Electrolux EUC31300S User manual

Page is loading ...

We were thinking of you

when we made this product

3

Welcome to the world of Electrolux

Thank you for choosing a first class product from Electrolux, which hopefully will

provide you with lots of pleasure in the future. The Electrolux ambition is to offer

a wide variety of quality products that make your life more comfortable. You find

some examples on the cover in this manual. Please take a few minutes to study

this manual so that you can take advantage of the benefits of your new machine.

We promise that it will provide a superior User Experience delivering

Ease-of-Mind. Good luck!

4

The following symbols are u sed in this manual:

Important information concer n i n g your personal safety and

information on h ow to avoid damaging the appliance

General information and tips

Environmental information

Scrapping old appliances

T

he symbol on the product or on its packaging indicates that this product

may not be treated as household waste. Instead it should be taken to the

appropriate collection point for the recyclin g of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the en vironment an d h u man

health, which could otherwise be caused by inappropriate waste handling of

this product. F or more detailed information about recycling of this product,

please contact your local council, your household waste disposal service or the

shop wher e you purchased the product.

5

Safety instructions

Your new freezer may have other

functions compared to your previous

one.

This appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they h ave been

given supervision or instruction

concerning use of the appliance by a

person responsible for their safety.

Carefully read these instructions

to

learn h ow the appliance works

and

how to care for it. Keep the

instruction

booklet. It will come in han dy if

you

later sell the cabinet or give it

to

somebody else.

These warnings are provided in the

interests of your safety. Ensure that

you understand them all before

installing or using the appliance. Your

safety is of paramount importan ce. If

you are unsure about any of the

meanings or warnin gs contact the

Customer Care Department.

For the User

· The cabinet is intended for keeping

foodstuff in a normal household as

explained in this instruction booklet.

· Do not keep explosive gases or

liquids in the refrigerator or freezer

compartment. They may e xplode and

cause injury and material damage.

· Do not let sharp objects come into

contact with the refrigerating system

on the back of and inside the cabinet.

If the refrigerating system is punctured,

the cabinet will be damaged and

foodstuff inside may spoil.

· Do not keep carbonised drinks or

bottles in the freezer compartment.

The glass bottles may break.

· The cabinet is heavy. The edges

and projecting parts of the cabinet

may be sharp. Be careful when moving

the cabinet and always use gloves.

Child Safety

· Pay attention so that small children

do not gain access to the operating

controls or the inside of the cabinet.

WARNING

Keep ventilation openings, in the

appliance enclosure or in the built-in

structure, clear of obstruction.

WARNING

Do not use mechan ical devices or

other means to accelerate the

defrosting process, other than those

recommended by the manufacturer.

WARNING

Do not damage the refrigerant circuit.

WARNING

Do not use electrical appliance inside

the food storage compartments of the

appliance, unless they are of the type

recommended by the manufacturer.

6

Contents

Scrapping old cabinets 4...........

Safety instructions 5............

USE 7...........................

Before use 7......................

Control Panel 7...................

DISPLAY 7.......................

Select /Switch off /Switch on 8......

Functions Menu 8.................

Temperature selection 8............

Switchin g off 8....................

Ambient Temperature Function 9.....

Child lock Function 9..............

Eco mode Function 9..............

Freezing fresh food 9...............

Drink Chill Function 10.............

Use of the freezer compartment 10...

Storage of frozen food 10...........

Excessive temperature a larm 11.....

Door open acoustic alarm 11........

Cabinet interior 11.................

HINT and TIPS 12.................

Saving energy 12..................

Food Storage 12..................

Protect the environment 12.........

MAINTENANCE and CLEANING 13..

Removing the ventilation grille 13....

Cleaning 13......................

Defrosting the freezer 13............

To change the lamp 14.............

When the appliance is not in use 14..

SOMETHING NOT WORKING 15....

TECHNICAL SPECIFICATION 17....

INSTALLATION 18.................

Electrical cord 18..................

Unpacking 18.....................

Electrical connection 18............

Remove the transport supports 18...

Cleaning 18......................

Installing the cabinet 18............

Door Reversal 20..................

7

USE

BEFORE USE

Position and clean the cabinet as

explained in the section "Installation".

Before inserting the power plug into the outlet and switching on the cabinet for

the first time, leave it standing upright for about 4 hours. Otherwise the

compressor may sustain damage. This time will allow the oil sufficient time to

return to the compressor.

