Teltone TLE-TEST User manual

Brand: Teltone

Model: TLE-TEST

Type: User manual

Telephone Line Emulator

TLE-TEST

User’s Manual

40-400-00025, Rev. D

Note

This manual covers Model TLE-A-01 software module TLE-TEST (Automated Test).

Trademarks

Teltone is a registered trademark of Teltone Corporation.

Windows is a registered trademark of Microsoft Corporation.

Other company and product names may be trademarks or

registered trademarks of their respective owners.

Teltone Corporation

Bothell, Washington 98021 USA

Customer Service: 425-951-3388

Technical Support: 425-951-3390

Fax: 425-487-2288

Email: [email protected]

Website: www.teltone.com

40-400-00025, Rev. D 1

Contents

Overview ..........................................................................................................................................3

New Features ...................................................................................................................4

Getting Started ........................................................................................................................................5

What’s on the API disk .....................................................................................................5

Serial Port.........................................................................................................................5

API Overview ..........................................................................................................................................6

Definitions.........................................................................................................................6

Command String Format..................................................................................................6

Messages .........................................................................................................................7

User Scripts......................................................................................................................8

Dial receivers....................................................................................................................9

Reset Button.....................................................................................................................9

API Commands .....................................................................................................................................10

TC_CONNECT...............................................................................................................10

TC_CONNECTAUDIOPORT .........................................................................................10

TC_DCSIGNAL ..............................................................................................................11

TC_DIALDETECT ..........................................................................................................11

TC_DISPLAY .................................................................................................................12

TC_PLAYMESSAGE .....................................................................................................13

TC_REQLEVEL..............................................................................................................13

TC_REQLINESTATE .....................................................................................................14

TC_REQVERSION .......................................................................................................14

TC_RING........................................................................................................................15

TC_SELECTCONFIG ....................................................................................................15

TC_SENDADSI ..............................................................................................................16

TC_SENDCALLERID.....................................................................................................16

TC_SENDCALLWAITING ..............................................................................................17

TC_SENDDTMF.............................................................................................................17

TC_SENDTONE.............................................................................................................18

TC_SENDVMW..............................................................................................................19

TC_SETAUDIOATTENUATION.....................................................................................20

TC_SETCALLERID_EVERYRING.................................................................................20

TC_SETCALLERID_MODE ...........................................................................................21

TC_SETCALLERID_NAME ...........................................................................................21

TC_SETCALLERID_SEQUENCE .................................................................................22

TC_SETCALLERID_TIME .............................................................................................23

TC_SETDTMFCADENCE..............................................................................................23

TC_SETDTMFTONES ...................................................................................................24

TC_SETECHO ...............................................................................................................24

TC_SETFLASHDETECTTIME.......................................................................................25

TC_SETFORCEDDISCONNECT ..................................................................................25

TC_SETHOOKTIMING ..................................................................................................25

TC_SETIMPEDANCE ....................................................................................................26

TC_SETLOOPCURRENT..............................................................................................26

TC_SETMETERCADENCE ...........................................................................................27

TC_SETMETERTONES ................................................................................................27

TC_SETOPENSWITCH .................................................................................................28

TC_SETRING.................................................................................................................28

TC_SETRXATTENUATION ...........................................................................................28

2 40-400-00025, Rev. D

Contents

TC_SETSATELLITEDELAY...........................................................................................29

TC_SETSWEEP ............................................................................................................29

TC_SETTIME_BUSY .....................................................................................................30

TC_SETTIME_CALLWAIT.............................................................................................30

TC_SETTIME_CAS .......................................................................................................31

TC_SETTIME_DIALTONE.............................................................................................31

TC_SETTIME_DIALTONEDELAY .................................................................................32

TC_SETTIME_NUMBERUNOB.....................................................................................32

TC_SETTIME_REORDER.............................................................................................33

TC_SETTIME_RING ......................................................................................................33

TC_SETTIME_SIT .........................................................................................................34

TC_SETTONE................................................................................................................34

TC_SETTONE_FSK ......................................................................................................35

TC_SETTONE_NUMBERUNOB ...................................................................................36

TC_SETTONE_SIT ........................................................................................................37

TC_SETTYPEWHITENOISE .........................................................................................37

TC_SETUNITNUMBER .................................................................................................38

TC_SETVMWAITTYPE..................................................................................................38

TC_SETWHITENOISE...................................................................................................39

Functions ........................................................................................................................................40

Function Summary .........................................................................................................40

Function TfLoopCurrent .................................................................................................41

Function TfMessage.......................................................................................................41

Function TfMeterConfig..................................................................................................41

Function TfRingConfig ...................................................................................................42

Function TfSigLevel .......................................................................................................42

Function TfLoopImpedance ...........................................................................................42

Script Details ........................................................................................................................................43

TS_DELAY .....................................................................................................................43

TS_ENDDEF ..................................................................................................................43

TS_EXECUTE................................................................................................................43

TS_RESTARTCONDITION............................................................................................44

TS_SCRIPTMODE.........................................................................................................44

TS_SCRIPTRUN............................................................................................................44

TS_STARTDEF..............................................................................................................45

TS_WAITDIAL................................................................................................................46

TS_WAITFLASH ............................................................................................................46

TS_WAITOFFHOOK......................................................................................................46

TS_WAITONHOOK........................................................................................................47

Script Examples ....................................................................................................................................48

Example of a Single Script For All Lines.......................................................................48

Example of a Dual Script:...............................................................................................50

Example of a Quad Script: .............................................................................................51

Default Configuration ............................................................................................................................53

Reference Tables..................................................................................................................................57

API Command Summary ...............................................................................................57

Script Function Summary...............................................................................................58

TLE Command Parameter Summary.............................................................................59

TLE Messages (TM_).....................................................................................................61

Line Messages ..............................................................................................................61

Multiple Message Format Call Setup Parameter Types ................................................62

Set Caller ID Mode Command Parameter Definitions (TC_SETCALLERID_MODE) ...63

Overview

40-400-00025, Rev. D 3

Overview

The Automated Test module allows the user to control the Telephone Line Emulator

(TLE) to perform specific tests that may be required in a development or production

environment. Users have access to all features in the TLE-BASE, TLE-ADV and the

TLE-INTL software. For example, the user may wish to test the ring detect threshold

for a particular CPE device. Commands could be sent to the TLE to perform the

following operations:

• Set ring frequency and amplitude for line 1.

• Start ringing on line1.

• Verify that ringing has been detected. (External to the TLE.)

• Stop ringing on line 1 if device goes off-hook or times out.

• Change ring frequency and/or amplitude for line 1.

• Repeat ring test.

Alternately, the user may wish to configure the TLE to perform a particular test

without a PC being connected. In this scenario, after the user has developed and

downloaded a script, the PC may be disconnected and the unit will perform whatever

action specified by that script. For example a production test user could verify that a

CPE device meets minimum ring detect requirements by programming a script to

perform the following :

• Set ring frequency and amplitude for minimum detect threshold at line .

• When off-hook is seen on line 2, start ringing on line 1.

• When off-hook is seen on line 1, stop ringing.

• When on-hook is seen on line 2, restart script.

The Automated Test features of the TLE allow the user to control the operation of the

TLE through the serial interface. To facilitate writing programs to control the TLE, an

Application Programming Interface (API) is provided which consists of definitions of

all commands and parameters which the TLE recognizes (in both Visual Basic and C

formats).

When the TLE is configured with the Automated Test software, it will not operate as a

stand alone TLE. All operation will be under control of the PC or user downloaded

scripts. The TLE will still accept programming commands from the standard TLE PC

software to allow for the user to pre-configure the stored TLE settings. The user

generated script(s) will have commands that select which stored configurations are

used by the TLE during the operation of the script. It is recommended that during

initialization of any script to select a configuration using TC_SELECTCONFIG to

load a configuration for each line.

NoteNote

Note: ANY changes made by the API are temporarily stored in a copy of the default

configuration loaded at power up or during TC_SELECTCONFIG. Changes made

during the running of an external or internal script are overwritten whenever

TC_SELECTCONFIG is used or when the TLE is reset.

Overview

440-400-00025, Rev. D

NeNe

New Fw F

w Fw F

w Featureseatures

eatureseatures

eatures

These new features were added to the TLE with the release of the TLE-TEST soft-

ware.

CompleComple

Complex Impedancesx Impedances

x Impedancesx Impedances

x Impedances

Added to the TLE Loop PLoop P

Loop PLoop P

Loop Parar

arar

arameters ameters

ameters ameters

ameters are the complex impedances for Australia,

Germany, and the United Kingdom. These parameters are loaded into the program-

mable SLIC used in the TLE. The details include:

Australia 220Ω + (820Ω || 120nF)

Germany (See Note) 220Ω + (820Ω || 310nF)

United Kingdom 370Ω + (620Ω || 310nF)

Under the TLE ScreensScreens

ScreensScreens

Screens menu, there is a new sub menu called AA

Automated utomated

utomated utomated

utomated TT

Testest

estest

est.

Upon selecting this option, a window appears with the following options.

DTMF GenerationDTMF Generation

DTMF Generation

The DTMF Generation feature allows for the setting of the frequency, signal level,

and On/Off timing for the Row and Column tones generated by a DTMF keypad.

These tone pairs include 1-9,0,#,*,A,B,C, and D. The TLE-Test module allows for the

user to send a DTMF string to a Line by using command TC_SENDDTMF,dtmfstring,

linenum

SwSw

Sweep eep

eep eep

eep

Toneone

oneone

one

The Sweep Tone feature is an additional Test Tone similar to the ones seen in PhonePhone

PhonePhone

Phone

NumbersNumbers

Numbers screen and allows for the setting of the Start Frequency, Range, Level, and

Time. The TLE-TEST software allows for the user to send a Sweep Tone to a Line

using command TC_SENDTONE,tonename,linenum[,fromline]

Note:Note:

Note: This complex impedance is also used in Switzerland

International Caller ID CommandsInternational Caller ID Commands

International Caller ID Commands

The purchase of the International (TLE-INTL) software and International Caller ID

(TLE-ICID) software will enable the TLE to execute International Caller ID commands

with the TLE in test mode.

Getting Started

40-400-00025, Rev. D 5

Getting Started

What’What’

What’s on the API disks on the API disk

s on the API disks on the API disk

s on the API disk

The API consists of source code to assist in creation of programs to talk to the TLE.

This code includes definitions of all of the TLE commands, parameters and mes-

sages, plus the source code to the functions outlined in this manual.

The API disk contains the following (uppercase are directories, lowercase are files):

TLEAPI

C_API

auto.h Definitions of all TLE commands, parameters, and

messages

auto.cpp Source code for supported functions (see FUNC -

TION DETAILS section of this manual) in C format.

VB_API

auto.bas Definitions of all TLE commands, parameters, and

messages, plus source code for supported functions

in Visual Basic format.

SAMPLE

readme.txt Text file with details about the sample code and

operation of the sample program. Read this file for

information about the full contents of this directory.

DATA

tfloopc.000 Data file used by TfLoopCurrent function.

tfloopi.00 Data file used by TfLoopImpedance function.

tfloopi.01 Data file used by TfLoopImpedance function.

tfloopi.02 Data file used by TfLoopImpedance function.

tfloopi.03 Data file used by TfLoopImpedance function.

tfloopi.04 Data file used by TfLoopImpedance function.

tfmeter.000 Data file used by TfMeterConfig function.

tfring.000 Data file used by TfRingConfig function.

The C files were created using Microsoft Visual C++. The VB files and sample

program were created with Microsoft Visual Basic 3.0.

The data files are binary files used by the designated functions, and must be distrib-

uted with any programs written to talk to the TLE. The function routines provided

expect to find these files in the execution directory of the application.

SerSer

Serial Pial P

ial Pial P

ial Poror

oror

ortt

The serial port on the TLE is configured as follows:

Baud Rate 9600

Data bits 8

Parity None

Stop Bits 1

Flow Control Hardware (RTS/CTS)

The TLE does not echo characters back to the user.

API Overview

640-400-00025, Rev. D

API Overview

The TLE PC software program edits the stored configurations (non-volatile) in the

TLE and the API edits and uses a copy of the stored configuration(s) that is lost

when power is turned off. External and internal scripts should initially use

TC_SELECTCONFIG to load a copy of the appropriate stored configuration for each

line of the TLE. User scripts ARE saved in the TLE non-volatile memory.

Each line may use a separate configuration from the stored configurations for its

default values. Some parameters, however, are global and may not be changed on a

per-line basis. These global parameters will always use the configuration selected for

line 1. The global parameters are those associated with TC_SET commands which

do not include a “linenum” parameter.

DefinitionsDefinitions

Definitions

The API will contain definitions for all automated test commands and parameters.

Definitions fall into four categories:

TC_ TT

TLE CC

Commands Commands sent to the TLE.

TP_ TT

TLE PP

Parameters Parameters to be sent with commands.

TM_ TT

TLE MM

Messages Messages sent from the TLE.

TS_ TT

TLE SS

Script operations Operations to be entered into a script within

the TLE.

Command String Format.Command String Format.

Command String Format.

All commands sent to the TLE consist of numeric values, preceeded by a colon “:”

followed by the appropriate unit number. Programs should wait for a response to a

command before sending the next command to the TLE.

Each programming and operational command string sent to the TLE will follow a

structure as follows:

:unitnumber,commandnumber,parameter_1…parameter_n<cr/lf>

Unitnumber: Unique ID given to TLE by the user.

0 All TLE’s will respond to commands with ID 0

1-255 Only those TLE’s with matching ID’s will respond

Commandnumber: Command number provided by API for each TLE command.

Parameter_1…parameter_n: Command parameters. See individual commands for

details.

The TLE will work correctly with Carriage Return or Line Feed or both as a termina-

tor. When the TLE receives a command, it will return either a Command Acknowl-

edge, Invalid or Error message. The TLE will not respond to any command string that

does not begin with a colon “:”, followed by the appropriate unit number. Programs

should wait for a response to a command before sending the next command to the

TLE.

NoteNote

Note: While most commands return the confirmation, error or invalid response

immediately, a few commands will delay the confirmation until completed. These are

noted in the command details section.

API Overview

40-400-00025, Rev. D 7

Example:

In Visual Basic, the user would create a command string as follows, using the defined

constants.

Command_string =

:0,&TC_SENDTONE&,&TP_BUSY&,&TP_LINE1&chr(13)

This would compile to a command string that would be sent to the TLE as shown

below.

command_string =

:0,13,16,1<ret>

MessagesMessages

Messages

The TLE sends system and line messages to the PC to inform the user of specific

events which have occurred. These events include such things as on-hook, off-hook,

flash detected, dialed digits, etc. The TLE also responds to commands with an

appropriate command response message.

All messages sent by the TLE consist of numeric values preceeded by an exclama-

tion “!” and terminated with a <cr> and <lf>. To assist in program development, the

API contains constants defined for all messages, and a function (TfMessage) for

converting System and Line messages to readable text.

The TLE will send messages to the user through the serial port. Messages are sent

as numbers, which the user can convert to text strings using the TfMessage function.

System MessagesSystem Messages

System Messages

System messages provide information about the operation of the TLE, and follow the

following format:

!unitnumber,messagetype,Y,P<cr><lf>.

Unitnumber: Unique ID given to TLE by the user.

0,1-255 If no unit number is assigned, TLE returns 0.

messagetype: 0 for system messages

Y: message number (up to 3 digits)

P: variable length parameter string (see individual messages for details)

Line messagesLine messages

Line messages

Line messages provide information about events that pertain to individual lines, and

follow this format:

!unitnumber,messagetype,Y,P<cr><lf>.

Unitnumber: Unique ID given to TLE by the user.

0,1-25: If no unit number is assigned, TLE returns 0.

messagetype: the line number 1 - 4

Y: message number (up to 3 digits)

P: variable length parameter string (see individual messages for details)

API Overview

840-400-00025, Rev. D

Command responsesCommand responses

Command responses

The command response messages give the user feedback about the last command

that was executed by the TLE. These messages use the following format:

!unitnumber,messagetype,X,Y<cr><lf>

Unitnumber: Unique ID given to TLE by the user.

0,1-255 If no unit number is assigned, TLE returns 0.

messagetype:

7 Invalid state. The line the command was directed at was in a

state that was invalid for the function (ie: trying to send

ringing to an off-hook line, no dial receiver available,etc.) or

the command can not be run at this time (script commands

while scripts not running, etc).

8 Command accepted

9 Error

X: 0 if under PC control:

Script number (1-4) if running from a script

Y: Command number (up to 3 digits)

Note:Note:

Note: The Tfmessage function does not interpret command response messages.

User ScrUser Scr

User Scriptsipts

iptsipts

ipts

The TLE supports downloadable scripts for custom standalone operation. Three

scripting modes are available; a single script mode, which allows only one script that

can access all four lines, a dual script mode which allows two scripts that each

accesses two lines, and a quad script mode where there is a separate script for each

line. These scripts are saved in the TLE non-volatile memory. If TS_SCRIPTRUN has

been enabled, the scripts will automatically start when power is applied to the TLE.

When a running script reaches its end, it will automatically restart.

Before entering any scripts into the TLE, a TS_SCRIPTMODE command must be

sent to select single, dual, or quad script mode. To enter the actual scripts, a

TS_STARTDEF is sent first, followed by the desired script functions, and ending with

a TS_ENDDEF. All commands between the TS_STARTDEF and TS_ENDDEF must

be script functions. To include any of the other TLE commands as part of a script, it is

included as a parameter to the TS_EXECUTE script function.

Once all of the scripts are entered into the TLE, the TS_SCRIPTRUN is used to start

and stop the scripts. While scripts are running, the TS_SCRIPTRUN is the ONLY

command which is recognized by the TLE (to allow the user to stop the script). If the

user has started the scripts and then removed power from the TLE, the scripts will

automatically restart when power is re-applied.

See Script Examples section for more information.

ImporImpor

Important:tant:

tant:tant:

tant:

The TLE must be in Automated Test mode before entering commands or

scripts. A "System Offhook" message is given if not in the correct mode.

API Overview

40-400-00025, Rev. D 9

Dial receiversDial receivers

Dial receivers

The TLE can only detect DTMF digits on two lines at any time. The DTMF receivers

will be assigned on a first-come first-served basis. The DTMF receiver will remain

assigned until released by the user except under the following conditions:

If Caller ID with Call Waiting is sent, a DTMF receiver is automatically assigned to the

line, and is then released when completed.

If an ADSI script is sent, a DTMF receiver is automatically assigned to the line, and is

then released when completed. If no receiver is available, the TLE will respond with

an INVALID command response.

See the TC_DIALDETECT command for the format of the assign command.

Reset ButtonReset Button

Reset Button

The front panel reset button will set all configurations to factory defaults, and will

clear the unit ID and all scripts.

API Commands

10 40-400-00025, Rev. D

API Commands

TC_CONNECTTC_CONNECT

TC_CONNECT

FormatFormat

Format TC_CONNECT,linenum,tolinenum

DescriptionDescription

Description Connects the audio path between line linenum and line tolinenum. If line linenum is already

connected to another line, linenum will be added to that connection.

Parar

arar

arameterameter

ameterameter

ameter Linenum: line to connect

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

Tolinenum: line to connect to

TP_OFF

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

ExampleExample

Example This example connects line 1 to line 2:

TC_CONNECT,TP_LINE1,TP_LINE2

This adds line 3 to the connection:

TC_CONNECT,TP_LINE3,TP_LINE2

This disconnects line 2, leaving the connection between lines 1 and 3:

TC_CONNECT,TP_LINE2,TP_OFF

NoteNote

Note Establishing a connection from an off-hook line to multiple on-hook lines may result in exces-

sive feedback (noise) being heard at the off-hook line. The PC control program should

monitor the line hook states and disconnect lines which have gone on-hook. Alternately, if

the line-to-line attenuation is increased, this condition will not occur.

TC_CONNECTTC_CONNECT

TC_CONNECTAA

AUDIOPORUDIOPOR

UDIOPORUDIOPOR

UDIOPORTT

FormatFormat

Format TC_CONNECTAUDIOPORT,linenum

DescriptionDescription

Description Connects a line to the audio output port.

