morse 201/20-A Operators Manual and Parts Diagram

Hello! I am an AI chatbot trained to assist you with the morse 201/20-A Operators Manual and Parts Diagram. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

The Specialist In Drum Handling Equipment

Model 1-5P

Idler Attachment

Morse part # 1-5P Idler Attachment

to roll a 1 to 5 gallon can on 201 series Portable Drum Roller

[email protected] 727 West Manlius St.

East Syracuse, NY, 13057 USA

morsedrum.com (315) 437-8475

Assembly Instructions

Fasten each roller base (item 1) onto the rotator 1.

channel as shown in diagram. Use the four bolts

(item 7) and four whiz-lock nuts (item 8) provided.

With the roller tube (item 2), collars (item 3), roller 2.

axle (item 4), tube bearing (item 5), and roller holder

(item 6) assembled as shown, slide both roller

holders (item 6) directly inside each roller base tube.

Tighten down both collars on roller holders (item 6).

Adjust large collars (item 3) on the roller tube (item 3.

2) far enough apart so that the can rolls between

them.

Adjust the drive wheels on the rotator to roll the can.4.