2. PUIG
  3. 21087N Folding Bar End Mirror Cycle Gear

PUIG 21087N Folding Bar End Mirror Cycle Gear Installation guide

  • Hello! I've reviewed the mounting instructions for the Puig universal fold rearview mirrors, models 21087N and 20859N. This document details the installation process, including the use of spacers for various handlebar diameters and the plastic cap for covering the original support. I'm ready to answer any questions you have about the assembly or features of these rearview mirrors.
  • What handlebar diameter is suitable for these rearview mirrors?
    What should I do with the original support?
    Are spacers necessary for the installation?
INSTRUCCIONES DE MONTAJE - MOUNTING INSTRUCTIONS - MONTAGEANLEITUNG
Ref.: 20859N
MOTOPLASTIC, S.A.
Molí de la sal, 1 - 08403 Granollers (Barcelona) SPAIN
Tel. 34 93 849 06 33 - Fax 34 93 849 09 88
[email protected] - [email protected]
www.puig.tv
-
www.puigusa.com
RETROVISOR UNIVERSAL FOLD DERECHO
RIGHT FOLD UNIVERSAL REARVIEW
Created by: www.rrdisseny.com
Para manillares con diámetro interior entre 13 y 18 mm. Usar los
casquillos necesarios en función del DIÁMETRO INTERIOR.
For handlebars with INNER DIAMETER between 13 and 18 mm.
Use the necessary spacers according to the inner diameter.
Se suministra un tapón de plástico para
tapar el soporte original.
A plastic cap is provided to cover the
original support.
Manillar / Handlebar
INSTRUCCIONES DE MONTAJE - MOUNTING INSTRUCTIONS - MONTAGEANLEITUNG
Ref.: 21087N
MOTOPLASTIC, S.A.
Molí de la sal, 1 - 08403 Granollers (Barcelona) SPAIN
Tel. 34 93 849 06 33 - Fax 34 93 849 09 88
[email protected] - [email protected]
www.puig.tv
-
www.puigusa.com
RETROVISOR UNIVERSAL FOLD IZQUIERDO
LEFT FOLD UNIVERSAL REARVIEW
Created by: www.rrdisseny.com
Para manillares con diámetro interior entre 13 y 18 mm. Usar los
casquillos necesarios en función del DIÁMETRO INTERIOR.
For handlebars with INNER DIAMETER between 13 and 18 mm.
Use the necessary spacers according to the inner diameter.
Se suministra un tapón de plástico para
tapar el soporte original.
A plastic cap is provided to cover the
original support.
Manillar / Handlebar
/