Liebherr IK 3Z9fa1 Operating instructions

Brand: Liebherr

Model: IK 3Z9fa1

Category: Fridge-freezers

Type: Operating instructions

This manual is also suitable for

User Guide

Quality, Design and Innovation

home.liebherr.com/fridge-manuals

Contents

1 Appliance at a glance............................................ 3

1.1 Scope of delivery.......................................................... 3

1.2 Overview of the appliance and its equipment........ 3

1.3 SmartDevice.................................................................. 3

1.4 Appliance range of use............................................... 4

1.5 Conformity..................................................................... 4

1.6 SVHC substances according to REACH regulation. 4

1.7 EPREL database........................................................... 4

2 General safety instructions.................................. 4

3 Putting into operation........................................... 6

3.1 Switching on appliance............................................... 6

3.2 Inserting the components.......................................... 6

4 Foods management............................................... 6

4.1 Storing food.................................................................. 6

4.2 Storage times............................................................... 7

5 Saving energy........................................................ 7

6 Controls................................................................. 7

6.1 Controls and displays.................................................. 7

6.1.1 Status display..............................................................7

6.1.2 Navigation.................................................................... 7

6.1.3 Operating structure....................................................8

6.1.4 Display symbols.......................................................... 8

6.2 Control concept............................................................ 8

6.2.1 Activating/deactivating the function..................... 8

6.2.2 Selecting function value........................................... 8

6.2.3 Activating/deactivating settings.............................9

6.2.4 Selecting the setting value.......................................9

6.2.5 Go to the Customer menu......................................... 9

6.3 Functions....................................................................... 9

Turn off appliance.......................................................9

WiFi.............................................................................. 9

Temperature...............................................................10

C-Value*..................................................................... 10

SuperCool...................................................................10

PowerCool*.................................................................11

PartyMode...................................................................11

HolidayMode...............................................................11

SabbathMode............................................................ 11

E-Saver........................................................................12

CleaningMode............................................................ 12

Display brightness.................................................... 12

Door alarm..................................................................12

Entry lock....................................................................12

Info...............................................................................12

Reminder.....................................................................13

Reset........................................................................... 13

6.4 Fault messages............................................................ 13

6.4.1 Warnings.................................................................... 13

6.4.2 DemoMode................................................................. 13

7 Features................................................................. 13

7.1 4-star freezer compartment*..................................... 13

7.2 Door rack....................................................................... 13

7.3 Shelves.......................................................................... 14

7.4 Space for baking tray*................................................ 14

7.5 Drawers.......................................................................... 14

7.6 EasyFresh-Safe cover.................................................. 15

7.7 Adjusting the moisture levels.................................... 16

7.8 Accessories................................................................... 16

8 Maintenance.......................................................... 16

8.1 FreshAir carbon filter*................................................. 16

8.2 Disassembling / assembling pull-out systems...... 17

8.3 Defrosting the appliance............................................ 17

8.4 Defrosting the freezer compartment manually*.... 17

8.5 Cleaning the appliance............................................... 17

9 Customer help....................................................... 18

9.1 Technical specifications............................................. 18

9.2 Operating noises.......................................................... 18

9.3 Technical fault.............................................................. 19

9.4 Customer Services....................................................... 20

9.5 Model plate................................................................... 20

10 Shutting down....................................................... 20

11 Disposal................................................................. 20

11.1 Preparing appliance for disposal.............................. 20

11.2 Disposing of the appliance in an environmentally

friendly manner............................................................ 20

The manufacturer is continually working on the further

development of all types and models. Please be aware that

we reserve the right to make changes to the shape, equip‐

ment and technology.

Symbol Explanation

Read instructions

Please read the information in these instruc‐

tions carefully to understand all of the benefits

of your new appliance.

Full instructions on the internet

You can find detailed instructions on the

internet using the QR code on the front

of these instruction or by entering the

service number at home.liebherr.com/fridge-

manuals.

The service number can be found on the serial

tag:

Fig. Example illustration

Check appliance

Check all parts for transport damage. If you

have any complaints, please contact your

agent or customer service.

2 * Depending on model and options

Symbol Explanation

Differences

These instructions apply to a range of models,

so differences are possible. Sections that

apply to certain models only are marked with

an asterisk (*).

Instructions and results

Instructions are marked with a .

Results are marked with a .

Videos

Videos about the appliances are available on

the YouTube channels of Liebherr-Hausgeräte.

This User Guide applies to:

-IK 3Z9fa0

-IK 3Z9fa1

-ISK 4Z1ea0

-ISK 4Z1ea1

-IK 5Z1ea0

-IK 5Z1fa1

-IK 5Z1ea1

1 Appliance at a glance

1.1 Scope of delivery

Check all parts for damage during transport. If you have

any complaints, please contact your retailer or Customer

Services (see 9.4 Customer Services) .

Your new appliance comes with the following parts:

-Built-in appliance

-Features (depending on the model)

-Installation materials (depending on the model)

-“Quick Start Guide”

-“Installation Guide”

-Service Brochure

1.2 Overview of the appliance and its

equipment

Fig. 1 Example illustration

Temperature range

(A) Fridge section (B) EasyFresh

Features

(1) Controls (9) EasyFresh-Safe cover

(2) 4-star freezer* (10) EasyFresh-Safe

(3) Fan with FreshAir

active carbon filter*

(11) Drainage outlet

(4) Split shelf* (12) Nameplate

(5) Shelf (13) Vegetable drawer*

(6) VarioSafe* (14) Door rack

(7) Pull-out panel with

bottle basket*

(15) Bottle rack

(8) Space for baking tray*

Note

uShelves, drawers and baskets are arranged for optimum

energy efficiency when the appliance is delivered.

Changing how the shelves, for example, are inserted in

the fridge compartment does not have any impact on

energy consumption.

1.3 SmartDevice

SmartDevice is the networking solution for your refrigerator.

If your appliance SmartDevice-enabled or compatible, you

can quickly and easily connect your appliance to your

WiFi. With the SmartDevice app, you can operate your appli‐

ance from a mobile device. Additional functions and setting

options are available in the SmartDevice SmartDevice app.

SmartDevice-

compatible appli‐

ance:

Your appliance is compatible for use

with the SmartDeviceBox. You must

first purchase and install the Smart‐

DeviceBox. In order to connect your

appliance to the WiFi, you need to

download the SmartDevice app.

Appliance at a glance

* Depending on model and options 3

More information

about SmartDe‐

vice:

smartdevice.liebherr.com

Purchasing the

SmartDeviceBox

in the Liebherr-

Hausgeräte store:

home.liebherr.com/shop/de/deu/

smartdevicebox.html

Downloading the

SmartDevice app:

After installing and configuring the

SmartDevice, you can connect your

appliance to the WiFi using the

SmartDevice app and the WiFi appli‐

ance function (see WiFi) .

Note

You cannot use the SmartDeviceBox in the following coun‐

tries: Belarus, Kazakhstan, Russia. The SmartDevice func‐

tion is not available.

1.4 Appliance range of use

Intended use

The appliance is only suitable for cooling

food products in a domestic or household-like

environment. This includes, for example, use:

-in staff kitchens, bed and breakfast estab‐

lishments,

-by guests in country houses, hotels, motels

and other accommodation,

-for catering and similar services in the

wholesale trade.

The appliance is not suitable for freezing

food;*

All other types of use are not permitted.

Foreseeable misuse

The following applications are expressly

forbidden:

-Storing and refrigerating medicines, blood

plasma, laboratory preparations or similar

substances and products based on the

Medical Device Directive 2007/47/EC

-Use in areas at risk of explosions

Misusing the appliance may lead to damage

to the goods stored or they may spoil.

Climate classifications

Depending on the climate classification the

appliance is designed to operate in restricted

ambient temperatures. The climate classifica‐

tion applying to your appliance is printed on

the rating plate.

Note

uKeep to the specified ambient tempera‐

tures in order to guarantee that the appli‐

ance works properly.

Climate clas‐

sification

for ambient temperatures of

SN 10 °C to 32 °C

N 16 °C to 32 °C

ST 16 °C to 38 °C

T 16 °C to 43 °C

SN-ST 10 °C to 38 °C

SN-T 10 °C to 43 °C

1.5 Conformity

The refrigerant circuit has been tested for leaks. When

installed, the appliance complies with the applicable safety

regulations and with the corresponding directives.

The full text of the EU Declaration of Conformity is available

on the following website: www.Liebherr.com

1.6 SVHC substances according to

REACH regulation

You can check whether your appliance contains SVHC

substances according to REACH regulation at the following

link: home.liebherr.com/de/deu/de/liebherr-erleben/nach‐

haltigkeit/umwelt/scip/scip.html

1.7 EPREL database

Details about energy labelling and ecodesign requirements

will be available on the European product database (EPREL)

from 1st March 2021. You can access the product database

at the following link: https://eprel.ec.europa.eu/ You will be

asked to enter the model ID. You can find the model ID on

the nameplate.

2 General safety instructions

Please keep these operating instructions in a

safe place so you can refer back to them at

any time.

If you pass the appliance on, please hand

these operating instructions to the next user.

Read these operating instructions carefully

before use to ensure safe and correct use of

the appliance. Follow the instructions, safety

instructions and warning messages included

at all times. They are important for ensuring

you can operate and install the appliance

safely and without any problems.

Danger for the user:

-This device can be used by children and

people with impaired physical, sensory or

General safety instructions

4 * Depending on model and options

mental abilities or with a lack of experi‐

ence and knowledge provided that they

are supervised or have received instruction

in the safe use of this device, and about

the resulting hazards. Children must not

play with this appliance. Cleaning and user

maintenance work must not be carried out

by children without adult supervision. Chil‐

dren aged between 3 and 8 are allowed

to load and unload the appliance. Children

below the age of 3 must be kept away from

the appliance unless they are under contin‐

uous adult supervision.

-The socket must be easily accessible so

that the appliance can be disconnected

quickly from the electricity in an emer‐

gency. It must not be located in the area

behind the appliance.

-When disconnecting the appliance from the

supply, always take hold of the plug. Do not

pull the cable.

-In the event of a fault pull out the mains

plug or deactivate the fuse.

-Do not damage the mains power cable. Do

not operate the appliance with a defective

mains power cable.

-Only customer service or other specially

trained staff may repair or perform other

operations on the appliance.

-Only install, connect and dispose of the

appliance according to the instructions.

-Only use the appliance when is installed.

Fire hazard:

-The coolant used (information on the model

plate) is ecofriendly but also flammable.

Any leaking coolant may ignite.

•Do not damage the refrigerant circuit

pipes.

•Do not handle ignition sources inside the

appliance.

•Do not use electrical appliances inside

the appliance (e.g. steam cleaners,

heaters, ice cream makers, etc.).

•If the refrigerant leaks: remove any naked

flames or ignition sources from the

vicinity of the leakage point. Properly air

the room. Inform customer services.

-Do not store explosives or sprays using

combustible propellants such as butane,

propane, pentane, etc. in the appliance. To

identify these spray cans, look for the list

of contents printed on the can, or a flame

symbol. Gases possibly escaping may ignite

due to electrical components.

-Keep burning candles, lamps and other

items with naked flames away from the

appliance so that they do not set the appli‐

ance on fire.

-Please be sure to store alcoholic drinks

or other packaging containing alcohol in

tightly closed containers. Any alcohol that

leaks out may be ignited by electrical

components.

Danger of tipping and falling:

-Do not misuse the plinth, drawers, doors

etc. as a step or for support. This applies

particularly to children.

Danger of food poisoning:

-Do not consume food which has been

stored too long.

Danger of frostbite, numbness and pain:

-Avoid prolonged skin contact with cold

surfaces or refrigerated/frozen goods or

take protective measures, e.g wear gloves.

Danger of injury and damage:

-Hot steam can lead to injury. Do not use

electrical heating or steam cleaning equip‐

ment, open flames or defrosting sprays to

defrost.

-Do not use sharp implements to remove the

ice.

Risk of crushing:

-Do not hold the hinge when opening and

closing the door. Fingers may get caught.

Symbols on the appliance:

This symbol may be located on the

compressor. It relates to the oil in the

compressor and makes reference to the

risk that: Swallowing or inhaling can be

fatal. This advice is only relevant to recy‐

cling. There is no danger in normal opera‐

tion.

This symbol is located on the compressor

and indicates the danger of flammable

materials. Do not remove the sticker.

This or a similar sticker may be located

on the rear of the appliance. This sticker

indicates that there are vacuum insulation

panels (VIP) or perlite panels in the door

and/or housing. This advice is only relevant

to recycling. Do not remove the sticker.

Please note the warning messages and other

specific advice in the other chapters:

DANGER indicates an immediately

hazardous situation which will

lead to death or serious injuries if

it is not avoided.

WARNING indicates a hazardous situation

which may lead to death or serious

injuries if it is not avoided.

General safety instructions

* Depending on model and options 5

CAUTION indicates a hazardous situation

which may lead to minor or

moderate injuries if it is not

avoided.

NOTICE indicates a hazardous situation

which may lead to damage to

property if it is not avoided.

Note indicates useful instructions and

tips.

3 Putting into operation

3.1 Switching on appliance

Ensure that the following conditions are met:

qAppliance is installed and connected according to instal‐

lation instructions.

qAll adhesive strips, adhesive and protective films as well

as transport safety devices in and on the appliance are

removed.

qAll marketing leaflets are removed from the drawers.

Fig. 2

uSwitch on the appliance using the control panel next to

the display.

wThe status display appears.

The appliance starts in DemoMode:

If the appliance starts in DemoMode, you can deactivate

DemoMode within the next 5 minutes.

Fig. 3

uPress Confirm next to the display for 3 seconds.

wDemoMode is deactivated.

Note

The manufacturer recommends:

uPlace the food inside: Wait for around 6 hours until the

set temperature is reached.

uStore frozen foods at -18 °C or colder.*

3.2 Inserting the components

Note

Accessories can be purchased from the Liebherr-

Hausgeräte store at home.liebherr.com/shop/de/deu/

zubehor.html.

uInsert the supplied components to make the most of your

appliance.

4 Foods management

4.1 Storing food

WARNING

Risk of fire

uDo not use any electrical appliances in the food area of

the appliance unless recommended by the manufacturer.

Note

The energy consumption increases and the cooling power

goes down if ventilation is not sufficient.

uAlways keep air slots clear.

When storing food, always observe the following:

qAir vents on the inside rear wall are unobstructed.

qAir vents on the fan are unobstructed.*

qFood is in sealed packaging.

qFoods that easily absorb or give off smell or taste are

stored in sealed containers or covered.

qRaw meat and fish are in clean, sealed containers to

prevent them coming into contact with or dripping onto

other foods.

qLiquids are in sealed containers.

qFoods are not stored too closely together, as the air

needs to circulate.

Note

Failure to follow these guidelines can lead to food perishing.

4.1.1 Fridge section

The natural air circulation creates a range of temperatures.

Arrange your food as follows:

uIn the top section and in the door: butter and cheese,

preserves and tubes.

uIn the coldest zone Fig. 1 (C): Perishable foods such as

ready-to-eat meals, meat and sausages

uOn the bottom shelf: Raw meat and fish

4.1.2 EasyFresh-Safe

This compartment is great for non-packaged foods, such as

fruit and vegetables.

The air moisture in the compartment depends on the mois‐

ture content of the items being stored and the number of

times the door is opened. You can adjust the air moisture.

Arrange your food as follows:

uStore your loose fruit and vegetables.

uExcessive air moisture: Regulate the air humidity

(see 7.7 Adjusting the moisture levels) .

4.1.3 Freezer compartment*

The air temperature can vary in the compartment when

shown on a thermometer or other gauges. The temperature

varies more when the compartment is half-full or empty and

can rise to more than -18 °C.

Putting into operation

6 * Depending on model and options

Freezing food

You can freeze as many kilograms of fresh food within 24

hours as is indicated on the model plate .

So that the food is rapidly frozen through to the core, keep

to the following quantities per pack:

-Fruit, vegetables up to 1 kg

-Meat up to 2.5 kg

Arrange your food as follows:

CAUTION

Risk of injury from glass fragments!

Drink bottles and cans may explode if frozen. This applies

particularly to carbonated drinks.

uDo not freeze bottles and cans of drink!

uPut the packaged food into the freezer compartment so

that it is in contact with the floor or the side walls.

Defrost the food

- In the fridge

- In the microwave

- In the stove/oven

- At room temperature

WARNING

Risk of food poisoning!

uDo not re-freeze thawed food.

uOnly take out the food you need at the time.

uCook defrosted food as soon as possible.

4.2 Storage times

Refer to the specified storage times as a guide.

In the case of foods with a minimum shelf life, the date

indicated on the packaging still applies.

4.2.1 Fridge section

Always follow the best-before date stated on the packaging.

4.2.2 Freezer compartment*

Recommended shelf-lives for various types of food

Ice cream at -18 °C 2 to 6 months

Cold cuts, ham at -18 °C 2 to 3 months

Bread, baked goods at -18 °C 2 to 6 months

Game, pork at -18 °C 6 to 9 months

Fatty fish at -18 °C 2 to 6 months

Lean fish at -18 °C 6 to 8 months

Cheese at -18 °C 2 to 6 months

Poultry, beef at -18 °C 6 to 12 months

Vegetables, fruit at -18 °C 6 to 12 months

5 Saving energy

-Pay attention to good ventilation. Do not cover ventilation

holes or grids.

-Always keep the fan air slits clear.*

-Do not install the appliance in direct sunlight, next to an

oven, radiator or similar.

-Energy consumption depends on the installation condi‐

tions, e.g. the ambient temperature (see 1.4 Appliance

range of use) . A warmer ambient temperature can

increase the energy consumption.

-Open the appliance for as short a time as possible.

-The lower the temperature is set the higher the energy

consumption.

-Sort your food: home.liebherr.com/food.

-Keep all food properly packed and covered. This prevents

frost from forming.

-Only take food out for as long as necessary so that it

doesn’t warm up too much.

-Inserting warm food: allow to cool down to room temper‐

ature first.

-Thaw frozen food in the refrigerator.*

-If there is a thick layer of frost in the appliance: defrost

the appliance.*

-For longer periods of absence, use HolidayMode

(see HolidayMode) .

6 Controls

6.1 Controls and displays

The display provides a quick overview of the temperature

setting and the status of functions and settings. You

can control the functions and settings either by deacti‐

vating/activating them or by selecting a value.

6.1.1 Status display

Fig. 4

(1) Temperature display of

the fridge section

The Status display shows the set temperature and is the

home display. From there, you can navigate to the options

and settings.

6.1.2 Navigation

Navigate in the menu to access the individual functions.

An audible signal sounds after confirming a function or

setting. If no selection is made after 10 seconds the display

switches to the Status display.

The appliance is operated with the buttons next to the

display.

Fig. 5

(1) Navigation arrow left/

right

(2) Confirm

Navigation arrow left/right Fig. 5 (1):

-Navigating in the menu. After the last menu page, it goes

back to the first one.

Saving energy

* Depending on model and options 7

Confirm Fig. 5 (2):

-Activating/deactivating a function.

-Open a submenu.

-Confirm a selection. After confirmation the display

switches back to the menu.

Back to Status display: in the fastest manner:

-Close and open the door.

-or wait 10 seconds. The display switches to the Status

display.

6.1.3 Operating structure

The controls are explained by a template. The display

changes depending on the function or settings.

Menus without a submenu

Fig. 6

(1) Status deactivated /

status activated white

bar in the top area

(3) Menu: Function name or

menu: Setting name

(2) Symbol or activated

value

Menus with a submenu

Fig. 7

(1) Menu: Function name

or menu: Setting name

(3) Symbol or activated

value

(2) Status (4) Submenu: function name

or submenu: Setting

name

(2) off / on

You can navigation as follows:

-Press the left/right Fig. 5 (1) arrow to navigate.

-Press Confirm Fig. 5 (2) to open the submenu Fig. 7 (4).

•Press the left/right Fig. 5 (1) arrow to navigate.

•Set a new value: Press Confirm Fig. 5 (2) to select an

active value Fig. 6 (1).

•Back to the menu: Press Confirm Fig. 5 (2) to select the

active value Fig. 6 (2).

6.1.4 Display symbols

Display symbols provide information on the current appli‐

ance status:

Symbol Appliance status

Standby

The appliance or temperature zone

is switched off.

Flashing number

Appliance is working. Temperature

flashes until the set value is

reached.

Flashing symbol

Appliance is working. Setting is

made.

Bar grows steadily

Function is activated.

6.2 Control concept

6.2.1 Activating/deactivating the function

You can activate/deactivate the following functions:

Symbol Function

SuperCoolx

*PowerCoolx*

PartyModex

HolidayMode

E-Saver

x When function is on, the appliance works harder. This

means appliance noise when operating may be louder for

a short while, and more energy will be consumed.

uPress the navigation arrows Fig. 5 (1) repeatedly until the

function is displayed.

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears in the menu.

wFunction is on/off.

6.2.2 Selecting function value

With the following functions you can set a value in the

submenu:

Symbol Function

Setting the temperature

Switch the appliance on/off

uTap the navigation arrows Fig. 5 (1) repeatedly until the

function is displayed.

uPress Confirm Fig. 5 (2).

uSelect the setting value with the navigation arrows

Fig. 5 (1).

Setting the temperature

uPress Confirm Fig. 5 (2).

Controls

8 * Depending on model and options

wYou hear the confirmation tone.

wStatus: On Fig. 6 (1) appears briefly in the submenu

Fig. 7 (4).

wDisplay switches back to the menu.

6.2.3 Activating/deactivating settings

You can activate/deactivate the following settings:

Symbol Setting

WiFi1

Entry lock2

SabbathMode2

Cleaning Mode2

Reminders1

Reset2

Switch off 2

uTap the navigation arrows Fig. 5 (1) repeatedly until the

settings appear.

uPress Confirm Fig. 5 (2).

uTap the navigation arrows Fig. 5 (1) repeatedly until the

desired setting is displayed.

1 Activate setting (shortpress)

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears in the menu.

wSetting is on / off.

2 Activate setting (longpress)

uTo Confirm Fig. 5 (2), press for 3 seconds.

wYou hear the confirmation tone.

wStatus appears in the menu.

wDisplay changes.

6.2.4 Selecting the setting value

With the following settings you can set a value in the

submenu:

Symbol Settings

Brightness

Door alarm

uTap the navigation arrows Fig. 5 (1) repeatedly until

settings appears.

uPress Confirm Fig. 5 (2).

uTap the navigation arrows Fig. 5 (1) repeatedly until the

desired setting is displayed.

uPress Confirm Fig. 5 (2).

uSelect the setting value with the navigation arrows

Fig. 5 (1).

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears briefly in the submenu.

wDisplay switches back to the menu.

6.2.5 Go to the Customer menu

You can see the following settings in the Customer menu:

Symbol Function

C-Value 1*

Software

uPress the navigation arrows Fig. 5 (1) repeatedly until the

settings appear.

uPress Confirm Fig. 5 (2).

uPress the navigation arrows Fig. 5 (1) repeatedly until the

appliance information appears in the display.

uPress Confirm Fig. 5 (2).

uEnter the numerical code 151.

wThe customer menu appears.

uPress the navigation arrows Fig. 5 (1) repeatedly in the

customer menu until the desired setting appears.

1 Select the value

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears briefly in the display.

wDisplay switches back to the menu.

2 Activate the setting

uToConfirm Fig. 5 (2), press for 3 seconds.

wYou hear the confirmation tone.

wStatus appears on the display.

wThe symbol flashes as long as the appliance is working.

6.3 Functions

Turn off appliance

This setting turns off the whole appliance.

Switching off the entire appliance

Fig. 8

uActivating/deactivating (see 6.2 Control concept) .

wOff: Display goes black.

WiFi

Use this function to connect your appliance to the WiFi. You

can then operate it via the SmartDevice app on a mobile

device. You can also use this function to disconnect or reset

the WiFi connection. To connect your appliance to the WiFi,

you need the SmartDeviceBox. For more information about

the SmartDeviceBox and how to use the SmartDevice app:

(see 1.3 SmartDevice)

Controls

* Depending on model and options 9

Note

You cannot use the SmartDeviceBox in the following coun‐

tries: Belarus, Kazakhstan, Russia. The SmartDevice func‐

tion is not available.

Establishing a WiFi connection

Make sure that the following requirements are fulfilled:

qYou have purchased and inserted a SmartDeviceBox.

(see 1.3 SmartDevice)

qYou have installed the SmartDevice app (see

apps.home.liebherr.com).

Fig. 9

uActivate the setting. (see 6.2 Control concept)

wConnection is established: Status: activated Fig. 6 (1) and

WiFi connecting appears. The symbol flashes.

wConnection is established: Status: activated Fig. 6 (1)

appears.

wConnection failed: Status and Connect appear. The

symbol is permanently visible.

Disconnecting from the WiFi

uDeactivate the setting. (see 6.2 Control concept)

Fig. 10

There is no connection: Symbol is permanently

visible.

Resetting the WiFi connection

uReset settings. (see 6.2 Control concept)

Fig. 11

wThe connection and other settings are reset to the

factory settings.

Temperature

The temperature depends on the following factors:

-The amount of times the door is opened

-How long the door is open for

-The room temperature of the installation site

-The type, temperature and amount of food

Temperature zone Recommended setting

Fridge section 5 °C

Setting temperature

Fig. 12

uComplete the steps.

wTemperature is set.

C-Value*

The C-Value enables the 4-star freezer compartment to be

set to a slightly warmer or colder temperature.*

The C-Value is set to C5 by default.*

The 4-star freezer compartment becomes colder if the value

is set to less than C5. The 4-star freezer compartment

becomes warmer if the value is set to more than C5.*

Selecting the setting value*

uSet value in customer menu (see 6.2 Control concept) .

SuperCool

This function selects the lowest cooling temperature. This

gives you colder storage temperatures.

This function is relevant to the fridge section Fig. 1 (A)

You can also reach lower temperatures in the 4-star

freezer.*

Use:

-Cool large amounts of food quickly.

-Freeze food.*

Activating/deactivating the function

uUsing the 4-star freezer: activate the function when you

add the goods.*

uUsing the fridge section: activate the function when you

add the goods.

uActivating/deactivating (see 6.2 Control concept) .

The function automatically turns off. The appliance goes

back to normal mode. The temperature adjusts itself to the

set level.

Controls

10 * Depending on model and options

PowerCool*

This function provides the perfect blanket temperature to

cool your food.*

This function refers to the fridge section Fig. 1 (A).*

Use:*

-At higher room temperatures (from approx. 35 °C )

-When humidity is high e.g. on summer days

-When storing moist goods, to avoid condensation

building up inside

Activating/deactivating the function*

uActivating/deactivating (see 6.2 Control concept) .

Note

The fan can run even when function is deactivated. This

ensures optimal temperature distribution in the appliance.

wFunction activated: Energy consumption of the appliance

is slightly increased.

PartyMode

This option offers an assortment of special functions and

settings that are useful if you are having a party.

The following functions are on:

-SuperCool

All the functions can be adjusted flexibly and separately.

Changes are discarded when the function turns off.

Activating/deactivating the function

uActivating/deactivating (see 6.2 Control concept) .

wOn: All functions are activated at the same time.

wDeactivated: Previously set temperatures are restored.

After 24 hours the function turns off automatically.

HolidayMode

This function minimises the energy consumption during

an extended absence. The temperature of the refrigerator

compartment is set to 15 °C and this is displayed on the

status screen when the temperature has been reached.

Use:

-Save energy if you plan to be away for a while.

-Avoid coming home to bad smells and mould.

Activating/deactivating the function

uEmpty everything from the fridge section.

uActivating/deactivating (see 6.2 Control concept) .

wOn: Fridge temperature is raised.

wOff: the previously set temperature is restored.

SabbathMode

With this function you can activate or deactivate the

SabbathMode. If you activate this function, some electronic

functions will be switched off. This allows your appliance to

meet religious requirements on Jewish holidays such as the

Sabbath and comply with STAR-K Kosher certification.

Appliance status with active SabbathMode

The status display continuously shows SabbathMode.

Appliance status with active SabbathMode

All functions in the display except the Deactivate

SabbathMode function are locked.

Active functions remain active.

The display stays lit when you close the door.

The interior lighting is off.

Reminders are disabled. The set time intervals are paused.

Reminders and warnings are not displayed.

There is no door alarm.

There is no temperature alarm.

The defrost cycle only works for the specified time without

taking account of appliance use.

After a power failure, the appliance returns to

SabbathMode.

Appliance status

Note

This appliance has certification from the “Institute for

Science and Halacha”. (www.machonhalacha.co.il)

You can find a list of STAR-K-certified appliances at

www.star-k.org/appliances.

Activating SabbathMode

WARNING

Danger of food poisoning from spoiled food!

If you have SabbathMode activated and a power failure

occurs, no message appears in the status display about the

power failure. Once the power is restored, the appliance

continues to operate in SabbathMode. The power failure

may mean that food spoils and the consumption of this food

could lead to food poisoning.

After a power failure:

uDo not consume food that was frozen and has thawed

out.

uCall up the settings menu. (see 6.2 Control concept)

uTap the navigation arrow repeatedly until the corre‐

sponding function is displayed.

Fig. 13

uComplete the steps (see Fig. 1453) .

wSabbathMode is activated.

wStatus display continuously shows SabbathMode.

Deactivating SabbathMode

uCall up the settings menu. (see 6.2 Control concept)

uTap the navigation arrow repeatedly until the corre‐

sponding function is displayed.

Fig. 14

Controls

* Depending on model and options 11

uComplete the steps (see Fig. 1454) .

wSabbathMode is deactivated.

E-Saver

This function activates or deactivates the energy-saving

mode. When you activate this function, the energy

consumption decreases and the temperature increases by

2 °C in the appliance. The food remains fresh, but the shelf

life is shortened.

Temperature zone Recommended

setting (see

Temperature)

Temperature

when E-Saver

activated

Fridge

compartment

5 °C 7 °C

Temperatures

Activating E-Saver

uTap navigation arrow repeatedly until corresponding

function is displayed.

E-Saver

Fig. 15

uComplete the steps (see Fig. 1455) .

wEnergy-saving mode is activated.

Deactivating E-Saver

uTap navigation arrow repeatedly until corresponding

function is displayed.

E-Saver

Fig. 16

uComplete the steps (see Fig. 1456) .

wEnergy-saving mode is deactivated.

CleaningMode

Use this setting to easily clean the appliance.

This setting refers to the fridge section Fig. 1 (A).

Use:

-Clean the fridge section by hand.

What happens on the appliance when this setting is on:

-The fridge section is switched off.

-The internal light is on.

-Reminders and warnings are not shown. There is no

acoustic signal.

Activating/deactivating settings

uActivating/deactivating the setting (see 6.2 Control

concept) .

wOn: fridge section is off. Light stays on.

wOff: preset temperature is restored.

After 60 min the setting turns off automatically. The appli‐

ance then continues running in normal mode.

Display brightness

Set the brightness level of the display.

You can set the following brightness levels:

-40%

-60%

-80%

-100%

Choose the setting

uSet the level (see 6.2 Control concept) .

Door alarm

Set the time before the door alarm (see Close the door)

sounds.

The options are as follows:

-1 min

-2 min

-3 min

-Off

Choose the setting

uSet the time (see 6.4 Fault messages) .

Entry lock

This setting prevents unintentional use of the appliance,

e.g. by children.

Use:

-Avoid settings being changed unintentionally.

-Avoid the appliance being switched off unintentionally.

-Avoid the temperature being changed unintentionally.

Activating/deactivating settings

uActivating/deactivating. (see 6.2 Control

concept)

Info

This setting allows the appliance information to be read out

as well as access to the customer menu.

It provides the following information:

-Model name

-Index

-Serial number

-Service number

Show appliance data

uTap the navigation arrows Fig. 5 (1) repeatedly until the

settings appear.

uPress Confirm Fig. 5 (2).

uTap the navigation arrows Fig. 5 (1) repeatedly until the

information is displayed.

uRead the appliance info.

Controls

12 * Depending on model and options

Reminder

Reminders are given out acoustically by a beep and visually

by a symbol in the display. The signal gets louder until the

alert stops.

