JasonL QDLR2147.W.WT Operating instructions

Brand
JasonL
Model
QDLR2147.W.WT
Type
Operating instructions

This manual is also suitable for

JasonL QDLR2147.W.WT is a 2P Run workstation with a sturdy metal frame and a tabletop made of two separate pieces. The extendable beam allows for adjustment of the width between 1200mm and 1800mm, making it suitable for various setups and needs. Assembly requires two people and should be done following the instructions provided in the manual. The workstation can be used for various purposes, such as office work, crafting, or gaming. The sturdy construction ensures stability and durability, while the adjustable width provides flexibility in accommodating different setups and requirements.

JasonL QDLR2147.W.WT is a 2P Run workstation with a sturdy metal frame and a tabletop made of two separate pieces. The extendable beam allows for adjustment of the width between 1200mm and 1800mm, making it suitable for various setups and needs. Assembly requires two people and should be done following the instructions provided in the manual. The workstation can be used for various purposes, such as office work, crafting, or gaming. The sturdy construction ensures stability and durability, while the adjustable width provides flexibility in accommodating different setups and requirements.

ASSEMBLY INSTRUCTIONS
Quadro Loop
2P Run workstation
Sizes: 1200, 1400, 1600, 1800 mm
Page 1 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Loop
2P Run workstation
Sizes: 1200, 1400, 1600, 1800 mm
Table top x2
Leg Quadro x2
Leg Quadro Loop x2
Connector frame x1
Beam x2
Plastic bracket x8
A
B
C
D
E
F
Allen key x2K
M8x20MM CSK x4
M8x20MM Socket head x4
M6x20MM Socket head x8
M6x30MM Socket head x8
G
H
I
J
COMPONENTS
SCREWS
Page 2 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
E
F
G H I J
A
D
C
B
ASSEMBLY INSTRUCTIONS
Quadro Loop
2P Run workstation
Sizes: 1200, 1400, 1600, 1800 mm
Using Allen Key provided, attach M8x20MM Socket head (H)-
screw socket half way into leg for both legs (B) and into
Connector frame (D).Page 3 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
H
STEP 02
Using Allen Key provided, attach 2 plastic brackets per leg (F)
(as per picture above) using M6x20MM (I) Socket head screw.
Do the same with Connector frame (D). Connect Loop Legs (C)
to Bottom of Quadro Legs (B) by using 4 bolts per leg
I
STEP 01
ASSEMBLY INSTRUCTIONS
Quadro Loop
2P Run workstation
Sizes: 1200, 1400, 1600, 1800 mm
STEP 03
Adjust extendable beam (E) to desired
length using markers and secure beam
at that length using screws provided
Page 4 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Quadro Loop
2P Run workstation
Sizes: 1200, 1400, 1600, 1800 mm
Attach beam (E) to legs (B) and Connector frame (D)
using nut insert in legs. See point attached
Frame looks like this. Using Allen Key, attach beam (E) with Socket (G)
STEP 05
Page 5 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
G
G
G
G
STEP 04
TOP VIEW
ASSEMBLY INSTRUCTIONS
Quadro Loop
2P Run workstation
Sizes: 1200, 1400, 1600, 1800 mm
STEP 06
Page 6 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktops ontop of frame. Nut inserts in top will align with plastic
joiner brackets using M6x30MM (J) sockets attach tops to frame.
TABLE TOP
BOTTOM VIEW
J
ASSEMBLY INSTRUCTIONS
Quadro Loop
2P Run workstation
Sizes: 1200, 1400, 1600, 1800 mm
Page 7 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
TABLE TOPS
BOTTOM VIEW
The following nut inserts should be used for this speciļ¬c desk / workstation
nut insertnut insert nut insertnut insert
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

JasonL QDLR2147.W.WT Operating instructions

Brand
JasonL
Model
QDLR2147.W.WT
Type
Operating instructions
This manual is also suitable for

JasonL QDLR2147.W.WT is a 2P Run workstation with a sturdy metal frame and a tabletop made of two separate pieces. The extendable beam allows for adjustment of the width between 1200mm and 1800mm, making it suitable for various setups and needs. Assembly requires two people and should be done following the instructions provided in the manual. The workstation can be used for various purposes, such as office work, crafting, or gaming. The sturdy construction ensures stability and durability, while the adjustable width provides flexibility in accommodating different setups and requirements.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers