Madia

Sunstech Madia User manual

  • Hello! I am an AI chatbot trained to assist you with the Sunstech Madia User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I turn on the Sunstech Madia?
    How do I insert a MicroSD card?
    What file formats are supported for music?
    How do I convert different video formats to .AMV?
    What file formats are supported for voice recordings?
    How do I save a radio station?
MADIA
English User Manual
1
Inside the box
1 x MADIA player
1 x Earphone
1 x USB cable
1 x CD
1 x English manual
1 x Clip
1 x Armband
2
Content
Button locations and usages
Basic Operation
Power on and off
Pedometer
Text
Music
Video
Driver and Software Utilities Installation
Converting different video format to .AMV
Recorder
Voice
FM Radio
Photo
System
Technical Specification
Trouble Shooting
3
Button locations and usages
(12) 1.5” Color Display
(13) Menu / Select
(14) Previous / Backward
(15) Volume control
(16) Next / Forward
(17) USB port
(18) Earphone jack
(19) Strap hole (strap not included)
(20) Main power switch
(21) Loudspeaker
(22) MicroSD card slot
4
Basic Operation
Power on and off
z To power on the player, slide the main power
switch to “ON”. During standby mode, long
press >|| for 3 seconds to turn on the player.
z To power off the player, slide the main power
switch to “OFF” or long press >|| until the player
is turned off.
Insert and pull out a MicroSD card
With the player powered off,
z Insert the card into the card slot gently with the
card’s gold contacts facing up.
z Pull out the card by slightly pushing it inwards,
the card will bounce by a section, and then you
can pull it out.
Caution: Inserting or pulling out a microSD card
during the player is under operation or is powered on
will cause memory loss or data corrupt or damages
on the microSD card.
5
Pedometer
From main menu, press |<< or >>| to select
“Pedometer” and press M to enter the menu where
you will see:
z Time (press >|| to start counting and press >||
again to stop counting)
z Steps (count the total steps taken during
counting)
z Path L.G. (count the total path length by meter
during counting)
z Energy (count the total calories consumed
during counting).
Pedometer setup
Exit to the main menu, press |<< or >>| to select
“System” and press M to enter. Press |<< or >>| to
select “Pedometer set” and press M to enter the
sub-menu where you will find settings:
z Step size (enter user’s step distance)
z Weight (enter user’s weight)
z Units (select between Metric system and
Imperial system for data entry)
6
Text
Text mode can support .txt document files only.
From main menu, press |<< or >>| to select “Text”
and press M to enter to the list of text files. Press
|<< or >>| to select a desired file and press >|| to
enter.
During text reading, press |<< or >>| to scroll up or
down the page. During text reading, press M to
enter a sub-menu where you will find settings:
z Bookmark select (start reading from a
particular bookmark page)
z Bookmark delete (delete a particular
bookmark)
z Bookmark add (add a bookmark to the current
reading page)
From the list of text files, press M to enter a
sub-menu where you will find settings:
z Card folder (see the list of all text files)
z Playback set (select from manual play or auto
play)
z Delete file (delete a particular text file)
z Delete all (delete all text files)
7
Music
Music mode can support .MP3, and .WMA, audio
files only.
From main menu, press |<< or >>| to select “Music”
and press M to enter to the playing menu. Press |<<
or >>| to select your desired file and press >|| to start
playback; press >|| again to pause.
Volume control - During music playback, press V to
enter volume level bar, press |<< or >>| to adjust the
volume level and press >|| to continue playback.
Sub-menu
(1) In playing menu, during music pause, press M to
enter a sub-menu where you can select or delete
files.
(2) In playing menu, during music playback, press M
to enter a sub-menu where you can
setup:
z Repeat (Normal / Repeat one / Folder / Repeat
Folder / Repeat All / Random / Intro)
z Equalizer (Natural / Rock/ Pop / Classic / Soft /
Jazz / DBB)
8
z Replay mode (Repeat mode for A-B repeat
setting / Repeat times / Replay gap)
HINT: press |<< or >>| to navigate and short press
M to select your choice and long press M to exit to
main menu.
Video
Video mode can support .AMV video files only.
From main menu, press |<< or >>| to select “ Video”
and press M to enter to the playing menu. Press |<<
or >>| to select your desired file and press >|| to start
playback and press again >|| to pause.
During playback, long press |<< for fast backward
and long press >>| for fast forward. Release the
button to return to normal playback speed.
Volume control - During playback, press >|| to pause,
then press V to enter volume level bar. Press |<< or
>>| to adjust the volume level and press >|| to return
to playing menu; press >|| to continue playback.
9
In playing menu, press M to enter a sub-menu where
you can select or delete files or setup repeat mode by
Normal / Repeat one / Folder / Repeat Folder /
Repeat All / Random / Intro.
HINT:
z press |<< or >>| to navigate and short press M
to select your choice and long press M to exit to
main menu.
z This player only supports .AMV video file
format. Other video formats must be
converted to .AMV format by the video
converter provided inside the CD ROM.
Driver and Software Utilities Installation
If you are using Windows¨ 98/98SE, you must install
the driver before you can download any files to your
player.
**If you are using Windows above 98/98SE, you may
skip the following installation procedures.
(4) Insert the CD into the CD ROM drive of your PC.
Double click “Setup.exe” to start the driver
installation.
