2. Lexus
  3. 01-05 Quarter Trim Panel Interior and Ornamentation

Lexus 01-05 Quarter Trim Panel Interior and Ornamentation Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Lexus 01-05 Quarter Trim Panel Interior and Ornamentation Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1/6/23, 10:05 AM
Direct-Hit -- Search
https://dh.identifix.com/SearchFixes/Index?ROID=336257007&VID=2459084&VSM=2&LocationId=2&WorkflowPath=1&KW=actuator#KW=actuator&S…
1/5
REMOVAL AND INSTALLATION: AUX...
REMOVAL AND INSTALLATION: QUARTER TRIM PANEL (INTERIOR TRIM AND ORNAMENTATION)
501-05 Interior Trim and Ornamentation 2016 Expedition, Navigator
REMOVAL AND INSTALLATION Procedure revision date: 12/03/2016
Quarter Trim Panel
NOTE:Navigator shown, Expedition, Expedition EL and Navigator L similar.
Item Part Number Description
113560A Cup holder
213530A Utility tray
319N236B Power point
4 - Pin-type retainer
5601B32 Cover
631012A
/ 31012B
Rear quarter trim panel
Removal and Installation
All vehicles
1. Remove the C-pillar trim panel. For additional information, refer to C-Pillar Trim Panel in this section.
2. Remove the D-pillar trim panel. For additional information, refer to D-Pillar Trim Panel in this section.
3. NOTICE: To avoid damage to the liftgate scuff plate, remove any retaining clips from the body and attach them to the
liftgate scuff plate before installing.
Remove the liftgate scuff plate.
Lift the liftgate scuff plate upward to release the liftgate scuff plate retaining clips.
4. Remove the rear floor cargo space trim panel.
1/6/23, 10:05 AM
Direct-Hit -- Search
https://dh.identifix.com/SearchFixes/Index?ROID=336257007&VID=2459084&VSM=2&LocationId=2&WorkflowPath=1&KW=actuator#KW=actuator&S…
2/5
5. Remove the floor jack assembly.
Expedition EL/Navigator L
6. Remove the cargo space trim panel.
1. Move the cargo shelf to the upright position.
2. Remove the cargo space trim panel.
7. NOTE:RH cargo shelf bracket shown, LH similar.
Remove the LH and RH cargo shelf bracket bolts.
All vehicles
8. Remove the pin-type retainers and position aside the carpeting.
9. Remove the cargo space panel.
Remove the LH and RH bolts.
Remove the cargo space panel by pulling upward.
1/6/23, 10:05 AM
Direct-Hit -- Search
https://dh.identifix.com/SearchFixes/Index?ROID=336257007&VID=2459084&VSM=2&LocationId=2&WorkflowPath=1&KW=actuator#KW=actuator&S…
3/5
All vehicles except Expedition EL/Navigator L
10. Remove the third row seat safety belt anchor bolt.
To install, tighten to 40 Nm (30 lb-ft).
11. Remove the rear quarter trim panel pin-type retainer.
Expedition EL/Navigator L
12. Remove the third row seat safety belt anchor and scrivet.
Remove the third row seat safety belt anchor bolt.
To install, tighten to 40 Nm (30 lb-ft).
13. Remove the rear quarter trim panel bolt.
14. Open the third row safety belt anchor bolt cover.
15. Remove the third row seat safety belt anchor bolt.
To install, tighten to 40 Nm (30 lb-ft).
1/6/23, 10:05 AM
Direct-Hit -- Search
https://dh.identifix.com/SearchFixes/Index?ROID=336257007&VID=2459084&VSM=2&LocationId=2&WorkflowPath=1&KW=actuator#KW=actuator&S…
4/5
16. Remove the third row safety belt.
All vehicles
17. Remove the rear door scuff plate by pulling upward.
18. Remove the second row safety belt anchor.
Remove the second row safety belt anchor bolt.
To install, tighten to 40 Nm (30 lb-ft).
19. Fold the seat back of the third row seat to the full downward position.
20. NOTICE: To avoid damage to the quarter trim panel, remove any retaining clips from the body and attach them to the
quarter trim panel before installing.
Remove the rear quarter trim panel.
Disengage the rear clip on the base of the trim panel first, by pulling the bottom rear edge toward the center of the
vehicle.
Disengage the remaining clips.
If equipped, disconnect the electrical connectors.
21. NOTE:During installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to
the occupants.
To install, reverse the removal procedure.
Copyright © 2017 Ford Motor Company
1/6/23, 10:05 AM
Direct-Hit -- Search
https://dh.identifix.com/SearchFixes/Index?ROID=336257007&VID=2459084&VSM=2&LocationId=2&WorkflowPath=1&KW=actuator#KW=actuator&S…
5/5
This publication contains material that is reproduced and distributed under a license from Ford Motor Company. No further
reproduction or distribution of the Ford Motor Company material is allowed without the express written permission of Ford Motor
Company.
Copyright 2007 - 2018 Service Repair Solutions, Inc.
/