Replace FreshAir active carbon filter*

This message appears when the air filter needs replacing.

uChange the air filter every six months.

uConfirm the message with OK.

wThe service interval resets.

wThe air filter guarantees the air quality in the fridge.

Activating the setting

uActivating/deactivating (see 6.2 Control concept) .

Reset

This function resets all settings to the factory settings. All

settings that you have made thus far will be reset to their

original values.

Activating the setting

uActivate (see 6.2 Control concept) .

6.4 Fault messages

Fault messages appear in the display. There are two catego‐

ries of fault message:

Category Meaning

Message Reminder of general procedures. You can carry

out these procedures to eliminate the message.

Warning Appears when there are malfunctions. A signal

sounds in addition to the display. The signal

becomes louder until you acknowledge by

tapping the display. You can eliminate simple

defects yourself. For more serious defects, you

must contact customer service.

6.4.1 Warnings

Close the door

This message appears if the door is open for too long.

You can set how long it takes for this message to appear .

uStop alarm: Confirm the message.

-or-

uClose the door.

Error

This message appears if there is a fault with the appliance.

An appliance component indicates a fault.

uOpen the door.

uNote down the fault code.

uConfirm the message.

wThe signal tone stops.

wThe status display appears.

uClose the door.

uContact customer service. (see 9.4 Customer Services)

6.4.2 DemoMode

If “D” appears on the display, demo mode is on. This option

is designed for retailers, as it turns off all the cooling func‐

tions.

Stopping DemoMode

If you see the following running in the display:

uConfirm the display within the countdown.

wDemoMode is off.

If the timer is not running:

uUnplug the appliance.

uPlug the appliance in again.

wDemoMode is off.

7 Features

7.1 4-star freezer compartment*

7.1.1 Opening/closing the freezer compartment

Fig. 17

Opening the freezer compartment:

uReach into the handle area from below.

uPush the handle plate while pulling the door towards you.

Closing the freezer compartment:

uClose the door while pushing from the front.

wDoor is engaged.

7.2 Door rack

7.2.1 Move/remove the door rack

Fig. 18

uSlide the rack upwards.

uPull forwards.

uRe-insert it in reverse order.

Features

* Depending on model and options 13

7.2.2 Disassembling the door rack

The door rack can be taken apart for cleaning.

Fig. 19

uDisassemble the door rack.

7.3 Shelves

7.3.1 Adjusting/removing the shelves

The shelves are prevented from being pulled out acciden‐

tally by pull out stops.

Fig. 20

uLift the shelf and pull forward.

wLine up the side runner.

uAdjust the height of the shelf: Lift or lower it to the

desired height and slide it in.

-or-

Fig. 21

uRemove the shelf completely: Pull it out to the front.

uEasier removal: Set the shelf at an angle.

uInsert the shelf again: Slide it in all the way.

wThe pull-out stoppers point downwards.

wThe pull-out stoppers are behind the front support.

You can also remove the shelf above the EasyFresh

compartments.

Fig. 22

Removing the shelf:

uLift the shelf at the front and back.

uPull it out towards you.

Do not store any goods on the compartment cover below!

Inserting the shelf:

uPlace the shelf at an angle, sloping down towards the

back.

wThe pull-out stoppers point downwards.

uSlide the shelf into place.

7.3.2 Dismantling the shelves

The shelves can be dismantled for cleaning.

Fig. 23

uDismantling the shelf.

7.4 Space for baking tray*

There is space for a baking tray Fig. 1 (8) above the drawers.

Fig. 24

Ensure that the following conditions are met:

qMax. baking tray dimensions are adhered to (see 9.1 Tech‐

nical specifications) .

qBaking tray is cooled to room temperature.

qThe lowest door rack is set at least one position higher.

With the door open to 90°:

uSlide the baking tray onto the lower side runners.

7.5 Drawers

You can remove the drawers for cleaning.

The way to remove/insert the drawers varies depending

on the pull-out system. Your appliance can contain various

pull-out systems.

Note

The energy consumption increases and the cooling power

goes down if ventilation is not sufficient.

uAlways leave the fan air vents clear on the back wall!

Features

14 * Depending on model and options

7.5.1 Drawer on appliance base or glass shelf

The drawer runs directly on the appliance base or on a glass

shelf. There are no rails.

Removing drawer

Fig. 25

uRemove drawer as shown in the illustration.

Inserting drawer

Fig. 26

uInsert drawer as shown in the illustration.

7.5.2 Drawer on rails

Removing drawer

Fig. 27

uRemove drawer as shown in the illustration.

Inserting drawer

Fig. 28

uInsert drawer as shown in the illustration.

7.5.3 Drawer on telescopic rails

The drawer runs on extendible rails (telescopic rails). There

are fully extendible telescopic rails and telescopic rails with

partial pull-out. Drawers which are fully extendible can be

pulled out fully from the appliance. Drawers with partial

pull-out cannot be removed fully from the appliance. The

system in your appliance depends on the type of appliance.

Partial pull-out fridge compartment

Removing drawer

Fig. 29

uPull out drawer half-way. Fig. 29 (1)

uLift the drawer from the bottom. Fig. 29 (2)

uLift and hold the drawer and at the same time pull it

forwards.

uInsert left rail. Fig. 29 (3)

uInsert right rail. Fig. 29 (4)

uRemove drawer to the front. Fig. 29 (5)

Fig. 30

If the rails are not yet fully inserted after removing the

drawer:

uPush rails in completely.

Inserting drawer

Fig. 31

uSlide rails in.

uPlace drawer on rails.

uSlide in drawer to the back.

7.6 EasyFresh-Safe cover

You can remove the compartment cover for cleaning.

7.6.1 Removing the compartment cover

Fig. 32

When the drawers are removed:

uPull the lid up at the front to the opening in the retaining

parts Fig. 32 (1).

uLift from the back and pull it up and out Fig. 32 (2).

Features

* Depending on model and options 15

7.6.2 Inserting the compartment cover

Fig. 33

If the text THIS SIDE UP points upwards:

uInsert the lip of the cover over the opening of the rear

bracket Fig. 33 (1) and click into place Fig. 33 (2).

uPosition the cover where you want it (see 7.7 Adjusting

the moisture levels) .

7.7 Adjusting the moisture levels

You can adjust the moisture in the drawer yourself by

adjusting the compartment cover.

The compartment lid is attached to the drawer and can be

hidden by a shelf or additional drawers.

Fig. 34

Low air humidity

uOpen the drawer.

uSlide the compartment cover forwards.

wWith the drawer closed: Gap between the cover and the

compartment.

wThe air moisture in the Safe decreases.

