Abus 100101009004 Datasheet

  • Hello! I've reviewed the datasheet for the ABUS Safety Lock 76/40. This document provides detailed information about its design, materials, and features, such as its corrosion resistance and various shackle options. I'm ready to answer any questions you might have about this product.
  • What material is the lock body made of?
    What is the temperature range for this lock?
    What kind of lubricant is used in the lock?
    What shackle options are available?
76/40
The New Dimension in Safety Locks
Page 1 of 2
Subject to technical alterations. No liability for mistakes and printing errors.
©ABUS | D 58292 Wetter | Germany
Design
Compact, lightweight, and superior corrosion and chemical resistance
8-pin precision cylinder with very high number of real key differs
9 different shackle options, with 6.5 or virtually 5 mm shackle diameter
Double bolt locking mechanism
Automatic locking for best usability combined with key retaining function for higher
safety
Precise and safe as well as torsion and breaking resistant key
All body sides and large key head for spacious engravings
Suitable for food industry: detectable and FDA-approved lubricant
Service: laser engraving, master key systems and KA padlocks
Available in: red, blue, yellow, orange, green, purple, brown, grey, white, black
Material
Strong, solid anodized aluminum body, protected by ABS cover
Shackles available with material/diameter:
steel 4.76 mm, steel with insulating PE plastic coating 6.5 mm, stainless steel
4.76 mm, non-conductive PA66 plastic 4.92 mm or flexible PU-sheathed stainless-
steel cable 4.76 mm
Brass cylinder and key, both nickel-plated
Lubricant FDA-approved (NSF H1 classification)
76/40
The New Dimension in Safety Locks
Page 2 of 2
Subject to technical alterations. No liability for mistakes and printing errors.
©ABUS | D 58292 Wetter | Germany
Dimensions in mm
40 mm 20 mm 38 or 4.76, 4.92 22 mm 91 or 128 mm
75 mm or 6.5 mm or flexible for CAB versions
or flexible see 1st page
for CAB
versions
Temperature Range
-20°C to +90°C (-4°F to +194°F)
Flame rating of ABS: UL94HB
Chemical Resistance
All approved chemicals listed are based on the manufacturer’s specified chemical
resistance chart for the plastic material only.
Chemical
Grade
Mineral lubricants
Resistant
Aliphatic hydrocarbons
Resistant
Aromatic hydrocarbons
Not resistant
Gasoline
Resistant
Weak mineral acids
Resistant
Strong mineral acids
Not resistant
Weak organic acids
Resistant
Strong organic acids
Conditionally resistant
Oxidizing acids
Not resistant
Weak bases
Resistant
Trichloroethylene
Not resistant
Perchloroethylene
Conditionally resistant
Acetone
Conditionally resistant
Alcohols
Conditionally resistant
Hot water (hydrolysis resistance)
Resistant
UV light and weather
Conditionally resistant
Legal Notes
ABUS products are sold with the understanding that the buyers will test them in actual use
and determine for themselves their adaptability to their intended uses.
/