Type: Assembly Instructions

Thank you for purchasing this quality product . Please read instructions thoroughly before unpacking assembly parts

Caution: Sharp, exposed staple tips can cause injury. Therefore, for your protection, please remove any exposed staples used in packing.Please

keep all hardware parts out of the reach of children.

1. We recommend that you should assemble this product with the assistance of another person; this will make assembly easier and will help to

prevent personal injury and to insure parts are not damaged during assembly process.

2. Before beginning,please check packing materials carefully for small parts that may have come loose inside the carton during shipping.Do not

discard any packing material until all parts have been located. If any parts are missing, please contact your dealer for prompt replacement.

3. To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residues and rough surfaces and also

check for staples or nails left after removing the packing materials .The manufacturer will not be held responsible if preventive steps are not

taken prior to installation.

4. Please do not over tighten screws or bolts. During normal use everyday, screws, bolts , nuts and wooden plugs may loosen up.They should be

periodically inspected and re-tightened to prevent damage to the furniture and (or) personal property or cause Always check to be sure all

hardware on this list and below mentioned components are attached to the furniture property and kept tightened.

5. Please lay all parts and hardware on a non-abrasive surface such as a carpet and follow the assembly.

NO. Q' TY

8pcs

8*19*2mm

Allen Key

24pcs

1pc

Hardware List

4*30*80mm

Allen Bolts

8mm

Spring Washers

Flat Washers 8pcs

DESCRIPTION SIZE SKETCH

Allen bolt 5/16" * 70mm 8pcs

DESCRIPTION

NO. Q' TY

A1pc

H Right Leg

Footboard

CHeadboard

1pc

Components List :

H Left Leg

5/16"*40mm

8pcs

Half moon

washer Ø5/16"

8pcs

Hexagon Ø5/16"*12mm

1pc

Wrench 12mm

Wood stretcher 1pc

Page 1 of 5 MADE IN VIETNAM

TIP: Store the Allen key and Wrench in assembly

in this product drawer or use masking or painter

tape to affix it to the underside of the product.

This will make it easier to find if you want to periodically

tighten bolts or disassemble the product.

WINNERS ONLY

ASSEMBLY INSTRUCTIONS

2pcs

"U" Bracket 64*59*52*2

4pcs

Wood Screw #8 * 20mm

6pcs

Wood Screw #8 *32mm

8pcs

Allen Bolts 1/4"*15mm

PROD.NO : BWS3001Q,BWX3001Q

Side rail 2pcs

3pcs

1pc

Slat Support Legs

Slat Support Bar

Slat Roll (13pcs) 1Set

Page 2 of 5 MADE IN VIETNAM

WINNERS ONLY

ASSEMBLY INSTRUCTIONS

FIG. 3

STEP 3: Attach the Headboard (C) to the Legs

assembly (A,B&D) using provided hardware as

shown on FIG.3

FIG. 1 2

FIG. 2

STEP 2: Attach the Wood Stretcher (D)

to both Headboard Legs (A&B) using

provided hardware as shown on FIG.2

STEP 1: Screw Metal Bracket to Wood Strecher (D) as shown in FIG.1

PROD.NO : BWS3001Q,BWX3001Q

827

Page 3 of 5 MADE IN VIETNAM

WINNERS ONLY

ASSEMBLY INSTRUCTIONS

FIG. 5

FIG. 4

STEP 4: Screw Metal Bracket to Footboard (E) as shown in FIG.4

PROD.NO : BWS3001Q,BWX3001Q

FIG. 5

STEP 5: Attach both Side Rails (F) to the Headboard

(A,B,D &C) and Footboard using the provided hardware as shown on FIG.5

FIG.6

Page 4 of 5 MADE IN VIETNAM

WINNERS ONLY

ASSEMBLY INSTRUCTIONS

FIG.7

STEP 7: Insert and screw Slats Support Bar (G)

to fit the metal bracket using provided hardware

as shown in FIG.7

PROD.NO : BWS3001Q,BWX3001Q

STEP 6: Attach the Slat Support Legs (H) to Slat Support Bar (G) as shown in FIG.6

WINNERS ONLY

ASSEMBLY INSTRUCTIONS

Page 5 of 5

FIG.8

MADE IN VIETNAM

Assembly is now completed.

PROD.NO : BWS3001Q,BWX3001Q

STEP 8: Attach the Slats Roll (I) to the Side Rails (G) using provided hardware as shown in FIG.8

Winners Only BWS3001Q Assembly Instructions

Winners Only BWS3001Q Assembly Instructions

Winners Only BWS3001Q Assembly Instructions

Related papers

Other documents