Control Panel

AE

D

C

B

A - Appliance button ON/OFF

B - Temperature regulation button

C - Temperature and function indicator

D - Function button

E - Confirmation button

DISPLAY

Excessive temperature alarm and

Door open acoustic alarm

Indicator (if foreseen)

If on the temperature indicated is

the ambient temperature

Positive

T

emperature indicator

Negative

T

emperature indicator

Temperature indicator

If on the Child Lock function is on

If on the timer function is on

If on the Chill mode function is on

If on the

A

ction Freeze function

is on

If on the Eco Mode function is on

8

Select /Switch off /Switch on

First switch on

After plugging the plug into the power

outlet, if the display is not illuminated,

press key (A), appliance on.

As soon as the appliance is turned on,

it is in alarm condition, the temperature

flashes and you will hear a buzzer.

Press key (E) and the buzzer will go off

(also see the section on "excessive

temperature a larm") the icon

still

flashes and on the indicator

will appear the warmest temperature

reached.

For a correct storage of the food select

the Eco mode function that guarantee

the following temperature is set:

-18°C in the freezer

· Wait until the inside compartment

temperature reach -18°C, before intro-

ducing the goods in the freezer com-

partment.

· To select a different temperature

see "Temperature regu lation".

Functions Menu

By activating the key D the fu n ctions

menu is operating. Each function

could be confirmed by pressing button

E. If there is n o confirmation after

some seconds the display will go out

from the menu and return in normal

condition.

The following functions are indicated:

Ambient Temperature

Child Lock function

Eco Mode function

Action Freeze function

Drinks Chill fu nction

Temperature regulation

The temperature may be regulated by

pressing the key (B) to set the desired

temperature.

By pressing the key B the current tem-

perature setting flashes on the indica-

tor and by pressing the key B again it

is possible to change it.

Youconfirmthechoiceofthetempe-

rature either by pressing the key E,

(you will hear the buzzer) or by waiting

for some seconds (you will not hear

the buzzer).

Then the indicator shows the inside

compartment temperature again.

The newly selected-temperature must

be reached after 24 hours.

It is not necessary to set the tempera-

ture again after long periods of non

use as the temperatu re remains

stor ed.

Attention!

During the stability period by the first

starting the temperatu re displayed can

not correspond to the setting tempe-

rature. During this time it is possible

that the temperature displayed is

differen t than the setting temperature.

Switching off

The appliance is shut off by pressing

key (A) for more than 1 second. After

this, a countdown of the temperature

from -3 -2 -1 will be shown.

9

Ambient Temperature Function

The ambient temperature function is

activated by pressing key D (several

times if necessary) until the corres-

ponding icon appears

.

In this condition the selected tempera-

ture is the ambient temperature.

You must confirm the choice by

pr essing key E within few seconds.

You will hear the buzzer and the icon

remains lighted.

It is possib le to de-activat e the function

atanytimebypressingkeyDuntilthe

correspo nding icon will flash and then

key E.

Child Lock Function

The child lock function is activ at ed by

pr es sing key D (sever al times if

neces s a r y) unt il the cor resp onding icon

appears

.

You must co nfi r m the choi ce by pres-

sing key E within few seconds . You will

hear t he buz z er and the icon r emains

light ed.

In this condition any possible operation

through the keys does not cause an y

change as long as this function is

activated.

It is possible to de-activate the fu n ction

atanytimebypressingkeyDuntilthe

corresponding icon flashes and then

key E.

Eco mode Function

The Eco mode function is activated by

pressing key D (several times if neces-

sary) until the corresponding icon

appears

. You must confirm the

choice by pressing key E within few

seconds. You will hear the buzzer and

the icon remain s lighted.

In this condition the ch osen tempera-

tures are automatically set (- 18°C), in

the best conditions for storing food.

It is possible to de-activate the fu n ction

at any time by changing the selected

temperature in one of the compart-

ments.

Freezing fresh food

The freezer compartment is suitable for

long term storage of commercially

frozen and deep-frozen food, and for

freezing fresh food.

The maximum quantity of foods to

freezein24hoursisshownonthe

serial number plate.

To freeze the amount of food indicated

on the serial number plate, place the

food directly in touch with the cooling

surface (remove the drawer or basket).

In case the food is frozen inside the

drawers or baskets, the maximu m

quantity is slightly reduced.

Place the food to be frozen in the

compar t ment, as this is the coldest

point . To fr eez e fres h foods, you will

need t o activat e the fast fr eez e

function. Press key D (several times if

neces s a r y) unt il the cor resp onding icon

appears

You must co nfi r m the choi ce by pres-

sing key E within few seconds . You will

hear the buzz er and on the disp lay will

appear some animation wit h lines.

Aft er a pre-cooling period of 24 hours,

place the food s in the freezer.

The freezing process takes 24 hours.

During this period do not put other

foods in the freezer.

10

This function stops automatically after

52 hours.

It is possible to de-activate the fu n ction

atanytimebypressingkeyDuntilthe

corresponding icon flashes and then

key E.

Drinks Chill Function

The Drinks Chill function is to be used

as a safety warning when placing

bottles in the freezer compartment. It is

activated by pressing key D (several

times if necessary) until the correspon-

ding icon appears

.

You must confirm the choice by pres-

sing key E within a few seconds.You

will hear the buzzer and the icon

remain lit.

In this condition it operates a timer

with a default value of 30 min and it

could change from 1 to 90 min, by

pressing key B you select the minutes

needed.

At the end of the selected time ther e

ar e the follo wing indicatio ns:

- on the indicato r

the symbol

flas hi ng

;

-theicon

flas hi ng ;

-theicon

flas hi ng ;

- sounding of an aco ustic alarm until

key E is pressed. At this point bare in

mind to remove the drinks contained in

the freezer compartment.

It is possible to de-activate the fu n ction

atanytimebypressingkeyDuntilthe

corresponding icon will flash and then

key E.

Use of the freezer compartm ent

The freezer is provided with the symbol

whichmeansthatitis

suitable for freezin g fresh food and for

long term storage of frozen and

deep-frozen food.

The temperature may be regulated

between -15°C and -24°C.

We suggest setting the internal tem-

perature of approximately -18°C,

which guarantees proper freezin g and

conservation of the frozen foods.

Attention!

During the stability period by the first

starting the temperature displayed can

not correspond to the setting tempe-

rature. During this time it is possible

that the temperature displayed is

different than the setting temperature.

Attention!

Difference between the temperature

displayed and temperature setting is

normal. Especially when :

- a new setting has recently been

selected

- the door has been left open for a

long time

- warm food has been placed in the

compartment.

Difference until 5°C inside the

compartment are quite normal.

During normal functioning the indicator

shows the warmest temperature inside

the compartment.

Storage of frozen food

When first starting-up or after a period

out of use, before putting the pr oducts

in the compartment let the appliance

run at least 12 hours. To obtain the

best performance from this appliance,

you should: if large quantities of food

aretobestored,removealldrawers

and baskets from appliance and place

food on cooling shelves.

11

Pay careful attention not to exceed

load limit stated on the side of the

upper section

(where applicable).

Important

In the event of accidental defrosting,

for example due to a power failu re, if

the power has been off for longer that

the value shown in the technical

characteristics chart un der "rising

time", the defrosted food must be

consumed quickly or cooked

immediately and then refrozen (after

cooling).

Excessive temperature alarm

An increase in the temperature in the

freezer compartment (for example due

to an power failu re) is indicated by:

- flashing temperature;

- flashing of the icon

;

- sounding of buzzer.

When normal conditions are restored:

- the acoustic signal shuts off;

- the temperature value continues to

flash;

When you press key "E" to de-activate

the alarm, the highest temperature

reached in the compartment appears

on indicator for some seconds. Then it

returns on the normal operation

showing the temperature of the

selected compartmen t.

During the alarm phase, the buzzer

can be switched off by pressing key E.

Door open acoustic alarm

An acoustic alarm will sound when the

door is left open for around 1,5 minutes

The door open alarm conditions are

indicated by:

- flashing of the icon

;

- sounding of buzzer.

Press the key (E) to stop the acoustic

alarm.

When norm al conditions ar e res t ored

(door closed):

- the acoustic alarm will sto p.

Cabinet interior

Freezer drawers

The freezer drawers ensure that it i s

quick and easy to find the food

package you want. To gain space, the

drawers can be removed and the

products can be put directly on the

shelves. On all shelves, except the top

shelf, it is possible to place products

that protrude 20 mm from the front

edge. This allows maximum use of the

available space.

Do not remove the bottom drawer. It is

required to assure proper air

circu lation.

Ice cubes

Fill the ice tray to max. 3/4 since water

expands as it freezes. Release the ice

cubes by twisting the ice tray.

