2. Centrotherm Eco Systems
  3. ISLPT0303

Centrotherm Eco Systems ISLPT0303 Installation guide

  • Hello! I've reviewed the provided mounting instructions for the Centrotherm ISLPT0202 and ISLPT0303 Low Profile Wall Termination kits. This document details the steps for installation, including cutting holes, mounting wall plates, and attaching vent lengths. I'm here to help answer any questions you might have about the process or components mentioned.
  • What size hole saw is needed for ISLPT0202?
    What size hole saw is needed for ISLPT0303?
    What should be ensured when mounting the exterior wall plate?
    Are vent lengths included in the kit?
SINGLE WALL
Contents of the kit
Installation
Installation
Mounting instructions for kit | Low Profile Wall Termination
ISLPT0202 / ISLPT0303
Centrotherm Eco Systems, LLC • 75 Champlain Street • Albany, NY 12204 • 877 434 3432 • [email protected] • www.centrotherm.us.com
Use hole saw to cut holes (2½" for
ISLPT0202; 3 ¼" for ISLPT0303) in
exterior structure 4 ¾" apart center
to center. Locate terminator per
local code.
Mount Exterior Wall Plate (2) to structure. Ensure raised cone of
Exterior Wall Plate is on exhaust side (The Exterior Wall Plate may
rotate 180° to accomplish this). Install Interior Wall Plate (1).
Install Vent Lengths (sold
separately). Caulk around
Exterior Wall Plate (2).
Screw through Air Intake
Vent Length and Exterior
Wall Plate (2) securing vent
length.
Use a 2 3⁄8"(for ISLPT0202) or 31⁄8"
(for ISLPT0303) diameter hole
saw to cut out exhaust side of
Outside Cover (3).
Mount Outside Cover (3) with
hole lining up with raised side
of Exterior Wall Plate (2). Install
Bird Screen (4).
1
2
3
4
5
Interior Wall
Plate
Exterior Wall
Plate
Birdscreen
Vent lengths sold separately.
Outside Cover
180°
air intake
exhaust
12
3
4
/