Parar

arar

arameterameter

ameterameter

ameter Linenum: line number

TP_OFF

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

ExampleExample

Example This example connects line 1 to the audio port:

TC_SETAUDIOPORT,TP_LINE1

This disconnects line 1 and connects line 2 to the audio port:

TC_SETAUDIOPORT,TP_LINE2

This disconnects line from audio port:

TC_SETAUDIOPORT,TP_OFF

API Commands

40-400-00025, Rev. D 11

TC_DCSIGNALTC_DCSIGNAL

TC_DCSIGNAL

Foror

oror

ormatmat

matmat

mat TC_SIGNAL,signaltype,linenum

DescrDescr

Descriptioniption

iptioniption

iption Sets the DC loop state. The forced disconnect is momentary depending upon the pro-

grammed timings for forced disconnect. All others are permanent states. The forced discon-

nect command will only be accepted if the line is in the off-hook state.

Parar

arar

arameterameter

ameterameter

ameter Signaltype: DC loop state

TP_FORCEDDISCONNECT

TP_OPEN

TP_REVERSE

TP_NORMAL

Linenum: line number

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

ExampleExample

Example This example sets reversed polarity on line 2:

TC_DCSIGNAL,TP_REVERSE,TP_LINE2

NoteNote

Note The confirmation for this command is sent immediately for all signal types except

TP_FORCEDDISCONNECT. For TP_FORCEDDISCONNECT the confirmation is sent at the

completion of the forced disconnect pulse.

See AlsoSee Also

See Also TC_SETHOOKTIMING, TC_SETLOOPCURRENT, TC_DCSIGNAL, TM_OFFHOOK,

TM_ONHK

TC_REQVERSIONTC_REQVERSION

TC_REQVERSION

FormatFormat

Format TC_REQVERSION

DescriptionDescription

Description Requests the firmware version number string from the TLE.

ReturnsReturns

Returns TM_VERSION

ExampleExample

Example This example requests the version numbers of the boot code, microcontroller code and DSP

code:

TC_REQVERSION

See AlsoSee Also

See Also TC_SETTIME_RING, TC_SETRING, TC_SETTONE, TC_SENDTONE,

TC_SETCALLERID_EVERYRING

TC_SELECTCONFIGTC_SELECTCONFIG

TC_SELECTCONFIG

FormatFormat

Format TC_SELECTCONFIG,config,linenum

DescriptionDescription

Description Selects pre-programmed configuration to use for default values.

Parar

arar

arameterameter

ameterameter

ameter Config: configuration

1-16

Linenum: line to set configuration for

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

ExampleExample

Example Sets the configuration for line 1 to configuration 1:

TC_SELECTCONFIG,1,TP_LINE1

NoteNote

Note The TLE-ICID parameters set for line 1 for the configuration selected will be the same for all

the lines. For example, selecting a different configuration for line 2 will change all parameters

except for the TLE-ICID parameters; they will be identical to line 1.

API Commands

16 40-400-00025, Rev. D

TC_SENDTC_SEND

TC_SENDADSIADSI

ADSIADSI

ADSI

FormatFormat

Format TC_SENDADSI,linenum

DescriptionDescription

Description Sends an ADSI script to the selected line. This command will only be accepted if the line is in

the off-hook state.

Parar

arar

arameterameter

ameterameter

ameter Linenum: line number

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

ExampleExample

Example This example sends an ADSI script to line 2:

TC_SENDADSI,TP_LINE2

NoteNote

Note The phone must be off-hook for an ADSI script to be sent. The confirmation for this com-

mand is sent after the ADSI script has been sent to the line.

TC_SENDCALLERIDTC_SENDCALLERID

TC_SENDCALLERID

FormatFormat

Format TC_SENDCALLERID,linenum,fromline

DescriptionDescription

Description Sends a pre-programmed Caller ID sequence.

Parar

arar

arameterameter

ameterameter

ameter Linenum: line number

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

Fromline: line whose Caller ID is being sent

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

ExampleExample

Example This example sends line 4’s Caller ID to line 3:

TC_SENDCALLERID,TP_LINE3,TP_LINE4

NoteNote

Note The confirmation for this command is sent after the Caller ID has been sent to the line.

See AlsoSee Also

See Also TC_RING, TC_SETCALLERID_EVERYRING, TC_SETCALLERID_MODE,

TC_SETCALLERID_NAME, TC_SETCALLERID_SEQUENCE, TC_SETCALLERID_TIME

API Commands

40-400-00025, Rev. D 17

TC_SENDCALLTC_SENDCALL

TC_SENDCALLWW

WAITINGAITING

AITINGAITING

AITING

Foror

oror

ormatmat

matmat

mat TC_SENDCALLWAITING,callwaittype,linenum,fromline

DescrDescr

Descriptioniption

iptioniption

iption Sends Call Waiting sequence.

