Renkforce 2 ports DVI switch bidirectional operation 1920 x 1080 p Owner's manual

Brand: Renkforce

Model: 2 ports DVI switch bidirectional operation 1920 x 1080 p

Category: Coffee making accessories

Type: Owner's manual

Renkforce 2 ports DVI switch bidirectional operation 1920 x 1080 p

With its high resolution support of up to 1920 x 1080 p, the Renkforce 2 ports DVI switch bidirectional operation 1920 x 1080 p allows you to enjoy crystal clear picture and video quality. It is suitable for use with PCs and other devices which are equipped with DVI interfaces. It enables you to switch between two DVI sources, such as a computer and a gaming console, to a single monitor. You can connect two DVI sources and one DVI display or connect one DVI source and two DVI displays.

Renkforce 2 ports DVI switch bidirectional operation 1920 x 1080 p

Page is loading ...

• Never use the product immediately after it has been brought from a cold room into

a warm one. The condensation generated could destroy the product. Allow the

product to reach room temperature before connecting it and putting it to use. This

process may take several hours.

• Consult a technician if you are not sure how to use or connect the product.

• Maintenance, modications and repairs must only be carried out by a technician

or a specialist repair centre.

• If you have any questions that are not answered in these operating instructions,

please contact our technical customer service or other professionals.

Setup

• Turn off all the devices that you wish to connect before connecting any cables.

• The connections can be made as follows:

Connect a computer to two monitors

- Connect a DVI cable from the computer to the DVI connector.

- Connect one DVI cable to each of the DVI 1 and DVI 2 connectors.

- Connect the other ends of each of the DVI cables to the monitors.

Connect two computers to one monitor

- Connect one DVI cable from the computers to each of the DVI 1 and DVI 2 DVI connectors.

- Connect a DVI cable to the DVI connector and the monitor.

The maximum DVI cable length (per DVI connector) must not exceed 1.5 m.

• Power is supplied via the DVI connection.

• Turn on the computer and monitor. The output can only be made on a monitor or from a

computer. Press the Shift key at the top of the switch to switch to either the computer or

monitor to be used.

Care and Cleaning

• Disconnect the repeater from all connected devices before cleaning.

• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may

damage the case or cause the product to malfunction.

• Never submerge the product in water.

• Use a dry, lint-free cloth to clean the product.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the

household waste. At the end of its service life, dispose of the product according to

the relevant statutory regulations.

You thus full your statutory obligations and contribute to environmental protection.

Technical Data

Input voltage/current ..................... 5 V/DC 500 mA

Video input/output ......................... DVI 1 x 2 or 2 x 1 bidirectional

Output resolution .......................... up to 1080p / 60Hz

Frequency ..................................... max. 165 MHz

Operating conditions ..................... -20 to +70 ºC, 0 - 80% RH

Storage conditions ........................ 0 to +70 ºC, 0 - 80% RH

Dimensions (W x H x D) ............... 82 x 17 x 62 mm

Weight .......................................... approx. 105 g

Operating instructions

Bidirectional DVI switch

Item no. 1897810

Intended use

The product is used to switch DVI signals from one or two connected devices that are connected

with the DVI cable. The switch works bidirectionally and can be used to switch between two

inputs to one output or from one input between two outputs. The product supports a resolution

of up to 1080p@60Hz.

This product is intended for indoor use only. Do not use it outdoors. Contact with moisture

(e.g. in a bathroom) must be avoided under all circumstances.

For safety and approval purposes, do not rebuild and/or modify this product. Using the product

for purposes other than those described above may damage the product. In addition, improper

use can cause hazards such as a short circuit or re. Read the instructions carefully and store

them in a safe place. If you pass the product on to a third party, please hand over these

operating instructions as well.

This product complies with statutory, national and European regulations. All company and

Delivery content

• DVI switch

• Operating instructions

Up-to-date operating instructions

Download the up-to-date operating instructions at www.conrad.com/downloads or scan the

QR code shown. Follow the instructions on the website.

Explanation of symbols

This symbol is used to indicate hazards such as electric shocks.

The symbol with an exclamation mark in a triangle is used to highlight important

information in these operating instructions. Always read this information carefully.

The arrow symbol indicates special information and tips on how to use the product.

Safety instructions

Read the operating instructions carefully and observe in particular the safety

instructions. If you do not follow the safety instructions and information on

proper handling in these operating instructions, we assume no liability for any

resulting personal injury or damage to property. Such cases will invalidate the

warranty/guarantee.

• The product is not a toy. Keep out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. It may become a

dangerous plaything for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high

humidity, moisture, ammable gases, vapours and solvents.

• Never expose the product to mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and

protect it from any accidental use. Safe operation can no longer be guaranteed

if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height

may damage the product.

• Always observe the safety instructions and operating instructions of any other

devices which are connected to the product.

• When setting up the product, make sure that the cables are not pinched, kinked

or damaged by sharp edges.

• Always lay the cables so that nobody can trip over or become entangled in them.

This poses a risk of injury.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming or capturing in

electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is

prohibited. This publication reects the technical status at the time of printing.

Page is loading ...

Renkforce 2 ports DVI switch bidirectional operation 1920 x 1080 p Owner's manual

Brand: Renkforce

Model: 2 ports DVI switch bidirectional operation 1920 x 1080 p

Category: Coffee making accessories

Type: Owner's manual

Renkforce 2 ports DVI switch bidirectional operation 1920 x 1080 p

Download PDF

report

Renkforce 2 ports DVI switch bidirectional operation 1920 x 1080 p Owner's manual

Renkforce 2 ports DVI switch bidirectional operation 1920 x 1080 p Owner's manual

in other languages

Related papers

Other documents