ALFAtron 10X-CAM User guide

Type
User guide
www.alfatronelectronics.com
ALFATRON ELECTRONICS GmbH GERMANY
YouTube and Facebook Live Streaming Guide
YouTube and Facebook Streaming Guide
Streaming to YouTube
Please read the following steps to stream to YouTube.
Step 1:
Connect the camera to your network and make sure the network settings are correct
according to your network. Choose DHCP, or set your own IP address and DNS
Camera default IP is 192.168.5.163 and the Subnet of 255.255.255.0.
YouTube and Facebook Streaming Guide
Step 2:
Create your event on YouTube and get the following information.
YouTube will give you two parameters, "stream key" and "stream URL"
Step 3:
Fill these two parameters into the "Host Address" and "Stream Name" of the
camera. Then click enable and save.
1. Please update the camera with the latest firmware
( www.alfatronelectronics.com )
2. Copy the Stream url into the Host Address Field
3. Change the port number to 1935
4. Insert the Stream Key into the Stream Name Field
5. Click Enable and Save
NOTE: Please use the following format when inserting the Stream url into
the HOST Address on the camera. Please Remove rtmp:// and /live2. As
per below Image
NOTE: Please use the following format when inserting the Stream key into
the Stream Name on the camera. live2/”Stream Key”. As per Below image
YouTube and Facebook Streaming Guide
Step 4:
If the camera has an audio input, please enable on the settings on the camera.
Follow the camera prompts to reboot the camera for the settings to take effect.
YouTube and Facebook Streaming Guide
Step 5:
Once it has been set up as per above, the stream will be live on YouTube.
YouTube and Facebook Streaming Guide
Streaming to Facebook
Please read the following steps to stream to Facebook.
Step 1:
Connect the camera to your network and make sure the network settings are correct
according to your network. Choose DHCP, or set your own IP address and DNS.
Camera default IP is 192.168.5.163 and the Subnet of 255.255.255.0.
YouTube and Facebook Streaming Guide
Step 2:
Start a live video stream on Facebook and get the following information from
Facebook.
Facebook will give you two parameters, "stream key" and "server URL"
Step 3:
Fill these two parameters into the "Host Address" and "Stream Name" of the
camera. Then click enable and save.
1. Please also ensure that the camera has the latest firmware loaded.
Please check www.alfatronelectronics.com for the latest firmware.
2. Copy the complete Server url into the Host Address Field
3. Change the port number to match the server url ie: 443
4. Insert the Stream Key into the Stream Name Field
5. Click Enable and Save
YouTube and Facebook Streaming Guide
Step 4:
If the camera has an audio input, please enable audio on the ‘Audio
Configuration’ settings on the camera.
YouTube and Facebook Streaming Guide
Step 5:
Once it has been set up as per above, the stream will be live on YouTube.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

ALFAtron 10X-CAM User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI