2. ESAB
  3. Hi-Flow Manifold Kits

ESAB Hi-Flow Manifold Kits Assembly Instruction

  • Hello! I am an AI chatbot trained to assist you with the ESAB Hi-Flow Manifold Kits Assembly Instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Suggested Assembly for
F-15-622
July, 2000
Hi-Flow Manifold Kits
Part No’s - 2226712 & 2226713
These INSTRUCTIONS are for experienced operators. If you are not fully familiar with the principles of operation and
safe practices for oxy-fuel gas equipment, we urge you to read our booklet "Precautions and Safe Practices for Gas
Welding, Cutting and Heating," Form 2035. Do NOT permit untrained persons to install, operate, or maintain this
equipment. Do NOT attempt to install or operate this equipment until you have read and fully understand these Instruc-
tions. If you do not fully understand these Instructions, contact your supplier for further information.
Valve, Needle, B Size Oxy - 3395
Cutting Oxy.
Outlet “B” Size
Connection “B” Size, 1/2 MPT, FG, Brass
- 8693
Nipple, Hex, 3/4 NPT X 3/4 NPT - 2226716
Valve, Shutoff - 639674
Connection, C-Size
3/4 MPT, Oxy, Brass
- 19Z14
Valve, Station, Type, Ball, 1/2 NPT - 8951036
Nipple, Hex, 1/2 NPT X 1/2 NPT
Block, Manifold, Hi-Flow, Aluminum - 2223796
4- Screw, Cap, Hex Hd, 5/16-18, CD/ZN Plt, Stl, 3/4 Lg - 61341361
4- Washer, Lock, Spring, 5/16 Med, CD/ZN, Plt, Stl - 64302110
Bracket, Mounting, Hi-Flow
Manifold - 2223797
Valve, Needle,
B Size FG - 3396
Adaptor, Hex, Male/
Female, 3/4 NPT X
1/2 NPT - 2227912
Preheat Fuel Gas
Outlet “B” Size
Oxygen Inlet
“C” Size
Preheat Oxy.
Outlet “B” Size
Elbow, Adaptor, 90
o
, B-Size-EXT/B-Size-INT, Oxy, Brass -18X55
Connection, B-Size, 1/4 MPT, Oxy, Brass - 3389
Connection “B” Size, 1/2 MPT
FG, Brass - 8693
Gauge, Pressure, 2-1/2”,
30 PSI, Oxy, 6 O’ Clock
Red - 999437
* See Note
Connection “B” Size, 1/2 MPT,
Oxy, Brass - 8696
Valve, Ball, Mini 1/2 NPT,
Male X Female - 2227913
* NOTE: For Torches with “C” Size Cutting Oxy, Use Item 19
Fuel Gas Inlet
“B” Size
The arrangement below is for one torch operation.
Manifold and inlet fittings are sized for two torches if
neccessary.
Use additional pieces of items 17 & 18 to mount this
assembly to machine carriage.
Gauge, Pressure, 2-1/2”, 200 PSI, Oxy, 6 O’ Clock Green
- 999440
2 Elbow, Street, Hex, 1/4 NPT X 1/4 NPT - 2227915
Block, Manifold, Hi-Flow, Brass - 2225427
/