If ice cubes are kept for a l ong time,

they will dry out and the taste is

affected. Thus, throw away old ice

cubes and prepare new ones when

needed.

12

HINT and TIPS

Saving energy

· Pay careful atten tion to where the

cabinet is placed. See the section

"Installation". When installed correctly,

the cabinet will consume less en ergy.

· Try to avoid keeping the door open

for long periods, or opening the door

too frequently as warm air will enter the

cabinet, and cause the compressor to

switch on unnecessarily often.

· Ensure there are no obstructions

preventing the door from closing

properly.

· Thaw fr ozen food in the fridge. This

will ensure safer defr osting of foods

and reduce the work of the

refrigeration unit

· It is advisable to periodically clean the

refrigeration system at the back of the

appliance with a duster or vacuum

cleaner.

· Food which is to be frozen (when

cool) should be placed in the fridge

before being transfered to the freezer.

· Avoid unnecessary frosting in the

cabinet by packing all foodstuffs into

airtight packages before placing them

in the freezer.

· Carefully follow the advice on freezing

products in the section " Using the

freezer". This will prevent wasting

energy.

· Do not set the temperature too low in

the freezer. A suitable temperatu re is in

the range of -18°C to -20°C .

· Defrost the freezer when the frost

layer reaches a thickness of 3-5 mm.

· Make sure the door gasket is

complete and always clean.

Food Storage

· To obtain the best results fr om your

appliance, neither h ot foods nor liquids

which may evaporate, should be

placed in the larder compartment.

· Avoid buying frozen food if you can

not store it straight away. The use of

an insulated container is advisable.

When you arrive home place the

frozen food in the freezer immediately.

· Ensure that food placed in the freezer

is dated and labelled and used in date

order to ensure that food is consumed

at its best. Remove suspect food from

you appliance and clean, refer to

cleaning and maintenance.

Protect the environment

· Hand over the cabinet packaging

and discarded fridges and freezers to a

recycling station. Contact your local

council or En viron mental Health office

for more information.

· Keep foodstuff in re-u sable

containers. Cut down on disposable

material as mu ch as possible.

· When cleanin g the cabinet, use a

mild washing-up detergent.

· Follow the advice in the section

"Saving energy"

· The door gasket and coolant used in

this cabinet will not harm the ozon e

layer.

· All parts in the packaging can be

recycled.

· The cabinet has been designed for

easy dismantling and subsequent

recycling.

13

MAINTENANCE and

CLEANING

Removing the ventilation grille

The ventilation grille can be removed,

e.g. to wash the grille.

Make sure the door is open when

removing the ventilation grille. Unsnap

the upper edge of the grille by pulling

outward/downward. Then pull the grille

straight out to completely remove it.

Cleaning

Clean the cabinet at regular intervals.

Disconnect the appliance from

electricity supply.

Internal Cleanin g

Clean the inside and accessories with

warm water and bicarbonate of soda

(5ml to 0,5 litre water) Rinse and dry

thoroughly.

Regularly check the door seals and

wipe clean to ensure they are clean

and free from debris.

External Cleanin g

Use water/neutral soap emulsion for

cleaning the surface of stainless steel,

anti-finger-print coated. Do NOT use

abrasive paste.

Remove the ventilation grille (see the

section "Removing the ventilation

grille") and vacuum-clean under the

cabinet. Once or twice a year dust the

condenser (black grille) and the

compressor at the back of the

appliance, with a brush or vacuum

cleaner, as an accu mu lation of dust

will affect the performance of the

appliance and cause excessive

electricity consumption.

When moving the cabinet, lift it by the

front edge to avoid scratching the floor.

Defrosting the freezer

A certain amount of frost will always

form on the freezer shelves and around

the top compartment. Defrost the

freezer when the frost layer reach es a

thickness of about 3-5 mm.

Remove the freezer drawers and place

them on top of each oth er by turning

every oth er drawer one h alf turn . Put

insulating material around the drawers,

e.g. blankets or newspapers.

The frozen products can also be

packed closely together and be kept in

a cold location, e.g. in the fridge.

14

Defrosting can be accelerated by

placing bowls with hot water (not

boiling) inside the freezer.

Loosen the drainage channel from its

resting position and push in according

to the illustration and place it in the

bottom freezer drawer where water

can collect.

