Groupe Brandt C2210 Owner's manual

FR GUIDE D'INSTALLATION ET D'UTILISATION

DE BEDIENUNGSANLEITUNG

DA BETJENINGSVEJLEDNING

EN INSTRUCTION FOR USE

NL GEBRUIKSAANWIJZING

Réfrigérateur

Kühlschrank

Køleskab

Refrigerator

Koelkast

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:35 Page 1

Page is loading ...

05

BESKRIVELSE AF APPARATET

(afhængigt af model)

OMBYTNING AF ÅBNING AF LÅGEN

Man kan ændre siden af lågens åbning:

Stikket skal altid være taget ud af apparatet, hvis man vil

ændre siden af lågens åbning.

• Tilt apparatet lidt bagud, og sæt det

fast i denne stilling.

• Skru den øverste tap af, og tag

hængslet af.

• Tag den øverste låge af.

• Skru det midterste hængsel og

beslagene af, og fastgør dem på

modsatte side.

• Montér den øverste låge, tappen og

hængslet på modsatte side

• Skru fryserens nederste tap af, tag

hængslet af, og tag derefter lågen af.

• Montér det hele på modsatte side.

1 / INSTALLATION AF APPARATETDA

Fryseskuffer

Termostat

Dørhylde

Grøntsagsskuffe

Hylde til flasker

A

C

E

D

B

F

A

B

C

D

E

Fryseoversigt

F

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:36 Page 5

06

VEJLEDNING TIL INDBYGNING

Nichens dimensioner

Højde (1) 1.780 mm

Dybde (2) 550 mm

Bredde (3) 560 mm

Af sikkerhedsmæssige årsager skal

der tages højde for ventilation som

angivet på diagrammet på modsatte

side.

Bemærk! Pas på ikke at

spærre for ventilationshullerne.

Desuden skal nichen være udstyret

med en luftledning med følgende

mål:

Dybde 50 mm

Bredde 540 mm

Sæt apparatet i nichen, og tryk det

ind mod bagvæggen og mod den

væg, hvor lågen skal åbnes, indtil

den øverste kappe er lige (1), og det

nederste hængsel er lige med

møblets kant (2).

Fastgør apparatet ved hjælp af de

6 medfølgende skruer.

(I = 4 korte skruer)

(P = 2 lange skruer).

Anbring tætningslisten mellem

apparatet og

møblet.

Anbring kapperne (C-D) i

stoppeknasterne og hængselshullerne.

Montér ventilationsgitteret (B) og

hængselsdækslet i henhold til

model.

(E).

Adskil delene Ha, Hb, Hc, Hd som

angivet i figuren.

Anbring skinnerne (Ha) på den

indvendige side af hver af møblets

låger, og afmærk, hvor de udvendige

huller skal være. Når alle huller er

fritlagte, skal skinnerne fastgøres

med de medfølgende skruer.

Låget (Hc) sættes fast på skinnen

(Ha) med et klik.

DA1 / INSTALLATION AF APPARATET

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:36 Page 6

Page is loading ...

01

Dear Customer,

You have just acquired a BRANDT refrigerator and we would like to thank you.

We have invested all our dedication and know-how in this appliance so that it would best meet your needs. With

innovation and power, we designed it to be always easy to use.

In the BRANDT product line, you will also find a wide range of microwaves, hobs, ventilation hoods, ovens,

dishwashers, washing machines, driers, and freezers, that you can coordinate with your new BRANDT refrigerator.

Of course, in an ongoing effort to satisfy your demands with regard to our products as best as possible, our after-

sales service department is at your disposal and ready to respond to all of your questions and suggestions (contact

information at the end of this booklet).

You can also log on to our web site at www.Brandt.com where you will find information on all our products, as well as

other useful information.

BRANDT

As part of our commitment to constantly improving our products, we reserve the right to make changes to them

based on technical advances to their technical and functional features and appearance.

Attention: Before installing and using your appliance, please carefully read this Installation and Usage Guide,

which will allow you to quickly familiarise yourself with its operation.

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 1

02

ENTABLE OF CONTENTS

• Safety recommendations

__________________________________

04

1 / INSTALLING YOUR APPLIANCE

• Electrical connection

_____________________________________

05

• Before connecting your appliance

___________________________

05

• Protection of the environment

_____________________________

05

• Recycling _______________________________________________ 05

• Description of your appliance ______________________________ 06

• Reversing the opening direction of the door __________________ 06

• Instructions for fitting _____________________________________ 07

2 / USING YOUR APPLIANCE

• Using the refrigeration section

____________________________

09

• Using the freezer section __________________________ 09

• Power safety (according to model)

__________________________

10

3 / MAINTAINING YOUR APPLIANCE

• De-icing

________________________________________________

11

• Cleaning

________________________________________________

11

• Replacing the bulb _______________________________________ 11

4 / SPECIAL MESSAGES, INCIDENTS

• Operating problems

______________________________________

12

5 / AFTER SALES SERVICE

_____________________________________

13

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 2

03

This appliance has been designed for cooling food. Any other use

would be incorrect.

Installation must be according to the instructions in this manual;

poor installation can damage the appliance.

For potential operating problems of the appliance, always contact

only the authorised customer care After Sales Service or qualified

personnel.

For all servicing, first disconnect the apparatus avoiding pulling on

the power cable.

If this refrigerator replaces another, that uses a latch closure,

spring, lock or other, do not forget to destroy the closing

mechanism or, better still, remove the door of your old appliance in

order to prevent anyone from becoming trapped inside it (playing

children, animals, etc).

After unwrapping your appliance, make sure it has not been

damaged. Any damage must be brought to the attention of the

retailer within 24 hours of delivery. The materials used for packaging

are completely recyclable (cardboard, PE pellets, EPS, etc). Keep

these materials out of the hands of children.

For optimal functioning of the appliance, install it far from heat

sources and make sure that air can easily circulate around it (see

appliance installation).

This appliance is not intended to be used by persons (including

children) with impaired physical, sensory or mental abilities, or

persons who have no experience or knowledge, except where they

can use it via the intervention of a person responsible for their

safety, monitoring and their prior instruction in the use of this

appliance.

Children should be supervised to ensure they do not play with the

appliance.

Danger:

The appliance’s refrigeration circuit contains isobutane coolant,

a low-polluting natural gas but nevertheless flammable. During

transport and installation of the appliance, make sure that no

components of the refrigeration circuit are damaged. In case of

damage, leave it away from flames and sources of flames and

thoroughly air the room in which it is placed.

SAFETY RECOMMENDATIONSEN

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 3

04

INST

Attention:

Before proceeding with the installation, read carefully the safety

instructions, in order to avoid certain problems.

Install the appliance in a dry well-aired room, far from any source of

heat.

The climatic classification of your refrigerator is indicated on the

reference plate. It determines the range of ambient temperatures for

which the refrigerator unit is designed, ensuring the appliance

works properly.

Class Ambient temperatures

N 16° to 32°

ST 18° to 38°

T 18° to 43°

ELECTRICAL CONNECTION

Socket characteristics: 220-240V with earth connection.

Avoid using adaptors or extension cords.

Do not let the cable touch the compressor.

Do not let the cable be trapped under the appliance.

The electrical installation of the appliance is supplied with an earth.

For your safety, connect the appliance to a socket supplied with an

effective earth (conforming to current standards for the safety of

electrical installations).

The manufacturer declines all responsibility for any damage that

may be caused by the lack of an earth connection.

BEFORE CONNECTING YOUR APPLIANCE

• Clean the interior of the refrigerator with lukewarm water with

some bicarbonate added. Rinse and dry it carefully.

• Wait 2 hours before turning it on to ensure the stabiliity of

compressor-motor lubrication.

RECYCLING

This appliance’s packing materials are recyclable. Recycle them and

play a role in protecting the environment by depositing them in

municipal containers provided for this purpose.

Your appliance also contains various recyclable materials. It is

therefore marked with this logo to indicate that used appliances

must not be mixed with other waste. Recycling of the appliances

organised by your manufacturer will thus be undertaken in optimum

conditions, in accordance with European directive 2002/96/CE

relating to electrical and electronic equipment waste. Consult your

local authority or your retailer to find the drop-off points for used

appliances that is nearest to your home.

