Phase Technology Power Lux PL-10p User guide

Brand: Phase Technology

Model: Power Lux PL-10p

Type: User guide

This manual is also suitable for

MSE Sound

User Manual

App Guide

Date: 9/13/23 • Revision 01

SoundTube Entertainment, LLC

13720 W. 109th St., Lenexa, KS 66215

855.663.5600

Contents

Section 1. - Connecting to the MA325 Amplier with MSE Sound App ....................................3

Section 2. - Adjusting the MA325 Amplier’s Volume Level .....................................................4

Section 3. - Setting Up the Appropriate Line Output Conguration for Your System ..............5

Section 4. - Using the Manual EQ ............................................................................................6

Section 5. - Adjusting Phase Control ........................................................................................8

Section 6. - Renaming your MA325 Amplier ...........................................................................9

Section 7. - Resetting your MA325 Amplier ........................................................................... 10

MSE Sound App Guide

Section 1: Connecting to the MA325 Amplier

with MSE Sound App

1. Turn on the MA325 Amplier using the main power switch.

2. Ensure Bluetooth is enabled on your mobile device.

3. Open the MSE Sound app on your mobile device.

The rst page will bring you to the pairing screen.

4. Click on the icon of the amplier.

The default name will be “MSE XXXX.”

Introduction

The “MSE Sound” application can be downloaded for free on your Android and iOS mobile devices.

Search “MSE Sound” in the Google Play Store (Android) and iTunes App store (iOS).

Audio Control of the MA325 amplier is intended to be through the “MSE Sound” app.

MSE Sound App Guide

5. Once you enter the Main Menu, you are now connected

to the MA325 Amplier, and the LED on

the back of the amplier should be solid BLUE.

6. The amplier’s LED behavior is as follows:

i. GREEN -- Subwoofer is ON and ready to play

ii. BLUE -- Subwoofer is connected to a mobile

device through the MSE Sound application

iii. RED -- Subwoofer is in STANDBY mode

iv. FLASHING RED -- Subwoofer is in PROTECT mode

Section 2: Adjusting the MA325 Amplier’s

Volume Level

1. Once on the Main Menu, the slider at top of the screen

controls the level. The knob on the amplier also controls

the level. The amplier will save the last known level input,

whether it be from the slider in the app or the physical level

knob on the amplier.

MSE Sound App Guide

Section 3: Setting Up the Appropriate Line Output

Conguration for Your System

1. At the top of the main menu, select

“Line Output Conguration”.

2. On this menu, there are two line output

conguration options.

3. Line Out Option One (Default): Wide Range Mode.

This mode will pass the input signal directly to the line

output, maintaining the connected speaker/amplier’s

individual conguration. A selectable high pass lter is

available to reduce the level of low frequencies sent to

the connected wide range speaker.

a. Common Congurations

i. Primary Subwoofer with Wide Range speaker

connected to Line Out

1. In this case, the high pass lter can be used to limit

the low frequencies sent to the Wide Range speaker.

ii. Primary Wide Range speaker with Wide Range

speaker(s) connected to Line Out

2. In this case, all Wide Range speakers maintain

their own conguration and ltering.

4. Line Out Option Two: Subwoofer Mode. This mode should

be used when there is more than one subwoofer in the sys-

tem, and the entire daisy chain consists of only subwoofers.

In this mode, the pre-amp signal is passed directly to the

line output. This allows for the primary subwoofer to control

the signal sent to the secondary subwoofer(s). All ltering,

Manual EQ, and level control will be passed to the second-

ary subwoofers. When selecting Subwoofer Mode, the user

must select the unit as a primary or secondary subwoofer(s).

a. Primary: This should be used for the rst subwoofer in the

daisy chain. This subwoofer should be directly connected

to the preamplier/power amplier/head unit.

This subwoofer should be used to control all secondary

subwoofers.

b. Secondary: This should be used on all additional sub-

woofers. All ltering, EQ, and level control will be man-

aged by the primary subwoofer.

MSE Sound App Guide

Section 4: Using the Manual EQ

1. From the Main Menu, select “Manual EQ” to enter the

Manual EQ Editor.

2. On the next page, click the plus icon to add the rst

“band” of the EQ. A total of 5 EQ “bands” are allowed.

3. The next page will prompt you to select the type of equaliza-

tion desired: Parametric EQ, Low shelving, High shelving, 12dB

highpass, or 6dB highpass. This example will continue with

Parametric EQ.

MSE Sound App Guide

4. On the next page, choose the frequency, Q factor, and gain

of the parametric EQ, then press “Save”. The below example

will add a boost of 3dB at 30Hz with a Q factor of 1.

5. To save the Manual EQ Editor to a permanent EQ preset,

hold down preset button 1 and click “YES” to

save the preset.

MSE Sound App Guide

6. The Manual EQ can be activated or deactivated at any

time by toggling the Manual EQ radio button in the

red circle below.

Section 5: Adjusting Phase Control

1. From the Main Menu, select “Phase Control”.

2. The slider on the following page allows for adjustment

between 0° and 180° of phase correction.

MSE Sound App Guide

Section 6: Renaming your MA325 Amplier

1. From the Main Menu, select “About”.

2. On the next page, click on the pencil icon.

3. Delete the default name, and enter your own.

4. The amplier will disconnect and return to

the pairing screen.

5. On the pairing screen, select the amplier with the

newly created name.

6. To reset to the default name, completely delete

your custom name.

MSE Sound App Guide

Section 7: Resetting your MA325 Amplier

1. From the Main Menu, select “About”.

2. On the next page, click “Factory Reset”.

3. The amplier will then reboot to default settings.

SoundTube® Entertainment by MSE Audio®

Phase Technology® by MSE Audio®

13720 W 109th St. | Lenexa, KS 66215

913-663-5600 or 855-663-5600 | mseaudio.com

Phase Technology Power Lux PL-10p User guide

Brand: Phase Technology

Model: Power Lux PL-10p

Type: User guide

This manual is also suitable for

Download PDF

report

Phase Technology Power Lux PL-10p User guide

This manual is also suitable for

Phase Technology Power Lux PL-10p User guide

Related papers

Other documents