Western Backstop Assembly Kit #67442 (1000 & 2000) Parts List & Installation Instructions

I've reviewed the provided instructions for the Back Stop Assembly 67442 and Top Screen Kit 67439. The document outlines a three step process for assembling the screen lid and hinge to the screen, specifying part numbers and quantities for each piece of hardware. I am ready to answer any questions you may have about the assembly process or specific parts mentioned in the document.
What parts are included in the Back Stop Assembly 67442 kit?

How is the hinge attached to the screen lid?

How many steps are in the assembly process?

67442

1. Attach one of the hinge halves to the lid using two 1/4-20 x 1/2 bolts and locknuts.

Position the hinge half as illustrated above.

2. Attach the second hinge half to the one on the lid using two 1/4-20 x 1/2 bolts and

locknuts through the end flanges. Do not fully tighten.

3. Attach the assembled lid and hinge to the screen with two 1/4-20 x 1/2 bolts and

locknuts.

Back Stop Assembly – 67442

Ref # Part # Qty Description

1 P2079 1 Screen Lid

2 P2078 2 Screen Lid Hinge

3 90615 6 1/4-20 x 1/2" SHCS

4 91331 6 1/4-20 Locknut

BACKSTOP KIT

April 5, 1998

Doc. No. 68587

The company reserves the right under its product improvement policy to change construction or design details and furnish equipment when so

altered without reference to illustrations or specifications used herein.

Printed in USA

TOP SCREEN KIT

PART NUMBER 67439