Sunstech Madia User manual

Page is loading ...

MADIA

English User Manual

1

Inside the box

1 x MADIA player

1 x Earphone

1 x USB cable

1 x CD

1 x English manual

1 x Clip

1 x Armband

2

Content

Button locations and usages

Basic Operation

Power on and off

Pedometer

Text

Music

Video

Driver and Software Utilities Installation

Converting different video format to .AMV

Recorder

Voice

FM Radio

Photo

System

Technical Specification

Trouble Shooting

3

Button locations and usages

(12) 1.5” Color Display

(13) Menu / Select

(14) Previous / Backward

(15) Volume control

(16) Next / Forward

(17) USB port

(18) Earphone jack

(19) Strap hole (strap not included)

(20) Main power switch

(21) Loudspeaker

(22) MicroSD card slot

4

Basic Operation

Power on and off

z To power on the player, slide the main power

switch to “ON”. During standby mode, long

press >|| for 3 seconds to turn on the player.

z To power off the player, slide the main power

switch to “OFF” or long press >|| until the player

is turned off.

Insert and pull out a MicroSD card

With the player powered off,

z Insert the card into the card slot gently with the

card’s gold contacts facing up.

z Pull out the card by slightly pushing it inwards,

the card will bounce by a section, and then you

can pull it out.

Caution: Inserting or pulling out a microSD card

during the player is under operation or is powered on

will cause memory loss or data corrupt or damages

on the microSD card.

5

Pedometer

From main menu, press |<< or >>| to select

“Pedometer” and press M to enter the menu where

you will see:

z Time (press >|| to start counting and press >||

again to stop counting)

z Steps (count the total steps taken during

counting)

z Path L.G. (count the total path length by meter

during counting)

z Energy (count the total calories consumed

during counting).

Pedometer setup

Exit to the main menu, press |<< or >>| to select

“System” and press M to enter. Press |<< or >>| to

select “Pedometer set” and press M to enter the

sub-menu where you will find settings:

z Step size (enter user’s step distance)

z Weight (enter user’s weight)

z Units (select between Metric system and

Imperial system for data entry)

6

Text

Text mode can support .txt document files only.

From main menu, press |<< or >>| to select “Text”

and press M to enter to the list of text files. Press

|<< or >>| to select a desired file and press >|| to

enter.

During text reading, press |<< or >>| to scroll up or

down the page. During text reading, press M to

enter a sub-menu where you will find settings:

z Bookmark select (start reading from a

particular bookmark page)

z Bookmark delete (delete a particular

bookmark)

z Bookmark add (add a bookmark to the current

reading page)

From the list of text files, press M to enter a

sub-menu where you will find settings:

z Card folder (see the list of all text files)

z Playback set (select from manual play or auto

play)

z Delete file (delete a particular text file)

z Delete all (delete all text files)

7

Music

Music mode can support .MP3, and .WMA, audio

files only.

From main menu, press |<< or >>| to select “Music”

and press M to enter to the playing menu. Press |<<

or >>| to select your desired file and press >|| to start

playback; press >|| again to pause.

Volume control - During music playback, press V to

enter volume level bar, press |<< or >>| to adjust the

volume level and press >|| to continue playback.

Sub-menu

(1) In playing menu, during music pause, press M to

enter a sub-menu where you can select or delete

files.

(2) In playing menu, during music playback, press M

to enter a sub-menu where you can

setup:

z Repeat (Normal / Repeat one / Folder / Repeat

Folder / Repeat All / Random / Intro)

z Equalizer (Natural / Rock/ Pop / Classic / Soft /

Jazz / DBB)

8

z Replay mode (Repeat mode for A-B repeat

setting / Repeat times / Replay gap)

HINT: press |<< or >>| to navigate and short press

M to select your choice and long press M to exit to

main menu.

Video

Video mode can support .AMV video files only.

From main menu, press |<< or >>| to select “ Video”

and press M to enter to the playing menu. Press |<<

or >>| to select your desired file and press >|| to start

playback and press again >|| to pause.

During playback, long press |<< for fast backward

and long press >>| for fast forward. Release the

button to return to normal playback speed.

Volume control - During playback, press >|| to pause,

then press V to enter volume level bar. Press |<< or

>>| to adjust the volume level and press >|| to return

to playing menu; press >|| to continue playback.

9

In playing menu, press M to enter a sub-menu where

you can select or delete files or setup repeat mode by

Normal / Repeat one / Folder / Repeat Folder /

Repeat All / Random / Intro.

HINT:

z press |<< or >>| to navigate and short press M

to select your choice and long press M to exit to

main menu.

z This player only supports .AMV video file

format. Other video formats must be

converted to .AMV format by the video

converter provided inside the CD ROM.

Driver and Software Utilities Installation

If you are using Windows¨ 98/98SE, you must install

the driver before you can download any files to your

player.

**If you are using Windows above 98/98SE, you may

skip the following installation procedures.

(4) Insert the CD into the CD ROM drive of your PC.

Double click “Setup.exe” to start the driver

installation.

10

(5) Follow thru the on-screen menu to complete the

installation steps.

(6) Click “Close” once you reach the Installation

Complete screen.

Converting different video format to .AMV video

(6) After installing the driver and software utilities,

click “Start”.

(7) Select All Programs > MP3 Player Utilities >

AMV Convert Tool.

(8) Click “Input File” to select the video file you want

to convert to an .AMV format.

(9) Click “Output File” to set the designated location

to save the converted file.

(10) Click “Convert” to start the converting process.

You will see .AMV video file is being converted

and saved to the designated location once

completed.

11

Note:

The video converter provided in the CD can

convert .DAT, .WMV, .AVI video format into .AMV

format. If the resolution of the video file is less than

160x120, the converter may not be able to convert it

to .AMV format successfully.

Record

Recorder can create .WAV audio files only.

From the main menu, press |<< or >>| to select

“Recorde” and press M to enter to the Recorder

menu. Press >|| to start recording and press again

to pause and press again to continue recording, etc.

When recording is completed, long press >|| and you

will see “Saving” appears then the screen will return

to recorder menu automatically. A .WAV file you

just recorded is stored.

12

Voice

Voice mode can support .WAV audio files only.

To playback the recorded file, go to main menu,

select “Voice” and press M to enter to the Voice

menu.

Press |<< or >>| to select the desired .WAV file.

Press >|| to start playback and press >|| again to

pause.

Volume control - During voice playback, press V to

enter volume level bar, press |<< or >>| to adjust the

volume level and press >|| to continue playback.

Sub-menu

(1) In playing menu, during pause mode, press M to

enter a sub-menu where you can select or delete

files.

(2) In playing menu, during playback, press M to

enter a sub-menu where you can setup:

z Repeat (Normal / Repeat one / Folder / Repeat

Folder / Repeat All / Random / Intro)

z Replay mode (Repeat mode for A-B repeat

setting / Repeat times / Replay gap)

HINT: press |<< or >>| to navigate and short press

M to select your choice and long press M to exit to

main menu.

13

FM Radio

From main menu, press |<< or >>| to select “FM

Radio” and press M to enter the FM frequency bar.

Press |<< or >>| by step to search a radio station

manually, or long press |<< or >>| to auto scan a

radio station.

To adjust volume control, press V to enter volume

level bar, press |<< or >>| to adjust the volume level

and press >|| to exit.

Press M to enter a sub-menu where you will find

settings:

z Save (to store a radio channel)

z FM record (to record a radio signal)

z Delete Channel (to delete a stored radio

channel)

z Delete all (to delete all the stored radio

channels)

z Auto Search (to scan a radio channel)

z Normal Band (to show the frequency bar

between 87.0 and 108.0MHz)

z Japan Band (to show the frequency bar

between 76.0 and 90.0 MHz)

14

Photo

Photo mode can support .JPG, .BMP and .GIF image

files only.

From the main menu, press |<< or >>| to select

“Photo” and press M to enter to the list of photo files.

Press |<< or >>| to select a photo file and press >|| to

view the photo. During photo viewing, press |<< or

>>| to go to the previous or the next photo.

From the list of photo files, press M to enter a

sub-menu where you will find settings:

z Local folder (to the list of all photo files)

z Playback set (Manual Replay / Auto Replay)

z Delete file (to delete a particular photo file)

z Delete all (to delete all the photo files)

15

System Setup

From the main menu, press |<< or >>| to select

“System Setup” and press M to enter and press |<<

or >>| to scroll up and down, you will find the below

settings:

z System Time (adjust the player’s date and time)

Press V to select the year / month / date / hour /

minute / second slot, and press |<< or >>| to

adjust the data.

z LCD set (set the backlight off time from 0 to 50

seconds, set to 0 to keep backlight always on)

z Language (select an OSD language)

z Power Off (to preset player’s auto off time)

“Off time” – the player will automatically power off

after idle by the preset time from 0 to 200 minutes,

set to 0 to turn this function off.

“Sleep time” – the player will automatically power off

by the preset time from 0 to 120 minutes, set to 0 to

turn this function off.

16

z Memory Info (to show the remaining memory)

z Format Device (to format the memory)

**caution: after confirm to format the memory, all

data stored in the memory will be erased.

z Firmware version (show the firmware version of

this player)

z Firmware Upgrade (for after sales service

firmware upgrade use only)

z Pedometer set (please refer to Pedometer

of

this user manual)

17

Technical Specification

Flash Memory Support up to 16GB

microSD card

Audio formats MP3(8 – 320 kbps)

WMA(5-384kbps)

Video formats AMV

Image formats JPEG / BMP / GIF

Battery Built-in Li-Polymer

Interface USB 2.0 High Speed

Display 1.5” TFT Display

Frequency Response 20Hz – 20KHz

S/N ratio >80dB

Earphones Output 10mW

Weight (g) 38.5g

Dimensions 47(W)*85(H)*15(D) mm

18

Trouble Shooting

What should I do if there’s no sound when playing?

You should check the volume first. If the volume has

been turned up, maybe the memory format of the

device is incorrect.

19

Specifications are subject to change without prior notice.

No part of this document may be reproduced or transmitted

in any form or by any mean including photocopying and

recording or translating to another languages for any

purposes without the prior written consent of the

manufacturer.

Page is loading ...

Sunstech Madia User manual

Sunstech Madia User manual

in other languages

Related papers

Other documents