10
(5) Follow thru the on-screen menu to complete the
installation steps.
(6) Click “Close” once you reach the Installation
Complete screen.
Converting different video format to .AMV video
(6) After installing the driver and software utilities,
click “Start”.
(7) Select All Programs > MP3 Player Utilities >
AMV Convert Tool.
(8) Click “Input File” to select the video file you want
to convert to an .AMV format.
(9) Click “Output File” to set the designated location
to save the converted file.
(10) Click “Convert” to start the converting process.
You will see .AMV video file is being converted
and saved to the designated location once
completed.
11
Note:
The video converter provided in the CD can
convert .DAT, .WMV, .AVI video format into .AMV
format. If the resolution of the video file is less than
160x120, the converter may not be able to convert it
to .AMV format successfully.
Record
Recorder can create .WAV audio files only.
From the main menu, press |<< or >>| to select
“Recorde” and press M to enter to the Recorder
menu. Press >|| to start recording and press again
to pause and press again to continue recording, etc.
When recording is completed, long press >|| and you
will see “Saving” appears then the screen will return
to recorder menu automatically. A .WAV file you
just recorded is stored.
12
Voice
Voice mode can support .WAV audio files only.
To playback the recorded file, go to main menu,
select “Voice” and press M to enter to the Voice
menu.
Press |<< or >>| to select the desired .WAV file.
Press >|| to start playback and press >|| again to
pause.
Volume control - During voice playback, press V to
enter volume level bar, press |<< or >>| to adjust the
volume level and press >|| to continue playback.
Sub-menu
(1) In playing menu, during pause mode, press M to
enter a sub-menu where you can select or delete
files.
(2) In playing menu, during playback, press M to
enter a sub-menu where you can setup:
z Repeat (Normal / Repeat one / Folder / Repeat
Folder / Repeat All / Random / Intro)
z Replay mode (Repeat mode for A-B repeat
setting / Repeat times / Replay gap)
HINT: press |<< or >>| to navigate and short press
M to select your choice and long press M to exit to
main menu.
13
FM Radio
From main menu, press |<< or >>| to select “FM
Radio” and press M to enter the FM frequency bar.
Press |<< or >>| by step to search a radio station
manually, or long press |<< or >>| to auto scan a
radio station.
To adjust volume control, press V to enter volume
level bar, press |<< or >>| to adjust the volume level
and press >|| to exit.
Press M to enter a sub-menu where you will find
settings:
z Save (to store a radio channel)
z FM record (to record a radio signal)
z Delete Channel (to delete a stored radio
channel)
z Delete all (to delete all the stored radio
channels)
z Auto Search (to scan a radio channel)
z Normal Band (to show the frequency bar
between 87.0 and 108.0MHz)
z Japan Band (to show the frequency bar
between 76.0 and 90.0 MHz)
14
Photo
Photo mode can support .JPG, .BMP and .GIF image
files only.
From the main menu, press |<< or >>| to select
“Photo” and press M to enter to the list of photo files.
Press |<< or >>| to select a photo file and press >|| to
view the photo. During photo viewing, press |<< or
>>| to go to the previous or the next photo.
From the list of photo files, press M to enter a
sub-menu where you will find settings:
z Local folder (to the list of all photo files)
z Playback set (Manual Replay / Auto Replay)
z Delete file (to delete a particular photo file)
z Delete all (to delete all the photo files)
15
System Setup
From the main menu, press |<< or >>| to select
“System Setup” and press M to enter and press |<<
or >>| to scroll up and down, you will find the below
settings:
z System Time (adjust the player’s date and time)
Press V to select the year / month / date / hour /
minute / second slot, and press |<< or >>| to
adjust the data.
z LCD set (set the backlight off time from 0 to 50
seconds, set to 0 to keep backlight always on)
z Language (select an OSD language)
z Power Off (to preset player’s auto off time)
“Off time” – the player will automatically power off
after idle by the preset time from 0 to 200 minutes,
set to 0 to turn this function off.
“Sleep time” – the player will automatically power off
by the preset time from 0 to 120 minutes, set to 0 to
turn this function off.
16
z Memory Info (to show the remaining memory)
z Format Device (to format the memory)
**caution: after confirm to format the memory, all
data stored in the memory will be erased.
z Firmware version (show the firmware version of
this player)
z Firmware Upgrade (for after sales service
firmware upgrade use only)
z Pedometer set (please refer to Pedometer
of
this user manual)
17
Technical Specification
Flash Memory Support up to 16GB
microSD card
Audio formats MP3(8 – 320 kbps)
WMA(5-384kbps)
Video formats AMV
Image formats JPEG / BMP / GIF
Battery Built-in Li-Polymer
Interface USB 2.0 High Speed
Display 1.5” TFT Display
Frequency Response 20Hz – 20KHz
S/N ratio >80dB
Earphones Output 10mW
Weight (g) 38.5g
Dimensions 47(W)*85(H)*15(D) mm
18
Trouble Shooting
What should I do if there’s no sound when playing?
You should check the volume first. If the volume has
been turned up, maybe the memory format of the
device is incorrect.
19
Specifications are subject to change without prior notice.
No part of this document may be reproduced or transmitted
in any form or by any mean including photocopying and
recording or translating to another languages for any
purposes without the prior written consent of the
manufacturer.
/