We thank you for your help in protecting the environment.

EN1/ INSTALLING YOUR APPLIANCE

PROTECTION OF THE ENVIRONMENT

This appliance contains no cooling gases harmful to the ozone layer

in its cooling circuit or in its insulation material.

It must not be discarded as normal urban waste

or scrap as this may damage the cooling circuit, especially at the

back of the appliance. Contact your local authority for information

about having this type of appliance collected.

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 4

05

ALLATION

DESCRIPTION OF YOUR APPLIANCE

(depending on model)

1/ INSTALLING YOUR APPLIANCEEN

REVERSING THE OPENING DIRECTION

OF THE DOOR

It is possible to reverse the direction in which the door opens:

The appliance must always be disconnected before

proceeding to change the door direction.

• Lean the appliance back gently and

secure it in this position.

• Unscrew the upper pivot and lift off

the hinge.

• Remove the upper door

• Unscrew the middle hinge and the

brackets and replace them on the

opposite side.

• Replace the upper door, the upper

part of the hinge on the opposite side

• Unscrew the lower pivot of the

freezer door, lift the hinge and remove

the door.

• Replace the whole thing on the

opposite side.

Freezer drawers

Thermostat

Door racks

Vegetable container

Bottle rack

A

C

E

D

B

F

A

B

C

D

E

Freezing guide

F

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 5

06

INSTRUCTIONS FOR FITTING

Size of the space

Height (1) 1,780 mm

Depth (2) 550 mm

Width (3) 560 mm

For safety reasons, ventilation must

be provided as indicated in the

diagram opposite.

Warning: do not obstruct the

ventilation openings.

It is also necessary that the space

has a ventilation opening with the

following measurements:

Depth 50 mm

Width 540 mm

Insert the appliance into the space

against the internal partition,

corresponding to the hinging side of

the door, so the upper cover cap is

just proud (1) and the bottom hinge

is aligned with the partition of the

furniture (2).

Fix the appliance in place with the 6

screws provided for this purpose.

(I = 4 short screws) (P = 2 long

screws)

Insert the compressible gasket

between the appliance and the

furniture.

cabinet

Insert the caps (C-D) on the fin stops

and in the holes of the hinges.

Depending on the model, apply the

ventilation grill (B) and the hinge

cover.

(E).

Separate the parts Ha, Hb, Hc, Hd as

shown in the drawing.

Place the runners (Ha) on the internal

part of the furniture support and

mark the position of the external

holes. After trying out the holes, fix

the runners with the screws

provided.

Click the cover (Hc) onto the runner

(Ha).

EN1/ INSTALLING YOUR APPLIANCE

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 6

07

INSTRUCTIONS FOR FITTING

(continued)

Open the door of the appliance and

of the furniture about 90°. Insert the

bracket (Hb) into the runner (Ha).

Hold appliance and furniture doors

together and mark the position of

the holes as shown in the drawing.

Remove the bracket and make holes

8 mm from the outer edge of the

door using a drill fitted with a 2 mm

drill bit.

Put the bracket back on the runner

and fix it with the 8 screws provided.

Use the set of oval holes to align the

door of the furniture if necessary.

At the end, it is necessary to check

that the door of the appliance can

shut perfectly.

Click the cover (Hd) onto the runner

(Hb).

If the appliance is fixed laterally to

the furniture column, unscrew the

screws of the brackets (D) and move

them as in the drawing.

Fix them again. Put on the cover (E).

1/ INSTALLING YOUR APPLIANCEEN

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 7

08

EN2 / USING YOUR APPLIANCE

USING THE REFRIGERATOR SECTION

The thermostat located in the refrigerator regulates the temperature

in the 2 spaces. To adjust it, turn the knob at the right side of the

casing. In position 0, the appliance is off. It is advisable to select a

middle position: 2 or 3.

Tips:

• Do not put hot foods or uncovered liquid in the refrigerator.

• NEVER put volatile or flammable or explosive liquids such as

solvents, alcohol, acetone or fuel. They could explode.

• It is advisable to wrap meat and fish to prevent odours.

• Leave enough space between the foods to allow air to circulate

freely between them. Similarly, when arranging them, avoid placing

them in contact with each other.

• Do not let food come into contact with the cold partition at the

bottom of the refrigerator.. The racks have stops for that reason.

• The door must not be left open longer than necessary.

This compartment allows deep-frozen food to be kept, fresh

produce to be frozen and ice cubes to be made.

Do not freeze too large a quantity of food all at once, the more

quickly the food can be frozen, the longer it will keep properly.

Similarly, wrap your food well before freezing, to conserve all its

flavour and so it does not affect other products.

The length of time that food can be kept frozen or deep-frozen

depends on the type of food. See the instructions on the packaging

of the food. Do not put bottles or cans in the freezer compartment.

They can burst when frozen. Highly carbonated drinks can also

explode! NEVER freeze lemonade, fruit juice, beer, wine,

champagne, etc, in the freezer compartment.

USING THE FREEZER SECTION

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 8

09

FOOD SAFETY (according to model)

Explanatory diagram for the coldest part.

The symbol opposite shows the location of the coldest

zone of your refrigerator, where the temperature is + 4°C.

You can place meat there, fowl, fish, cold cooked meats, prepared

food, salads, egg and cream based foods and pastries, fresh paté,

pastries, pizzas/quiches, fresh products and raw milk cheese,

ready to eat vegetables sold in plastic wrapping and generally all

fresh products whose use by date suits a templerature of + 4°C.

T

emper

ature indicat

or:

Adjust your thermostat

Correct temperature

The temperature indicator allows you to control the proper

functioning of your refrigerator.

The indicator displays “OK” when the coldest zone reaches an

average temperature of ± 4°C (4 hours after being

turned on). If the temperature exceeds + 4°C, the indicator remains

black. The user must therefore lower the temperature of the

refrigerator by adjusting the thermostat.

Conservation of frozen or deep-frozen food.

Milk products, cheese

Meat, cold cooked meat, fish

Fruit and vegetables

Butter and eggs

Condiments

Drinks

EN 2 / USING YOUR APPLIANCE

OK

Warning:

Keeping the refrigerator door open for a long time produces a

termperature rise inside. In order to measure the temperature

properly, the indicator should be read within 30 seconds.

Similarly, it is useful to consider that the temperature is not

totally uniform throughout the appliance, which is why there are

different zones suitable for each type of food.

AA

BB

CC

DD

FF

EE

GG

The coldest zone

AA

BB

CC

DD

EE

FF

GG

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 9

10

DE-ICING

Your refrigerator has an automatic de-icing system. The rear

face of the appliance covers itself with ice when the compressor

is working and de-ices when the compressor is off. When the ice

melts, the water evaporates by itself.

The freezer compartment must always be de-iced when

the ice layer has reached a thickness of approximately 4mm.

In any case, this compartment must be de-iced at least once a

year.

To de-ice it, you can use a scraper or any plastic utensil but ne

ver

an metal instrument or an electric appliance.

Disconnect your refrigerator before proceeding to

de-ice it.

• Wrap your frozen food in a freezer bag and keep it cool.

• Leave the door open and sponge the melting water as

necessary.

•To speed up de-icing, you can place a container of hot water in

the compartment and shut the door.

• Once the de-icing has finished, clean your appliance.

CLEANING AND MAINTENANCE

Disconnect your refrigerator before cleaning it.

We recommend that you clean and disinfect your appliance it

regularly.

• Clean the inside with water and bicarbonate with a sponge or

dishcloth to avoid the formation of unpleasant odours.

• Never use a solvent or an abrasive detergent, as it can damage

the inside of your refrigerator. Do not put any accessories into a

dishwasher.

• It is advisable to wipe the back of the appliance with a cloth once

a year, as the efficiency of the refrigerator drops and power

consumption increases when it is dirty.

REPLACING THE BULB

Disconnect your refrigerator before changing the bulb.

• The bulb is behind the thermostat panel. Pull back the grill.

• Rmove the bulb by unscrewing it counterclockwise.

• Replace it with a new bulb of the same wattage.

• Replace the grill, reconnect the appliance and turn it back on.

3 / MAINTAINING YOUR APPLIANCE EN

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 10

11

OPERATING PROBLEMS

The refrigerator makes some entirely normal sounds:

• The cooling gas can produce a bubbling when circulating in the cooling circuit.

• The compressor can produce a hum which can be louder at startup.

• A “crack” is produced by the expansion and contraction of the materials used.

TECHNICAL HELP DEPARTMENT

If you have already made the indicated checks and your problem persists, DO NOT DO ANY REPAIRS YOURSELF. Contact the nearest

Technical Help Department.

PROBLEM SOLUTION

The appliance does not start.

Check that the power lead is properly connected, that the fuse

has not blown and that the circuit-breaker has not tripped.

The refrigerator vibrates or makes noise Check that it is properly level. Adjust the feet.

The refrigerator cools too much / not enough

Check the position of the thermostat and adjust it to a better

temperature.

The refrigerator bulb does not light up

Check the bulb and change it if necessary. If the problem persists,

check that your appliance is properly connected to the power.

The compressor does not restart after a change of termperature.

This is normal, the compressor restarts after a certain length of

time.

There is water at the bottom of the racks.

The hole allowing the de-icing water to drain must be blocked.

Unblock it with a knitting needle.

EN 4 / SPECIAL MESSAGES, INCIDENTS

THIS APPLIANCE CONFORMS TO THE EEC DIRECTIVES

73/23, 93/68, 89/336, 96/57, 92/31, 94/62

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 11

12

Any repairs that are made to your appliance must be handled by a qualified professional authorised to work on the brand.

When you call, mention your appliance’s complete reference (model, type, serial number). This information is on your guarantee

certificate and on the reference plate.

GENUINE REPLACEMENT PARTS: During maintenance work, request t

he exclusiv

e use of

certif

ied genuine replacement parts.

To preserve your appliance, we recommend that you use Clearit cleaning products.

Clearit offers you professional products and solutions designed for the daily care of your household appliances and kitchens.

They are on sale at your regular retailer, along with a complete line of accessories and consumable products.

EN5 / AFTER-SALES SERVICE

Professional expertise

working for you at home

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 12

Page is loading ...

02

NLINHOUD

• Veiligheidsaanwijzingen

___________________________________

03

1 / INSTALLATIE VAN HET APPARAAT

• Electrische aansluiting

____________________________________

04

• Voor u uw apparaat inschakelt

______________________________

04

• Mileubescherming

________________________________________

04

• Recyclage

______________________________________________

04

• Beschrijving van het apparaat

______________________________

05

• Inversie van de deurenopening

_____________________________

05

• Aanwijzingen voor de installatie

_____________________________

06

2 / GEBRUIK VAN HET APPARAAT

• Gebruik van het koelkast

__________________________________

08

• Gebruik van het vriesvak

____________________________

08

• Voedingsveiligheid (volgens model)

_________________________

09

3 / PERIODIEK ONDERHOUD VAN HET APPARAAT

• Ontvriezen

______________________________________________

10

• Reiniging

_______________________________________________

10

• De lamp vervangen

_______________________________________

10

4 / SPECIALE MEDEDELINGEN, INCIDENTEN

• Gebruiksproblemen

_______________________________________

11

5 / SERVICEDIENST

____________________________________________

12

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 2

Page is loading ...

05

BESCHRIJVING VAN HET APPARAAT

(naar gelang model)

INVERSIE VAN DE DEURENOPENING

Het is mogelijk de opening van de deur om te draaien:

Het apparaat moet steeds uitgeschakeld zijn voor u kan

overgaan tot het omdraaien van de deuropening.

• Klink het apparaat naar achter en

blokkeer het in deze positie.

• Schroef het bovenste scharnier los

en verwijder het.

• Maak de bovenste deur vrij.

• Verwijder het tussen scharnier en

de ellebogen los en schroef ze aan de

andere zijde vast.

• Bevestig de bovendeur, de

bovenste spil en het scharnier aan de

andere zijde.

• De onderste spil van het vriesvak

losschroeven, het scharnier

verwijderen en de deur vrijmaken.

• Alles aan de andere zijde

hermonteren.

