Operation Manual
Getting Started
Remove clear protective wrap from around candle and discard
Battery Installation
Install 2 C batteries (not included) in battery compartment. Be sure to follow the +/- polarity
shown in the battery compartment.
Lighting Control
Slide the switch location for your desired lighting option
4 – Four Hour Timer: First make sure the switch is started in the “O” position (off position) then
slide the switch to “4”. The candle light will remain on for a period of four hours from when it
was turned on and then automatically turn off. The light will then turn on again twenty-four
hours after it was first turned on. This sequence will continue until the switch is moved to
one of the other positions.
O – Off
8 – Eight Hour Timer: First make sure the switch is started in the “O” position (off position)
then slide the switch to “8”. The candle light will remain on for a period of eight hours from
when it was turned on and then automatically turn off. The light will then turn on again
twenty-four hours after it was first turned on. This sequence will continue until the switch is
moved to one of the other positions.
C – First make sure the switch is started in the “O” (Off position) then slide the switch to the
“C”. The candle light will remain on until switched off or switched back to a timer position.
2