Carefully scrape off the ice when it

starts to thaw. Use a wood or plastic

scraper. Do not use sharp objects as

these may damage the interior.

When all the ice has melted, clean and

wipe the cabinet dry, then put the

drainage chann el back in place.

Switch on the cabinet and replace the

frozen foodstuff.

Never use a hair drier or other h eating

appliances to speed up defrosting.

Excessive heat may damage the

plastic interior, and humidity could

enter the electric appliance making it

live.

To change the lamp

The light is switched on automatically

when the door is opened. Before

replacing the light bulb, discon n ect the

power plug from the outlet.

Disassemble the lamp by using a

screwdriver in the recess on the lamp

insert. To prise it out of its location.

Assemble a n ew lamp by guiding it

into a cen tred position and press un til

it snaps into place.

Use a halogen bulb of the same type,

maximum rating of 20 W.

When the appliance is not in u se

Disconnect the appliance from

electricity supply.

Empty all foods and clean the

appliance, leaving the doors ajar to

prevent unpleasant smells.

If the cabinet is to be kept on, ask

somebody to check it once in a while

to prevent the food inside from spoiling

in case of a power failure.

15

SOMETHING NOT WORKING

Before contacting your local Service Force Centre check the following point:

Problem Possible cause / Remedy

"" is displayed in the

temperature display.

An error has occurred in measuring the

temperature. C all you r service representative.

(The cooling system will continue to keep

food products cold, but temperature

adjustment will n ot be possible.)

Audible alarm + flashing red

warning symbol. (It is too warm

inside the freezer.)

Switch off the audible alarm by pressing the

alarm off button.

The audible alarm could have been triggered

by:

The cabinet h aving been recently switched

on and the temperature still being too h i gh.

See the chapter "Switching on and setting

the temperature".

The door may have been open for so long

that the `door open' alarm was triggered.

It is too warm inside the

freezer.

Set a lower temperature.

Make sure that the door is completely closed

and that the insulating strip is complete and

clean.

If warm food products have been put inside

the freezer, wait for a couple of hours and

then check the temperature again.

Distribute the food products to allow cold air

to circulate around them.

It is too cold inside the freezer.

Set a warmer temperature.

Fast F reeze could have been switched on.

The temperature display shows the highest

temperature in side the cabinet. Thus a

differen ce between the temperature indicated

on the display and the (average) temperature

measured in another way is normal.

16

It is too cold inside the freezer.

Set a warmer temperature.

Fast F reeze could have been switched on.

The temperature display shows the highest

temperature in side the cabinet. Thus a

differen ce between the temperature indicated

on the display and the (average) temperature

measured in another way is normal.

Too much frost and ice are

produced.

Make sure that the door is completely closed

and that the insulating strip is complete and

clean.

The cabinet does not operate

at all. Coolin g or interior light

does not operate. No indicator

lamps light.

The cabinet is not switched on.

Power does not reach the cabinet. (Try

connecting another electrical device to the

power outlet.)

Thefusehasblown.

The power plug is not properly connected.

The compressor operates

continuously.

Set a warmer temperature.

Make sure that the door is completely closed

and that the insulating strip is complete and

clean.

The temperature where the cabinet is placed

is above normal room temperature.

Power failure Do not unn ecessarily open the cabinet,

except when the power cu t seems to be

long, in which case the food products should

be moved to another cabinet that works. If

the frozen products are still hard following the

power cut, they may be immediately refrozen.

If the food products have thawed but are still

fresh, they may be used, however they

should be prepared before re-freezing or

eating them.

17

Sound level in cabinet is too

high.

The refrigerating system will always produce

some sounds. A pulsing sound is heard when

coolant is pumped inside the cooling pipes.

A ticking sound from the thermostat can be

heard when the compressor switches on and

off. The sound level varies depending on the

operation of the cabinet.

If you feel the sound level is incorrect:

Make sure the pipes at the back of the

cabinet do not tou ch each other. C arefully

bend them if they do.

If the cu shion spacers (between the cabinet

wall and pipes) come loose, put them back in

place again.

Carefully follow the in struction s in the chapter

"Installing the cabinet".

TECHNICAL SPECIFICATION

Model

EUC31000X/S

Net capacity Freezer l

268

Energy consumption kWh/y

287

Freezing capacity kg/24 h

24

Rising time h 10

Dimension mm

Height

1800

Width

595

Depth

623

18

INSTALLATION

Electrical cord

Do not remove the power cord by

pulling on its lead, particulary when the

product is being pulled out of its niche.

