Goldstar M1200 Installation guide

Type
Installation guide

This manual is also suitable for

Goldstar M1200 is an air conditioner that can be installed in standard double hung windows with actual opening widths from 27" to 39". The top and bottom window sash must open sufficiently to allow a clear vertical opening of 16" from the bottom of the upper sash to the window stool.

When used with the drain pipe, the unit can be installed up to 60" above the floor level and tilted slightly to the outside for proper water drainage. The unit must be installed securely to prevent vibration and noise. All side louvers of the cabinet must remain exposed to the outside of the structure to ensure proper heat radiation of the condenser.

Goldstar M1200 is an air conditioner that can be installed in standard double hung windows with actual opening widths from 27" to 39". The top and bottom window sash must open sufficiently to allow a clear vertical opening of 16" from the bottom of the upper sash to the window stool.

When used with the drain pipe, the unit can be installed up to 60" above the floor level and tilted slightly to the outside for proper water drainage. The unit must be installed securely to prevent vibration and noise. All side louvers of the cabinet must remain exposed to the outside of the structure to ensure proper heat radiation of the condenser.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Goldstar M1200 Installation guide

Type
Installation guide
This manual is also suitable for

Goldstar M1200 is an air conditioner that can be installed in standard double hung windows with actual opening widths from 27" to 39". The top and bottom window sash must open sufficiently to allow a clear vertical opening of 16" from the bottom of the upper sash to the window stool.

When used with the drain pipe, the unit can be installed up to 60" above the floor level and tilted slightly to the outside for proper water drainage. The unit must be installed securely to prevent vibration and noise. All side louvers of the cabinet must remain exposed to the outside of the structure to ensure proper heat radiation of the condenser.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI