Speakman CPT-9400-P Installation guide

Type
Installation guide

Speakman CPT-9400-P is a valve trim designed for use with Speakman valves. It features a sleek and modern design that will complement any bathroom décor. The trim is easy to install and comes with all the necessary hardware.

The Speakman CPT-9400-P is made from high-quality materials that are built to last. It is also backed by Speakman's lifetime warranty, so you can be sure that it will provide years of trouble-free use.

The Speakman CPT-9400-P is a great choice for anyone who is looking for a stylish and durable valve trim. It is easy to install and comes with all the necessary hardware.

Speakman CPT-9400-P is a valve trim designed for use with Speakman valves. It features a sleek and modern design that will complement any bathroom décor. The trim is easy to install and comes with all the necessary hardware.

The Speakman CPT-9400-P is made from high-quality materials that are built to last. It is also backed by Speakman's lifetime warranty, so you can be sure that it will provide years of trouble-free use.

The Speakman CPT-9400-P is a great choice for anyone who is looking for a stylish and durable valve trim. It is easy to install and comes with all the necessary hardware.

Instructions for Models:
CPT-9400-P
Need Help?
For additional assistance or service call:
SPEAKMAN Company
400 Anchor Mill Road
New Castle, DE 19720
PHONE: 800-537-2107
EMAIL: customerservice@speakmancompany.com
WEB: www.speakmancompany.com
92-CPT-9400-P-R1
What You Need To Know:
Tools:
Required:
*Phillips Screwdriver
Helpful:
*Tape Measure
Important Notes:
Be sure to read instructions thoroughly before
beginning installation. Do not overtighten any
connections or damage may occur.
Be sure to have properly adjusted the
Temperature Limiting Stop (TLS) as per the
Valve Installation Instructions before installing
Valve Trim.
Safety Tips:
Cover your drain to prevent loss of parts.
Maintenance:
Your new Valve Trim is designed for years
of trouble-free performance. Keep it looking
new by cleaning it periodically with a soft cloth.
Avoid abrasive cleaners, steel wool, and harsh
chemicals as these will dull the finish and void
your warranty.
Clean wall surface. Place Mounting Base
on to valve, align mounting holes, and secure
with screws.
*IMPORTANT*
There are 2 Connectors included to allow for
both Shallow and Deep mount applications.
Please select Connector appropriate for your
installation.
Confirm that the valve is in the “OFF” position.
Place appropriate Connector on spindle of
valve making sure to orient the Connector so that
one set of splines are in a perfectly vertical
position.
When installed correctly the Connector
should protrude from the Mounting Base
inbetween 5/16” and 1”. Secure with Screw.
Place Escutcheon on Mounting Base. Take care
to align Diverter Handle Assembly A with
Diverter Spindle.
Align Handle Assembly with Connector and
Escutcheon. Keep Handle A in a stationary
vertical position as you thread Handle Hub B
on to Mounting Base. Tighten until snug.
2
1
For Deep Mount
Application
For Shallow Mount
Application
3
4
5/16"-1"
3
5
5A
RPG05-0874 ②③④
RPG10-0359-(PC,BN)
RPG04-0876-(PC,BN)
1
4
6
3
2
7"
7"
178mm
178mm
7"
7"
178mm
178mm
2"
2"
51mm
51mm
31
2
"
90mm
90mm
5
  • Page 1 1
  • Page 2 2

Speakman CPT-9400-P Installation guide

Type
Installation guide

Speakman CPT-9400-P is a valve trim designed for use with Speakman valves. It features a sleek and modern design that will complement any bathroom décor. The trim is easy to install and comes with all the necessary hardware.

The Speakman CPT-9400-P is made from high-quality materials that are built to last. It is also backed by Speakman's lifetime warranty, so you can be sure that it will provide years of trouble-free use.

The Speakman CPT-9400-P is a great choice for anyone who is looking for a stylish and durable valve trim. It is easy to install and comes with all the necessary hardware.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI