Operating instructions
Quick charge adapter for smartphone
Item no. 1403559
Intended use
Standard USB 2.0/3.0 ports charge smartphones or tablets with up to 500 mA/900 mA. The quick
charge adapter for smartphones allows the computer to supply higher currents without causing
damage and hence for mobile devices to be charged faster.
The product has been especially designed for the quick charge technologies of Apple and
Samsung, but can also be used for charging products of other brands with the dierence that their
quick charge technologies are not supported.
Select dierent modes at the touch of a button for eciently charging your Apple and Samsung
devices.
Always observe the safety and operating instructions of the devices to be
connected to this product.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting, re, electric shock etc. Read
the instructions carefully and keep them for future reference. Make this product available to third
parties only together with its operating instructions.
The product corresponds to the legal, national and European requirements.
All company names and product names are trademarks of their respective owners. All rights
reserved.
Delivery content
• Quick charge adapter for smartphone
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item number
into the search eld. After submitting the query you can download
displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in these operating instructions, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The product is not a toy. Keep away from children.
• Do not leave packaging material lying around carelessly. These may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, vapours and solvents.
• It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Always turn o the connected device before connecting/disconnecting it.
• Never leave the product and the connected device unattended during use.
• Do not cover the product during use.
• Consult an expert when in doubt about operation, safety or connection of the device.Consult a
professional if you require assistance with product operation, safety or connection.
• Maintenance work, adjustments and repairs may be carried out only by a professional or at a
specialist workshop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operating elements
1
2
3
4
1 USB plug
2 Select button
3 Indicator lamp
4 USB port
Operation
• Remove the protective cap from the USB plug (1).
• Switch o the mobile device.
• Connect the charging cable of your mobile device to the USB socket (4) of the adapter.
• Connect the USB plug of the adapter to a USB power supply (min. USB 2.0).
• Select the desired mode by pressing the select button (2) according to the table below and
based on the color of the control light (3):
Control light Suitable for Not suitable for
Blue Apple iPad, iPhone, iPod and
other mobile devices
Samsung Galaxy Tab
Red Samsung Galaxy Tab and other
mobile devices
Apple iPad, iPhone, iPod
-- For data transmission during charging
• The battery of the mobile device will be charged and you can switch the mobile device on again.
• Switch o the mobile device, once its battery has been fully charged.
• Disconnect the adapter from the USB power supply and then disconnect the charging cable
from the mobile device.
• Charging operation is then complete.
Cleaning
• Disconnect the product from the mains supply before cleaning.
• Never submerge the product in water.
• Clean the product with a dry, ber-free cloth.
• Do not use any abrasive or chemical cleaners.
• Install the protective cap when not using the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
You thus full your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply ..................................... 5 V/DC
Charging current ............................... 500 mA to max. 2100 mA, via USB 2.0/3.0
Operating conditions ........................ 0 to +70 ºC, 10 – 85 % RH (non-condensing)
Storage conditions............................-10 to +80 ºC, 5 – 90 % RH (non-condensing)
Dimensions (L x W x H) ....................45 x 19 x 9 mm
Weight .................................................approx. 10 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE. V1_0116_02_JH