GA-7ZX-1

Gigabyte GA-7ZX-1, 7ZX Series, 7ZX-1, GA-7ZX User manual

  • Hello! I am an AI chatbot trained to assist you with the Gigabyte GA-7ZX-1 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valle
y
Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Mar. 20, 2001
Eric Lu
GA-7ZX
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-7ZX
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011
Limits and methods of measurement
EN 61000-3-2*
Disturbances in supply systems caused
of radio disturbance characteristics of
EN60555-2
by household appliances and similar
industrial, scientific and medical (ISM elect
r
ical equipment “Harmonics”
high frequency equipment
EN55013
Limits and methods of measurement
EN61000-3-3*
Disturbances in supply systems caused
of radio disturbance characteristics of
EN60555-3
by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014
Limits and methods of measurement
EN 50081-1
Generic emission standard Part 1:
of radio disturbance characteristics of
Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical
EN 50082-1
Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015
Limits and methods of measurement
EN 55081-2
Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020
Immunity from radio interference of
EN 55082-2
Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022
Limits and methods of measurement
ENV 55104
Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855
Cabled distribution systems; Equipment
EN 50091- 2
EMC requirements for uninterruptible
part 10
for receiving and/or
distribution
from power systems (UPS)
part 12
sound and television signals
CE marking
(EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065
Safety requirements for mains operated
EN 60950
Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335
Safety of household and similar
EN 50091-1
General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature
:
Rex Lin
(Stamp)
Date : Mar. 20, 2001 Name : Rex Lin
7ZX Series
AMD Athlon
TM
/Duron
TM
Socket A Processor
Motherboard
USER'S MANUAL
AMD Athlon
TM
/Duron
TM
Socket A Processor Motherboard
REV. 5.1 First Edition
R-51-01-010309
How This Manual Is Organized
This manual is divided into the following sections:
1) Revision History
Manual revision information
2) Item Checklist
Product item list
3) Features
Product information & specification
4) Hardware Setup
Instructions on setting up the motherboard
5) Performance & Block Diagram
Product performance & block diagram
6) Suspend to RAM & Dual BIOS
Instructions STR installation & Dual BIOS
7) Four Speaker & SPDIF
Four Speaker & SPDIF introduction
8) @BIOS
TM
& EasyTune
III
TM
@BIOS
TM
& EasyTune
III
TM
introduction
9) BIOS Setup
Instructions on setting up the BIOS
software
10) Appendix
General reference
Table Of Content
Revision History P.1
Item Checklist P.2
Summary of Features P.3
7ZX Series Motherboard Layout P.5
Page Index for CPU Speed Setup / Connectors / Panel and Jumper
Definition
P.6
Performance List P.22
Block Diagram P.23
Suspend to RAM Installation P.24
Dual BIOS Introduction (Optional) P.30
Four Speaker & SPDIF Introduction (Optional) P.37
@BIOS
TM
Introduction P.43
EasyTune
III
TM
Introduction P.44
Memory Installation P.46
Page Index for BIOS Setup P.47
Appendix P.78
7ZX Series Motherboard
1
Revision History
Revision Revision Note Date
5.1 Initial release of the 7ZX Series motherboard user’s
manual.
Mar. 2001
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information contained herein.
Third-party brands and names are the property of their respective owners.
Mar. 9, 2001 Taipei, Taiwan, R.O.C
Item Checklist
2
Item Checklist
;
The 7ZX Series motherboard
;
Cable for IDE / floppy device
;
CD (TUCD) for motherboard driver & utility
;
7ZX Series user’s manual
7ZX Series Motherboard
3
Summary Of Features
Form Factor
y
30.5 cm x 22.8 cm ATX size form factor, 4 layers PCB.
