USAGE
Powerful bulb duster forcibly blows away dust, lint, and dirt. It provides high pressure, pinpoint jets of air exactly where desired. Varying the “squeeze”
provides for controlled delivery.
ONE-WAY INLET VALVE
One-way inlet valve at the top prevents air from being drawn back through the tip.
NON-CONDUCTIVE TIP
The clear non-conductive plastic sleeve-tip prevents scratches and permits cleaning optical lenses, slides, circuit boards, and cuvets. It’s ideal for delicate,
difficult-to-clean, and inaccessible equipment. Do not remove the clear non-conductive tip.
Warranty, Service, or Recalibration
For warranty, service, or recalibration, contact:
CONTROL COMPANY
4455 Rex Road
Friendswood, Texas 77546 USA
Ph. 281-482-1714 Fax 281-482-9448
E-mail [email protected]
www.control3.com
Control Company is ISO 9001 Quality-Certified by DNV and ISO 17025 accredited as a Calibration
Laboratory by A2LA.
Traceable
®
is a registered trademark of
Control Company
©2009 Control Company. 92-3119-00 Rev. 1 031709
DUST-IT™ BLOWER INSTRUCTIONS
-
1