Parar

arar

arameterameter

ameterameter

ameter Callwaittype: Selects which Call Waiting cadence to send.

TP_CWNORMAL

TP_CWDISTINCTIVE

Linenum: line number

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

Fromline: line whose Caller ID is being sent

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

ExampleExample

Example This example sends Distinctive Call Waiting to line 4:

TC_SENDCALLWAITING,TP_CWDISTINCTIVE,TP_LINE4

NoteNote

Note The confirmation for this command is sent after the Call Waiting sequence has been sent to

the line.

See AlsoSee Also

See Also TC_SETTONE, TC_SETTIME_CALLWAIT

TC_SENDDTMFTC_SENDDTMF

TC_SENDDTMF

FormatFormat

Format TC_SENDDTMF,dtmfstring,linenum

DescriptionDescription

Description Sends a string of DTMF digits. This command will only be accepted if the line is in the

off-hook state.

Parar

arar

arametersameters

ametersameters

ameters DTMFstring: digit string to send

1-16 digits (0-9,*,#,ABCD)

Linenum: line number

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

ExampleExample

Example This example sends 5551212 to line 4:

TC_SENDDTMF,5551212,TP_LINE4

NoteNote

Note The confirmation for this command is sent after the DTMF has been sent to the line.

See AlsoSee Also

See Also TC_SETDTMFCADENCE,TC_SETDTMFTONES.

API Commands

18 40-400-00025, Rev. D

TC_SENDTTC_SENDT

TC_SENDTONEONE

ONEONE

ONE

Foror

oror

ormatmat

matmat

mat TC_SENDTONE,tonename,linenum[,fromline]

DescrDescr

Descriptioniption

iptioniption

iption Sends specified tones to the line. Tones are sent with programmed cadences. Dial tone will

turn off automatically upon detection of valid DTMF or rotary dialing (if a receiver was as-

signed). A SIT sequence is sent once, all others will continue until superceded by a new

TC_SENDTONE command or until the hook state transitions from off-hook to on-hook. All

tones are sent whether the line is currently off-hook or on-hook, except those with the

_ATOFFHOOK suffix, which are sent after the defined dial tone delay when off-hook is

detected.

Parar

arar

arametersameters

ametersameters

ameters Tonename: tone to send

TP_OFF

TP_DIALTONE

TP_DIALTONE_NORMAL

TP_DIALTONE_RECALL

TP_DIALTONE_MESSAGEWAIT

TP_DIALTONE_CONFIRM

TP_DIALTONE_ATOFFHOOK

TP_DIALTONE_NORMAL_ATOFFHOOK

TP_DIALTONE_RECALL_ATOFFHOOK

TP_DIALTONE_MESSAGEWAIT_ATOFFHOOK

TP_DIALTONE_CONFIRM_ATOFFHOOK

TP_NUMBERUNOB

TP_RINGBACK Note: requires fromline parameter

TP_RINGBACK_GROUP1 Note: requires fromline parameter

TP_RINGBACK_GROUP2 Note: requires fromline parameter

TP_RINGBACK_GROUP3 Note: requires fromline parameter

TP_BUSY

TP_REORDER

TP_SIT

TP_SWEEP

TP_TEST

Linenum: Line number

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

Fromline: For ringback, line whose ringback cadence to use

TP_LINE1

TP_LINE2

TP_LINE3

TP_LINE4

ExampleExample

Example This example sends dial tone to line 1:

TC_SENDTONE,TP_DIALTONE,TP_LINE1

This sends ringback tone to Line 1 at the cadence of the ringing set for Line 2:

TC_SENDTONE,TP_RINGBACK,TP_LINE1,TP_LINE2

This replaces ringback by SIT sequence then silence:

TC_SENDTONE,TP_SIT,TP_LINE1

Page is loading ...

Teltone TLE-TEST User manual

Brand: Teltone

Model: TLE-TEST

Type: User manual

Download PDF

report

Teltone TLE-TEST User manual

Teltone TLE-TEST User manual

Related papers

Other documents