Motherboard
y
7ZX series includes 7ZX, 7ZX-1
CPU
y
AMD Athlon
TM
/Duron
TM
(K7) Socket A Processor
y
256K/64K L2
cache on die
y
Supports 600MHz ~ 1GHz and faster
y
7ZX support 100/133MHz FSB
y
7ZX-1 support 100MHz FSB
Chipset Apollo KT133, consisting of:
y
VT8363E/VT8363A Memory/AGP/PCI Controller (PAC)
y
VT82C686B PCI Super-I/O Integrated Peripheral
Controller (PSIPC)
Clock Generator
y
ICW W230H
y
ICW W230H
100/102/104/106/108/110/112/133 MHz system bus speeds
Memory
y
3 168-pin DIMM sockets
y
Supports PC-100 / PC-133 SDRAM and VCM SDRAM
y
Supports up to 1.5GB DRAM
y
Supports only 3.3V SDRAM DIMM
I/O Control
y
VT82C686B
Slots
y
1 AGP slot supports 4X mode & AGP 2.0 compliant
y
5 PCI slots supports 33MHz & PCI 2.2 compliant
y
1 AMR (Audio Modem Riser) slot
y
1 ISA slot (Optional)
On-Board IDE
y
Supports PIO mode 3, 4, UDMA 33/ATA 66/ATA 100&
ATAPI CD-ROM
y
2 IDE bus master (UDMA 33 / ATA 66 / ATA 100) IDE
ports for up to 4 ATAPI devices
On-Board
Peripherals
y
1 floppy port supports 2 FDD with 360K, 720K, 1.2M,
1.44M and 2.88M bytes
y
1 parallel ports supports Normal/EPP/ECP mode
y
2 serial ports (COM A & COM B)
y
4 USB ports
y
1 IrDA connector for IR
Hardware Monitor
y
CPU/System fan revolution detect
y
CPU/System temperature detect
y
System voltage detect
y
CPU overheat shutdown detect
To be continued…
Summary of Features
4
PS/2 Connector
y
PS/2
Keyboard interface and PS/2
Mouse interface
On-Board Sound
y
Creative CT5880 sound (Optional)
y
AC’97 CODEC
y
Line In/Line Out/Mic In/AUX In/CD In/TEL/Game Port
/Four Speaker & SPDIF (Optional)
BIOS
y
Licensed AMI BIOS, 2M bit flash ROM
y
Support Dual BIOS (Optional)
Additional Features
y
Support Wake-On-LAN (WOL)
y
Support Internal / External Modem Ring On
y
Support USB KB/MS Wake up from S3-S5
y
Includes 3 fan power connectors
y
Poly fuse for keyboard over-current protection
y
Support STR (Suspend-To-RAM) function
y
Support @BIOS™ and EasyTune
III
7ZX Series Motherboard
5
7ZX Series Motherboard Layout
7ZX
PCI1
PCI2
Socket A CPU
VT82C
686B
VT8363E
(VT8363A)
GAME & AUDIO
COM B
COM A
LPT
PS/2
J3
J16
J15
J18
BAT1
J2
BZ1
FLOPPY
IDE2
IDE1
AGP 1
JP6
SW1
J11
LED1
J13
J12
J4
JP4
USB1
JP8
AMR
PCI3
AC97
USB2
DIMM3
JP7
ATX POWER
DIMM2
DIMM1
PCI4
PCI5
ISA 1
MAIN
BIOS
BACK Up
BIOS
JP10
JP11
JP3
JP18
JP9
JP16
JP17
Creative
CT5880
Clock
Generator
JP21
7ZX Series Motherboard Layout
6
Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition
Page
CPU Speed Setup P. 7
Connectors P. 8
Game & Audio Port P.8
COM A / COM B / LPT Port P.8
USB 1 Connector P.9
USB 2 Connector P.9
PS/2 Keyboard & PS/2 Mouse Connector P.10
J3 (CPU Fan) P.10
JP6 (Power Fan) P.11
J2 (System Fan) P.11
ATX Power P.12
Floppy Port P.12
IDE 1(Primary) / IDE 2(Secondary) Port P.13
J16 (TEL) P.13
J15 (AUX_IN) P.14
J18 (CD Audio Line In) P.14
J13 (Ring Power On) P.15
J12 (Wake On LAN) P.15
JP8 / LED1 (STR LED Connector & DIMM LED) P.16
J4 (IR) P.16
Panel and Jumper Definition P.17
J11 (2x11 Pins Jumper) P.17
JP16/JP17/JP18 (AMR Select)[Optional] P.18
JP4 (Rear USB Device Wake Up Selection) P.18
JP7 (STR Function Enable) P.19
JP9 (Onboard Sound Function Selection)[Optional] P.19
JP11 (Front USB Device Wake Up Selection) P.20
JP10 (BIOS Write Protection)[Optional] P.20
JP3 (Clear CMOS Function)[Optional] P.21
BAT1 (Battery) P.21
7ZX Series Motherboard
7
CPU Speed Setup
The system bus speed is selectable at 100~133MHz. The user can select the system bus speed
by DIP switch
SW1 & JP21
.
Set System Bus Speed
SW1:
O: ON / X: OFF
FSB 1 2 3 4
95 O O X X
Ë
100 0 X X X
102 0 0 0 X
104 X X X 0
106 0 X X 0
108 0 0 X 0
110 0 X 0 0
112 0 0 0 0
133 0 X 0 X
JP21: CPU Clock Frequency (Optional)
Pin No. Definition
1-2 close 133MHz
2-3 close 100MHz (Default)
1
1
133MHz
100MHz
(Default)
JP21
SW1
Ë
The FSB Speed of the 7ZX(VIA KT133A) is 100/133MHz.
Ë
The FSB Speed of the 7ZX-1(VIA KT133E) is 100MHz.
0
AMD CPU Heat Sink Installation:
Beware: Please check that the heat sink is in good contact with the CPU before you turn on your
system.
The poor contact will cause over heat, and might cause damage to your
processor.
Connectors
8
Connectors
Game & Audio Port
Line Out 1: Line Out or SPDIF (The SPDIF output is
capable of providing digital audio to external speakers
or compressed AC3 data to an external Dolby digital
decoder). In general, Line Out 1 is normally Line Out,
when it output digital signal, it will be change to SPDIF
Out automatically (see page 40 for more information).
Line In: In general, Line In is normally Line In. When
you select “Four Speaker” in Creative application
(see page 37 for more information), Line In will be
change to Line Out 2, then you can plug 2 pairs stereo
speaker into Line Out 1 and Line In simultaneously.
MIC In
Game
Port
Line In / Line Out 2
Line Out 1
COM A / COM B / LPT Port
COM A
LPT Port
COM B
7ZX Series Motherboard
9
USB 1 Connector
Pin No. Definition
1 USB V0
2 USB D0-
3 USB D0+
4 GND
5 USB V1
6 USB D1-
7 USB D1+
8 GND
5 6
7
8
4
3
2 1
USB 2 Connector
Pin No. Definition
1 +5V
2 GND
3 USB D2-
4 NC
5 USB D2+
6 USB D3+
7 NC
8 USB D3-
9 GND
10 +5V
1
10
9
2
Connectors
10
PS/2 Keyboard & PS/2 Mouse Connector
PS/2
Mouse/Keyboard
Pin No. Definition
1 Data
2 NC
3 GND
4 VCC(+5V)
5 Clock
6 NC
PS/2 Keyboard
PS/2 Mouse
1 2
3
4
5
6
J3: CPU Fan
Pin No. Definition
1 Control
2 +12V
3 SENSE
1
7ZX Series Motherboard
11
JP6: Power Fan
Pin No. Definition
1 Control
2 +12V
3 NC
1
J2: Sysem Fan
Pin No. Definition
1 Control
2 +12V
3 SENSE
1
Connectors
12
ATX Power
Pin No. Definition
3,5,7,13,
15-17
GND
1,2,11 3.3V
4,6,19,20 VCC
10 +12V
12 -12V
18 -5V
8 Power Good
9 5V SB (stand by+5V)
14 PS-ON (Soft On/Off)
20 10
11
1
Floppy Port
Red Line
FDD1
7ZX Series Motherboard
13
IDE1 (Primary), IDE2 (Secondary) Port
IDE 1 IDE 2
Red Line
J16 TEL: The connector is for Modem with internal voice connector
Pin No. Definition
1 Signal-In
2 GND
3 GND
4 Signal-Out
1
/