· Damage to the cord may cause a

short-circu it, fire an d/or electric shock.

· In the event of damage to the

appliance's main cable, only an

authorised service company

recommended by the manufacturer or

a similarly qualified person may adjust

it in order to avoid shock hazard for the

user.

Unpacking

Unpack the cabinet and ch eck that it

is in good condition and free of any

transport damage. Notify the dealer

immediately of any damage. Hand the

packaging over for recycling. For more

information, contact you r local council

or the dealer.

Do not allow ch ildren to play with the

packaging. The plastic film can cause

suffocation.

Electrical connection

Connect the cabinet to a grounded

electrical outlet.

Voltage: 230 V.

Fuse: 10 A.

Refer to the rating plate on the left

inside the cabinet.

Cleaning

Wash the inside of the cabinet using

lukewarm water, a mild washing-up

detergentandasoftcloth.

Remove the transport supports

Remove the transport supports placed

along the door sides.

Some models are fitted with a silencing

pad under the cabinet. Do not re move

this pad.

Installation of distance

Assemble the attach ed distance on

the back side of the panel according to

the illustration.

Installing the cabinet

When two appliances are placed

beside each oth er, the spacers

enclosed in the plastic wrapping

should be glued between the

appliances. As shown in the

illustration.

19

Make sure that the power plug is not

squashed or damaged by the back of

the product.

· A damaged power plug may

overheat an d cause a fire.

Do not place heavy articles or the

product itself on the power cord.

· there is a risk of a short circuit and

fire.

If th e power plug socket is loose, do not

insert the power plug.

· there is a risk of electric shock or fire.

To obtain the best performance from the

cabinet, ensure:

· the cabinet is placed in a dry, cool

place and is not exposed to direct

sunlight.

· the cabinet is not placed close to a

source of heat, e.g. a cooker or

dishwasher.

· the cabinet is level. The cabinet

should not lean against any wall. If

necessary adjust the feet using the

adjustment spanner supplied.

· there is good air circulation around

the cabinet and that the air chan n els

below and behind the cabinet are not

blocked. The ventilation space above

the cabinet must be at least 40 mm.

The ventilation space can either be

a) directly above the cabinet, or

b) behind and above the top cupboard.

In this case, the space behind the

cupboard must be at least 50 mm deep.

50mm

a)

b)

Cabinet is placed at a location where

the ambient temperature corresponds

to the climate classification*, for which

the appliance is designed.

* See on the rating plate on the inside

of the appliance.

The following table shows which

ambient temperature is correct for

each climate classification.

Climate

classifi-

cation

for an ambient

temperature of

+10°C to +32°C

+16°C to +32°C

+16°C to +38°C

+16°C to +43°C

SN

N

ST

T

If the cabinet is placed in a corner and

the side with the hinges facing the

wall, the distance between the wall

and the cabinet must be at least 60

mm to allow the door to open enough

so that the baskets can be removed.

The power plug must be accessible

after installation of the cabinet.

20

Door Reversal

1. Close the cabinet and remove the

plug from the electrical socket.

2. Remove the ventilation grille. There

is a part on the grille that can be

removed. Remove and reposition it on

the other side.

3. Put the cabinet on a wooden board

when it is laid down. Later, when

raising the cabinet, it will be easier to

grip under the cabinet thanks to the

boar d.

1

2

3

4. Unscrew the three screws on the

backside of the front cover

Remove the front cover

4

Unscrew the hinge pin

Remove the door

5. Unscrew the door stopper screw

Remove the door stopper

5

6. Remove the two cover lids on the

roof

7. Unscrew the two screws on the

hinge

6

7

8. Remove the cover on the front

8

Reassembly in reverse order on the

opposite side.

Raise the cabinet and replace the

ventilation grille.

9. To transfer the han dle.

Unscrew the scr ews. Fit the handle

onto the opposite side by turning it

one half circle. Press the supplied

plastic plugs into the holes to which

the handle was previously fitted.

9

Put the cabinet in position. C h eck that

the appliance is level. See the section

"Position in g the cabinet".

Page is loading ...

www.electrolux.com

www.electrolux.co.uk

www.electrolux.es

www.electrolux.pt

8184072-01/8 072008

Electrolux EUC31300S User manual

This manual is also suitable for

Electrolux EUC31300S User manual

in other languages

Related papers

Other documents