2. Blue-White
  3. C-1500N

Blue-White C-1500N User manual

  • Hello! I've reviewed the installation instructions for the Blue-White Star System C-1500N pump. This document details the steps for mounting the pump, connecting the suction tube, and ensuring proper flow direction. The guide focuses on using a mounting bracket and securing connections with hand-tightened nuts. I'm ready to answer any questions you might have about installing this pump.
  • How do I install the mounting bracket?
    How do I secure the pump to the tank?
    How do I attach the flow indicator assembly?
    How tight should the tube nuts be?
Installation Instructions
10/05/2011
STAR SYSTEM
Pump Installation
1. Install the mounting bracket to the back of the pump using one of the
black phillips head screws.
2. Tighten the other two black phillips head screws into the tank wall inserts.
3. Secure the pump to the tank by slipping the mounting bracket of the
pump over the screws on the tank wall.
Suction Tube Installation
1. Attach the bottom of the flow indicator assembly to the footvalve. Tighten
down the tube nut to the footvalve neck. Make sure the arrow and the
face of the flow indicator assembly are facing upward in the direction of
flow.
2. Attached the top of the flow indicator assembly to the bottom cartridge
valve of the pump head. Tighten the tube nut to the cartridge valve.
3. Make sure all tube nuts are securely tightened (hand tighten only).
5300 Business Drive
Huntington Beach, CA 92649
USA
Phone: FAX: 714-893-8529 714-894-9492
E mail: or [email protected] [email protected]
Website: www.blue-white.com
Blue-White
Industries, Ltd.
R
80000-213
Document # 379, 80000-213_Star System.cdr [ Rev: 0.9 ] Eff. Date 01/07/2015
/