High air moisture

uOpen the drawer.

uSlide the cover back.

wWith the drawer closed: The cover seals the compart‐

ment.

wThe air moisture in the Safe increases.

If there is too much moisture in the compartment:

uChoose the setting “low air moisture”.

-or-

uRemove any excess moisture with a cloth.

7.8 Accessories

7.8.1 Egg rack

You can pull out and turn the egg rack. You can use both

sides of the egg rack so you can label specifics like the

purchase date.

Using the egg rack

Fig. 35

uTop layer: for storing hen eggs.

uBottom layer: for storing quail eggs.

7.8.2 Bottle holder

Using the bottle holder

Fig. 36

uPush the bottle holder onto the bottles.

wThe bottles are prevented from falling over.

Removing the bottle holder

Fig. 37

uMove the bottle holder all the way to the right.

uPush the bottle holder to the back to remove.

8 Maintenance

8.1 FreshAir carbon filter*

The FreshAir carbon filter is in the compartment above the

fan.

It guarantees the best air quality.

qReplace the carbon filter every 6 months.

When the reminder is set, a message on the display

prompts you to change it.

qThe carbon filter can be disposed of with the regular

household waste.

Note

FreshAir activated charcoal filters can be purchased

from the Liebherr-Hausgeräte store at home.liebherr.com/

shop/de/deu/zubehor.html.

Maintenance

16 * Depending on model and options

8.1.1 Removing the FreshAir carbon filter

Fig. 38

uPull out the compartment Fig. 38 (1).

uRemove the carbon filter Fig. 38 (2).

8.1.2 Inserting the FreshAir carbon filter

Fig. 39

uInsert the carbon filter as shown in the diagram

Fig. 39 (1).

wThe carbon filter clicks into place.

If the carbon filter is pointing downwards:

uPush the compartment in Fig. 39 (2).

wThe carbon filter is now ready for use.

8.2 Disassembling / assembling pull-

out systems

8.2.1 Notes on disassembly

You can disassemble some of the pull-out systems for

cleaning. Your appliance can contain a variety of pull-out

systems.

The following pull-out systems can be disassembled or

cannot be disassembled:

Pull-out system can be disassembled /

cannot be disassembled

Drawer on appliance base or

glass shelf

cannot be disassembled

Drawer on rails cannot be disassembled

Partial pull-out fridge compart‐

ment

cannot be disassembled

8.3 Defrosting the appliance

WARNING

Improper defrosting of the appliance!

Injuries and damage.

uDo not use mechanical equipment or other methods to

speed up the defrosting process other than those recom‐

mended by the manufacturer.

uDo not use electrical heating or steam-cleaning appli‐

ances, naked flames or defroster sprays to defrost.

uDo not use sharp objects to remove ice.

Defrosting is performed automatically. The water from the

thawing process drains through the outlet and evaporates.

Water drops or a thin layer of frost or ice can form on the

back wall; this is a completely normal part of the applian‐

ce’s function. This must not be removed.

A layer of frost or ice can from briefly due to the energy-

optimised control of the device.

uClean the drain opening regularly (see 8.5 Cleaning the

appliance) .

8.4 Defrosting the freezer compartment

manually*

A layer of frost or ice forms after prolonged use.

The following factors promote the formation of frost or ice:

- The appliance is opened frequently.

- Hot food is put in.

uSwitch off the appliance .

uPull out the mains plug or switch off the fuse.

uWrap the frozen produce in newspaper or blankets and

store in a cool place.

uPlace a pan of hot water (not boiling) on the middle shelf.

wThis speeds up the defrosting process.

uLeave the compartment and appliance door open during

defrosting.

uRemove loosened pieces of ice.

uMake sure that there is no melted ice water in the

cabinet.

uSoak up the melted ice water with a sponge or cloth

several times as necessary.

uClean the appliance (see 8.5 Cleaning the appliance) .

8.5 Cleaning the appliance

8.5.1 Ready

WARNING

Danger of electric shock!

uRemove the refrigerator connector or interrupt the power

supply.

WARNING

Risk of fire

uDo not damage the refrigeration circuit.

uEmpty the appliance.

uRemove mains connector.

-or-

Maintenance

* Depending on model and options 17

uActivate CleaningMode. (see CleaningMode)

8.5.2 Cleaning the interior

NOTICE

Improper cleaning!

Damage to the appliance.

uOnly use soft cleaning cloths and ph-neutral all-purpose

cleaners.

uDo not uses abrasive sponges or steel wool which may

cause scratches.

uDo not use any sharp or abrasive cleaning agents, nor

any that contain sand, chloride or acid.

uPlastic surfaces: clean by hand with a soft clean cloth,

lukewarm water and a little detergent.

uMetal surfaces: clean by hand with a soft clean cloth,

lukewarm water and a little detergent.

uDrain hole: remove deposits using a thin item (for

example a cotton bud).

8.5.3 Clean the components

NOTICE

Improper cleaning!

Damage to the appliance.

uOnly use soft cleaning cloths and ph-neutral all-purpose

cleaners.

uDo not uses abrasive sponges or steel wool which may

cause scratches.

uDo not use any sharp or abrasive cleaning agents, nor

any that contain sand, chloride or acid.

Clean with a soft, clean cloth, lukewarm water and some

detergent:

- Door rack

- Shelf

- EasyFresh-Safe cover

- Drawer

Clean with a damp cloth:

- Retractable rails

Please note: The grease in the tracks is used for lubrica‐

tion and must not be removed!

Wash in the dishwasher up to 60 °C:

- Bottle rack

- Holder of the dividing shelf

- Egg rack

uTo disassemble components: see the relevant section.

uClean the components.

8.5.4 After cleaning

uWipe the appliance and the components dry.

uConnect and switch on the appliance.

The temperature is cold enough:

uPlace the food inside.

uRepeat cleaning regularly.

9 Customer help

9.1 Technical specifications

Temperature range

Cooling 2 °C to 9 °C

Maximum freezing quantity / 24 h

Freezer compart‐

ment*

See “Freezing capacity … /24 h” on

the serial tag*

Maximum size baking tray*

Width 466 mm

Depth 386 mm

Height 50 mm

Lighting

Class1Light source

This product contains one or more energy

efficiency class F light sources.

LED

1 The appliance may contain light sources with different

energy efficiency classes. The lowest energy efficiency class

is indicated.

9.2 Operating noises

The appliance makes different noises when it is on.

-At higher temperatures the appliance uses less energy

but works for longer. It is quieter.

-At lower temperatures the food is cooled faster. It is

louder.

