HEAVY-DUTY TRUCK
SEAT COVERS
BY
FEATURING
SUPER-GRIP®
THE SLIP RESISTANT FASTENING SYSTEM
INSTALLATION INSTRUCTIONS
FOR
Oe3023/ SP8023/ TR4023/TRS4023
Thank you for purchasing one of our fine quality products. Your seat cover is engineered from high quality materials and designed
with precision to give you a long-lasting, well-adjusted fit.
The Super Grip Buckles are self-locking. For proper usage, see diagram:
BACKREST:
1) Move seat to most forward position
2) Slip cover over backrest – pull down firmly
3) Smooth tightly from top to bottom of backrest
4) Tuck flap through crevice and attach to Velcro at back
NOTE: FOR SEATS WITH ARMRESTS – THE BACKREST PORTION OF THE SEAT COVER HAS VELCRO
CLOSURES ON THE SIDE OF COVER TO ALLOW FOR FITTING AROUND ARMRESTS.
CUSHION:
1) Center cover over seat cushion
2) Lift cushion to up position
3) Pass front strap under seat and buckle to back strap
4) Pass side straps across the seat and buckle
5) Adjust all straps/buckles to equalize tension for a uniform fit
WASHING INSTRUCTIONS:
Hand wash using mild detergent and COLD WATER. Always drip dry. DO NOT DRY CLEAN.
WARNING:
NEVER INSTALL SEAT COVERS ON SEATS WITH BUILT-IN AIRBAGS AS THIS MAY INTERFERE WITH THE PROPER
DEPLOYMENT OF THE AIRBAGS.
Fia Inc. Winnipeg, Canada Telephone: (204) 475-0515 Toll-Free: 1-800-835-0438
Fax: (204) 284-8246 E-Mail: [email protected] Website: www.gofia.com 8-18-10
If you have any comments or concerns,
please feel free to contact our
customer service department at:
Toll-free: 1-800-835-0438
OR
Email: [email protected]
-
1