1 / INSTALLATIE VAN HET APPARAATNL

Vriesvak laden

Thermostaat

Deurvak

Groentenbak

Deurvak flessen

A

C

E

D

B

F

A

B

C

D

E

Handleiding voor het ontdooien

F

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 5

06

AANWIJZINGEN VOOR DE INSTALLATIE

Afmetingen van de nis

Hoogte (1) 1.780 mm

Diepte (2) 550 mm

Breedte (3) 560 mm

Voor veiligheidsredenen moet de

ventilatie voorzien worden als

hiernaast geillustreerd.

Let op: zorg ervoor de ventila-

tieopeningen niet te versperren.

Het is eveneens noodzakelijk dat de

nis voorzien is van een

verluchtingsbuis met de volgende

afmetingen:

Diepte 50 mm

Breedte 540 mm

Plaats het apparaat in de nis door het

tegen de binnenste wand te plaatsen,

overeenstemmend met de

openingszijde van de deur, tot de

bovenste wand juist zit (1) en zorg

ervoor dat het onderste scharnier

afgelijnd is met de wand van het

meubel (2).

Bevestig het apparaat met de

6 bijgeleverde schroeven.

(I = 4 korte schroeven)

(P = 2 lange schroeven)

Bevestig de drukverbinding tussen

het apparaat en het meubel.

.

Bevestig de stoppers (C-D) op de

schoepen van de aanslagen en in de

openingen van de scharnieren.

Volgens het model, installeer de

verluchtingsrooster (B) en de

scharnierbedekking (E).

Scheid de stukken Ha, Hb, Hc, Hd

zoals aangegeven in de illustratie.

Plaats de geleiders (Ha) in het

binnenste gedeelte van elke deur van

het meubel en markeer de positie van

de buitenopeningen. Na de

openingen aangebracht te hebben,

bevestig de geleiders met de

bijgeleverde schroeven.

Klik het deksel (Hc) op de geleider

(Ha).

NL1 / INSTALLATIE VAN HET APPARAAT

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:37 Page 6

Page is loading ...

11

GEBRUIKSPROBLEMEN

Sommige geluiden zijn volledig normaal in een koelkast:

• Het koelingsgas kan een borrelend geluid maken bij het rondgaan in het systeem

• De compressor kan meer ‘snorren’ bij het opstarten

• De “krak” door de uitzetting en contractie van de gebruikte materialen

TECHNISCHE HULPDIENST

Als u de bovenstaande controles uitgevoerd hebt en het probleem blijft bestaan, VOER ZELF GEEN ENKELE HERSTELLING UIT Neem

contact op met de dichstbijzijnde Technische Hulpdienst.

PROBLEEM OPLOSSING

Het apparaat werkt niet.

Kijk na dat de stekker goed aangesloten is, dat de zekering niet

gesmolten is of de stroomonderbreker niet gesprongen is.

De koelkast trilt of maakt lawaai. Kijk na dat ze waterpas geplaatst is. Regel de voeten

De koelkast wordt te/ onvoldoende koud. Kijk de positie van het thermostaat na en stel de temperatuur bij .

De lamp van de koelkast gaat niet aan.

Kijk de lamp na en vervang ze indien nodig. Als het probleem blijft

bestaan, kijk na of uw apparaat goed aangesloten is

De compressor start niet na een temperatuurswijziging Dit is normaal, de compressor start na enige tijd

Er is water op de bodem of de rekken

De opening voor het verwijderen van water na ontvriezen is

waarschijnlijk verstopt. Ontstop ze met een breinaald.

NL 4 / SPECIALE MEDEDELINGEN, INCIDENTEN

DIT APPARAAT IS IN OVEREENKOMST MET DE EEC RICHTLIJNEN

73/23, 93/68, 89/336, 96/57, 92/31, 94/62

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:38 Page 11

Page is loading ...

KL- COMBI BUILT IN BRANDT - 01/07

Combi_FR_DE_DK_EN_NL V5.qxd 16/01/2007 18:38 Page 13

Groupe Brandt C2210 Owner's manual

This manual is also suitable for

Groupe Brandt C2210 Owner's manual

in other languages

Related papers

Other documents