Lumec SoleCity Linear Wallwash (ULFW100) Install Instructions

Brand: Lumec

Model: SoleCity Linear Wallwash (ULFW100)

Type: Install Instructions

Lumec SoleCity Linear Wallwash (ULFW100) offers precise optical control and uniform light distribution, suitable for a variety of applications. Its adjustable head allows for flexible orientation, while the durable construction ensures longevity even in wet locations. Installation is simplified with a junction box below the base, and the power supply cable should not be removed or altered.

Lumec SoleCity Linear Wallwash (ULFW100) offers precise optical control and uniform light distribution, suitable for a variety of applications. Its adjustable head allows for flexible orientation, while the durable construction ensures longevity even in wet locations. Installation is simplified with a junction box below the base, and the power supply cable should not be removed or altered.

ILC

OPTION

1

1

2

3

4

PASSER LE CÂBLE D'ALIMENTATION À CET ENDROIT

INSTALL THE POWER SUPPLY CABLE AT THIS PLACE

RETIRER LA VIS ET LA TÔLE POUR l'ACCÈS A LA BOITE DE JONCTION

REMETTRE LES PIÈCES AMOVIBLE EN PLACE APRÈS L'INSTALLATION

REMOVE THE SCREW AND PLATE FOR THE JUNCTION BOX ACCESS

REINSTALL REMOVABLE PARTS AFTER INSTALLATION

LIRE CE DOCUMENT ATTENTIVEMENT AVANT D'INSTALLER LE LUMINAIRE

ATTENTION: COUPER L'ALIMENTATION ÉLECTRIQUE AVANT D'OUVRIR LE LUMINAIRE

READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING THIS FIXTURE

CAUTION: THE ELECTRICAL POWER MUST BE DISCONNECTED BEFORE OPENING THE FIXTURE

WARNING

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE

CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED

THE FLEXIBLE CORD SHALL BE CONNECTED TO AN OUTLET BOX SUITABLE FOR WET LOCATIONS, WITH A LISTED WATERTIGHT CORD

GRIP SUITABLE FOR THE SIZE OF CORD AND TRADE SIZE OPENING OF JUNCTION BOX. SUPPLIED BY OTHERS.

AVERTISSEMENT CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT

BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS

LE CORDON FLEXIBLE DOIT ETRE CONNECTÉ À UNE BOÎTE DE JONCTION POUR EMPLACEMENTS MOUILLÉS, AVEC UN SERRE-CÂBLE

HOMOLOGUÉ ÉTANCHE À L’EAU ET COMPATIBLE À L’OUVERTURE STANDARD DE LA BOÎTE DE JONCTION. FOURNIS PAR D'AUTRES.

EFFECTUER LES BRANCHEMENTS ÉLECTRIQUES

1.

DESSERRER LES VIS PRESSION

2.

AJUSTER L'ORIENTATION DU LUMINAIRE

3.

VISSER LES VIS PRESSION À 75 lbs.in.

4.

NE PAS RETIRER OU MODIFIER LE CÂBLE D'ALIMENTATION

DO NOT REMOVE OR ALTER THE POWER SUPPLY CABLE

CONNECT ELECTRICAL CIRCUIT

1.

LOOSEN SET SCREWS

2.

ORIENT THE FIXTURE

3.

TIGHTEN THE SETSCREWS AT 75 lbs.in.

4.

POUR INSTALLATION MURAL AVEC BOITE DE JONCTION SOUSLA BASE/

FOR WALL INSTALLATION WITH JUNCTION BOX BELOW THE BASE

1 DE 1

DESIGNER:

DATE:

DATE:

FEUILLE/

SHEET:

TITRE/TITLE:

NO DESSIN/

DRWING #:

AS1 LUM ULFW100 LED MEC AL LEDGINE

5013252101

09-17-13

JS

VÉRIF./INSPEC.:

1

Lumec SoleCity Linear Wallwash (ULFW100) Install Instructions

Brand: Lumec

Model: SoleCity Linear Wallwash (ULFW100)

Type: Install Instructions

Lumec SoleCity Linear Wallwash (ULFW100) offers precise optical control and uniform light distribution, suitable for a variety of applications. Its adjustable head allows for flexible orientation, while the durable construction ensures longevity even in wet locations. Installation is simplified with a junction box below the base, and the power supply cable should not be removed or altered.

Download PDF

in other languages

français: Lumec SoleCity Linear Wallwash (ULFW100)

Other documents