Examples:

•Functions on (see 6.3 Functions)

•Fan running*

•Food recently added

•High ambient temperature

•Door open for a while

Noise Possible cause Type of noise

Bubbling and

splashing

Coolant flowing

into the cooling

circuit.

Normal operating

noise

Hissing Coolant sprays

into the cooling

circuit.

Normal operating

noise

Humming The appliance

is cooling. The

volume depends

on the cooling

output.

Normal operating

noise

Suction noises Soft-closing door

is being opened

and closed.

Normal operating

noise

Humming and

rustling*

The fan is

running.*

Normal operating

noise*

Clicking Components are

switched on and

off.

Normal switching

noise

Rattling or

humming

Valves or flaps are

working.

Normal switching

noise

Noise Possible

cause

Type of noise Lifting

Vibration Improper

installation

Defective

noise

Check the

installation.

Level the

appliance.

Customer help

18 * Depending on model and options

Noise Possible

cause

Type of noise Lifting

Rattling Components,

items inside

the appliance

Defective

noise

Secure

components.

Leave

enough

space

between the

items.

9.3 Technical fault

Your appliance is designed and built to ensure it works reli‐

ably and has a long service life. In the unlikely event that

a fault occurs during operation, please check whether it is

due to an operating error. If so, you will be charged for the

callout and repair costs even if it falls within the warranty

period.

You can fix the following faults yourself.

9.3.1 Appliance function

Defect Cause Remedy

The appliance is

not working.

→ The appliance is not switched on. uSwitch the appliance on.

→The power plug is not properly

plugged into the socket.

uCheck the power plug.

→There is something wrong with the

power outlet fuse.

uCheck the fuse.

→ Power cut uKeep the appliance closed.

uProtecting food: Lay freezer packs on top of the food or

use another freezer if the power is off for a prolonged

period.

uDo not re-freeze defrosted food,

→The appliance plug does not fit the

appliance properly.

uCheck the appliance plug.

Temperature is not

cold enough.

→The appliance door is not closed

properly.

uClose the appliance door.

→ Not enough ventilation. uKeep ventilation grille clear, and clean it.

→The ambient temperature is too

high.

uSolution: (see 1.4 Appliance range of use) .

→The appliance was opened too

many times or for too long.

uWait to see if the required temperature corrects itself.

If not, contact Customer Service (see 9.4 Customer Serv‐

ices) .

→ The temperature is set incorrectly. uTurn down the temperature and check after 24 hours.

→The appliance is too close to a heat

source (oven, radiator, etc).

uMove the appliance or the heat source.

→The appliance was not correctly

installed in the recess.

uCheck if the appliance was installed correctly and that

the door closes properly.

The door seal is

defective or needs

to be replaced for

another reason.

→The door seal can be replaced. It

can be replaced without the need

for special tools.

uContact Customer Services (see 9.4 Customer Services) .

The appliance

builds up too much

ice or condensa‐

tion.

→The door seal may have slipped out

of its groove.

uCheck that the door seal is well fitted in the groove.

9.3.2 Features

Defect Cause Remedy

The internal light

does not come on.

→ The appliance is not switched on. uSwitch the appliance on.

→The door was open for longer than

15 minutes.

uInterior lighting turns off automatically after approx. 15

min. with the door open.

→The LED interior light is faulty or

the lid is damaged.

uContact customer service (see 9.4 Customer Services) .

Customer help

* Depending on model and options 19

Defect Cause Remedy

The freezer

compartment

cannot be closed.*

→The lock is on when the door is

open.

uUse the handle again.

9.4 Customer Services

First check if you can fix the error yourself (see 9 Customer

help) . If you can't, contact Customer Services.

Please refer to the enclosed “Liebherr-Service” brochure for

the address.

WARNING

Unprofessional repair!

Injuries.

uHave any repairs and action - not expressly specified -

on the appliance and mains cable carried out by service

personnel only. (see 8 Maintenance)

uA damaged mains cable may only be replaced by the

manufacturer, the manufacturer’s Customer Service or a

similarly qualified person.

uIn the case of appliances with an IEC connector, the

change may be made by the customer.

9.4.1 Contact Customer Services

Make sure you have the following appliance data at the

ready:

qAppliance name (model and index)

qService no. (Service)

qSerial no. (S no.)

uLook up the appliance information on the display

(see Info) .

-or-

uReferring to appliance info on the nameplate

(see 9.5 Model plate) .

uNote down the appliance information.

uNotify Customer Services of the following: Give us the

appliance data.

wThis will help us to provide you with a faster, more accu‐

rate service.

uFollow any further instructions given by Customer Serv‐

ices.

9.5 Model plate

The model plate is behind the drawers on the inside of the

appliance.

Fig. 40

(1) Appliance description (3) Serial no.

(2) Service no.

uNote the data on the model plate.

10 Shutting down

uEmpty the appliance.

uTurn off the appliance .

uRemove mains connector.

uRemove appliance connector if required: Remove and

move from left to right at the same time.

uClean the appliance (see 8.5 Cleaning the appliance) .

uLeave the door open to avoid bad smells building up.

11 Disposal

11.1 Preparing appliance for disposal

Liebherr uses batteries in some of its appli‐

ances. In the EU, for environmental reasons,

legislation obliges the end user to remove

these batteries before disposing of old appli‐

ances. If your appliance contains batteries, a

corresponding notice is attached.

Lamps If you can remove the lamps yourself without

destroying them, also remove these before

disposal.

uTake the appliance out of operation.

uAppliances with batteries: remove the batteries. For

description, see Maintenance chapter.

uIf possible: remove lamps without destroying them.

11.2 Disposing of the appliance in an

environmentally friendly manner

The appliance still contains

valuable materials and must

be disposed of separately from

unsorted municipal waste.

Dispose of batteries separately

from the old appliance. To do

this, you can return the batteries

free of charge to retailers as

well as recycling centres and

collection centres for recyclable

materials.

Lamps Dispose of removed lamps

via the respective collection

systems.

For Germany: You can dispose of the appli‐

ance free of charge via the

class 1 collection containers

at the local recycling and

recyclable material collection

centres. When purchasing a new

fridge/freezer, if the sales area

> 400 m2, retailers will also take

back the old appliance free of

charge.

Shutting down

20 * Depending on model and options

Page is loading ...

Liebherr IK 3Z9fa1 Operating instructions

Brand: Liebherr

Model: IK 3Z9fa1

Category: Fridge-freezers

Type: Operating instructions

This manual is also suitable for

Download PDF

report

Liebherr IK 3Z9fa1 Operating instructions

This manual is also suitable for

Liebherr IK 3Z9fa1 Operating instructions

Related papers

Other documents