2. Mocet
  3. IG7600
IG7600

Mocet IG7600 Quick Installation Manual

  • Hello! I am an AI chatbot trained to assist you with the Mocet IG7600 Quick Installation Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How many analog phone lines can be connected to the Mocet IG7600 system?
    How can I set the IG7600's WAN to a static IP address?
    What ports need to be forwarded from the router to the IG7600?
    How can I configure DDNS (Dynamic DNS) in the IG7600?
    How do I install the M54 app on my iOS device?
    How do I register my M54 app with the IG7600 system?
IG7600
Smartphone Business
Communication
System
Copyright © 2015, All Rights Reserved.
Ver16141105
IG7600 Smartphone Business Communication System Quick Installation Guide
- 1 -
Installation Components
M22
IG7600 Smartphone Business Communication System Quick Installation Guide
- 2 -
System Installation
Follow the flowchart to install IG7600 system. The red number (1) ~ (8) is marked at upper
left corner of each process block. You can find the detail explanation by these numbers in
the following pages.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 3 -
(1) PSTN Lines Connection
You can connect up to four (4) analog (standard or PSTN) telephone lines to your IG7600.
Connect one line to each port, in the order that you want them to ring 1 – 4.
(2) Install IG7600 behind a router
Connect the WAN port of your IG7600 to your existing network, leave the LAN port
disconnected after using it for initial installation programming.
(IG7600 is connecting to a router) (IG7600 is connecting to a modem router)
Use the telephone line
cords to connect the
telephone lines to the
IG7600.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 4 -
Powering up
Plug the IG7600 in and allow it to power up without connecting any telephones. When the
power LED stops flashing the IG7600 will be fully powered up and operational.
Login Web page of IG7600
Use an Ethernet cable to connect your Personal Computer, Laptop or Desktop running
Windows XP, Vista or Windows7/8, to the LAN port of the IG7600.
Open your browser and enter 192.168.123.1 in the address bar, and press enter. When
prompted enter the user name, which is “admin1234” and password which is the word
“admin” plus the last 6 alphanumeric characters of the system’s “WAN MAC” address
(lower case), which is found on the label on the back of the system.
- Default IP address: 192.168.123.1
- User name: admin1234
- Password: adminxxxxxx
Attention: To secure your system against unwanted outside intrusion (hacking), we
strongly recommend that the first thing you do is change all of the System’s
Passwords! Before you begin programming you should change all three levels of
passwords, admin1234, support and user. A password of up to 16 alphanumeric
characters may be used and we recommend that you use at least 10.
The best passwords consist of upper and lower case characters and punctuation.
MAKE SURE TO MAKE A NOTE OF YOUR PASSWORD!
To change the password, log in as the Administrator go to:
For Example,
WAN MAC address: 001915DA73FB
Password: adminda73fb
IG7600 Smartphone Business Communication System Quick Installation Guide
- 5 -
Management --> Access Control --> Password
Default Login and Passwords:
Level/Rights Login Default
Password New Password
Administrator admin1234 adminxxxxxx
Administrator support supportxxxxxx
User (Limited) user userxxxxxx
xxxxxx = The last 6 alphanumeric characters of the system’s WAN MAC Address
(lower case)
IG7600 Smartphone Business Communication System Quick Installation Guide
- 6 -
(3) System Configuration
1. Set IG7600 WAN to static IP address
2. Set router’s Port Forwarding to IG7600 or DMZ Setting in router
1. Set IG7600 WAN to Static IP address
The existing network (Router) will assign an IP address to IG7600 WAN, set the IP
address to static IP in WAN page in IG7600.
Go to Advanced Setup -> WAN, and then change “Network Type” to Static.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 7 -
2. Set router’s Port Forwarding to IG7600 or DMZ Setting in router
The tablet lists these ports which are used by IG7600. These ports must be opened for
IG7600.
Used by Protocol
Port Range
IG7600-MOCET Changeable
Need port forwarding
(When behind NAT)
SIP UDP 5070 Y
Y
(Mandatory for remote phone
application)
RTP Proxy UDP 35000 ~ 35150 N
Y
(Mandatory for remote phone
application)
DSP Bound UDP 40000 ~ 40012 N
Y
(Mandatory for remote phone
application)
Paging Caller RTP
UDP 20500, 20510, 20520,
20530 N
Y
(Only when you need to enable
paging call function for remote
phone)
IGCP UDP 38600 N
Y
(Mandatory for remote phone
application)
IGDDP UDP 38500 N
Y
(Only when you deploy IGW
Group function)
IP Camera TCP 38800~38808 N
Y
(Only when you need to access
to IP Camera from remote phone
(M54))
PTC UDP 5897 Y
Y
(Only when you deploy
APS-PTC function)
Web TCP 80 Y
Y
(Only when you need accessing
Web server from remote)
FTP TCP 21 Y
Y
(Only when you need accessing
FTP server from remote)
TFTP UDP 69 Y Y
(Only when you need accessing
IG7600 Smartphone Business Communication System Quick Installation Guide
- 8 -
TFTP server from remote)
Telnet TCP 23 Y
Y
(Only when you need accessing
Telnet from remote)
SSH TCP 8822 Y
Y
(Only when you need accessing
SSH from remote)
Door Phone TCP 49003~49006
(reserved) N
Y
(Only when you need to access
to Door Phone from remote
phone)
Live Record UDP 35248, 35151~35248
N
Y
(Only when you need to enable
Live Recording function for
remote)
(4) Assign router WAN IP Address to NAT Traversal
When router WAN is a static IP address, setup the Router External Address to router
WAN IP in NAT Traversal page.
Step 1: Go to Voice --> NAT Traversal
Step 2: Setup the Router External Address to WAN IP address
Step 3: Uncheck UPNP Port-Mapping Enable
Step 4: Click “Save Settings” button.
-
Mapping Enable
.
Input router WAN IP address.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 9 -
(5) Router WAN Is Assigned a Dynamic IP
IG7600 Configuration
1 Setup DDNS
2 Assign DDNS Host Name to NAT Traversal
1. Setup DDNS
When the router’s WAN is assigned a dynamic IP from ISP (Internet Service Provider),
You need to configure DDNS (Dynamic DNS) in IG7600.
(If you don’t know what the network type is, please check with your ISP)
Step 1: Go to Advanced Setup --> Dynamic DNS
Step 2: Select “Use Manual DDNS” and then click “Save” button
Step 3: Click “Add” button
IG7600 Smartphone Business Communication System Quick Installation Guide
- 10 -
Step 4: Edit the DDNS information, and then click “Apply/Save” button.
2. Assign DDNS Host Name to NAT Traversal
Step 1: Go to Voice --> NAT Traversal
Step 2: Setup the Router External Address to DDNS host name
Step 3: Uncheck UPNP Port-Mapping Enable
Step 4: Click “Save Settings” button.
Uncheck UPNP Port-Mapping Enable.
Input DDNS host name. (For example:
kevintsou09.ddns.net.)
IG7600 Smartphone Business Communication System Quick Installation Guide
- 11 -
(6) IG7600 Installation Finish
The IG7600 network configuration is complete after you finish above steps.
In next steps, you will connect your Smartphone and IP phone to IG7600
system.
(7) M54 App Installation and Registration
1. M54 App Quick Installation for ios
- M54 App installation
- M54 App Setup
- Basic operation for M54 App
2. M54 App Quick Installation for Android
- M54 App installation
- M54 App Setup
- Basic operation for M54 App
IG7600 Smartphone Business Communication System Quick Installation Guide
- 12 -
M54 App Quick Installation for ios
Main interface of M54
Main interface of M54
No.
Feature Description
On-line
On-line and Call Forwarding is enabled
On-line and DND is enabled
Off-line
1 System Status Indicator
New voice message(s) available
2 System Status Indication
System prompts (registration, call progress, warning…)
Network condition indication
System Status Indicator (same as 1)
3 Extension Status It will be marked with red frame if the system phone is off-line and green frame if on-line
Grey Line is idle
Steady Line is currently used by you
Steady Line is busy
Fast flash Incoming call arrives, click to pick up
Slow flash Line is put on hold by me, click to retrieve
Slow flash Line is put on hold by others, click to answer
4 Line Status Indication
Fast flash Incoming call arrives but ringing on other extensions, click to pick up
the call
5 Call Log Call history, including
Call Made Received Missed
6 Other Functions
“IP-CAM”, “Paging”, “VM” and “Outdoor phone” functions can be activated from here. “Settings” to
configure your phone
7 Keypad To manually dial the numbers to make calls
Step 1
Connect your phone to IG7600’s Wi-Fi AP.
Using Wi-Fi settings of your phone.
(Search for IG7600-XXXXXX SSID).
Step 2
Download M54 from App Store and install application on
your phone.
Scan QR Code to download
M54 App for iPhone
IG7600 Smartphone Business Communication System Quick Installation Guide
- 13 -
Setup M54
1. Check IG7600 SSID
1-1. Tap “Next”
2. Enter your data
2-1. Tap “Next”
3. Press on on IG7600
3-1. Tap “Start Registration”
4. Check Registration Successful Msg.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 14 -
Making Calls
Managing calls
Turn on/off mute mode
Turn speaker on/off
Bring up the keypad
Put active call on hold
Transfer call to internal or external number
Establish a new call
5. Using green contact list
5-1. Tap to dial
6. Using Call Log
6-1. Tap to dial
7. Using keypad
7-1. Key in number
7-2. Tap “Dial”
IG7600 Smartphone Business Communication System Quick Installation Guide
- 15 -
Establishing a conference call
Conference call function is not
available at the free version.
Please purchase if needed.
Select Functions ->
Setup ->
Advanced Features ->
Conference
1. Tap New Call when on
active call
2. Tap green Or key in the number Tap “Dial”
3. Tap conference to
establish the conference
3-Way conference is established
IG7600 Smartphone Business Communication System Quick Installation Guide
- 16 -
Other functions
Tap to see the IP Cam list and choose camera to monitor
Tap to initiate a paging call
Tap to access voice message
Tap to access app’s settings
Tap to access outdoor phone settings
IG7600 Smartphone Business Communication System Quick Installation Guide
- 17 -
M54 App Quick Installation for Android Phone
Main interface of M54
Main interface of M54
No.
Feature Description
On-line
On-line and Call Forwarding is enabled
On-line and DND is enabled
Off-line
1 System Status Indicator
New voice message(s) available
2 System Status Indication
System prompts (registration, call progress, warning…)
Network condition indication
System Status Indicator (same as 1)
3 Extension Status It will be marked with red frame if the system phone is off-line and green frame if on-line
Grey Line is idle
Steady Line is currently used by you
Steady Line is busy
Fast flash Incoming call arrives, click to pick up
Slow flash Line is put on hold by me, click to retrieve
Slow flash Line is put on hold by others, click to answer
4 Line Status Indication
Fast flash Incoming call arrives but ringing on other extensions, click to pick up
the call
5 Call Log Call history, including
Call Made Received Missed
6 Other Functions
“IP-CAM”, “Paging”, “VM” and “Outdoor phone” functions can be activated from here. “Settings” to
configure your phone
7 Keypad To manually dial the numbers to make calls
Step 1
Connect your phone to IG7600’s Wi-Fi AP.
Using Wi-Fi settings of your phone.
(Search for IG7600-XXXXXX SSID).
Step 2
Download M54 from Google Play and install
application on your phone.
Scan QR Code to download
M54 App for Android Phone
IG7600 Smartphone Business Communication System Quick Installation Guide
- 18 -
Setup M54
1. Check IG7600 SSID
1-1. Tap OK
2. Enter your data
2-1. Tap Continue
3. Press on on IG7600
3-1. Tap Starting 4. Check Registration Successful Msg.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 19 -
Making Calls
Managing calls
Turn on/off mute mode
Turn speaker on/off
Bring up the keypad
Put active call on hold
Transfer call to internal or external number
Establish a new call
5. Using green contact list
5-1. Tap to dial
6. Using Call Log
6-1. Tap to dial
7. Using keypad
7-1. Key in number
7.2 Tap “Dial”
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/