General characteristics
Type
No. of cylinders
Diameter x stroke (mm)
Total displacement (c.c.)
Compression ratio
Maximum output
Continuous output
Maximum r.p.m.
Injection system
Cooling system
Electrical system
Maximum installation angle
Saltwater hose - inside diameter
Fuel hose - inside diameter
Leak off fuel hose - inside diameter
Diesel, 4-stroke
4 in line
94 x 120
3.331
22:1
65 HP (47.9 kW)
62 HP (45.6 kW)
2.500
Indirect
Fresh water cooling with heat
exchanger
12V – Starting motor 2.2 kW
Alternator 70 A
15º continuous / 20º intermittent
30 mm
8 mm
8 mm
Engine torque
Fuel consumption Gearbox model
Manufacturer
Type
Down angle
Reduction ratio (pleasure)
Reduction ratio (cont. duty)
Engine weight with gearbox
TM93
Twin Disc
Technodrive
Hydraulic
–
–
1.5:1 - 2:1 - 2.77:1
368 kg
1000 1500 2000 2500
210 N.m
200
190
180
170
160
21 kg.m
20
19
18
17
16
1000 1500 2000 2500
16 l/h
12
8
4
0
Power
1.8
kW HP
55
40
30
20
10
Note: Power as per ISO 3046/1
47.9 65
SMI-R3
Solé Diesel
T
Mechanical
–
2:1
–
345 kg
TM345/345A
Twin Disc
Technodrive
Hydraulic
– / 8º
1.5:1 - 2:1 - 2.5:1
–
340 kg
54.4
40.8
27.2
16 l/h
12
8
4
0
• Electrical starter, alternator, electrical stop and electrical stop and cabling
assembled on the engine
• Instrument panel
• 4 m cable harness
• Oil sump pump
• Engine rubber mounts
• Owner’s and part list manual
• Sea water cocks
• Water filter
• Diesel filter with separator
• Remote controls
• Propeller shaft
• Sterntube
• Propellers
• Exhaust system
• Front Pulleys
Standard equipment Optional equipment
Includes:
• Control panel with tachometer
• Hour meter
• Battery charge warning light
• Thermometer
• Acoustic and visual water and low oil pressure alarms
• Starter key
• Voltmeter
• Oil pressure gauge
Instrument panel
Dimensions (in mm)
Solé, S.A.
Ctra. de Martorell a Gelida, km. 2
08760 Martorell · Barcelona · Spain
Tel.: +34 93 775 14 00
Fax: +34 93 775 30 13
www.solediesel.com
Solé, S.A. strives to constantly improve its end
products, therefore the design, description, size,
configuration and other technical specifications
given here are only for informative purposes, and
should not be considered to be a binding offer
on the end product. The technical specifications
and the presentation are subject to variations and
changes without prior warning.