Gamber-Johnson CLARK Roll Formed Pillar Bracket Installation guide

CLARK Roll Formed Pillar Bracket
Gamber-Johnson
Brand
Gamber-Johnson
Model
CLARK Roll Formed Pillar Bracket
Type
Installation guide

This manual is also suitable for

Gamber-Johnson CLARK Roll Formed Pillar Bracket is designed to attach various attachments, such as motion attachments, to the 50mm roll formed overhead guard leg on a Clark forklift, providing a secure and stable mounting solution for a wide range of applications. It features a sturdy construction with 3/8" diameter hex bolts and carriage bolts for a strong hold, ensuring the safety and reliability of your mounted equipment. The bracket is easy to install with the included hardware and can be used in various industrial and commercial settings where forklifts are utilized.

Gamber-Johnson CLARK Roll Formed Pillar Bracket is designed to attach various attachments, such as motion attachments, to the 50mm roll formed overhead guard leg on a Clark forklift, providing a secure and stable mounting solution for a wide range of applications. It features a sturdy construction with 3/8" diameter hex bolts and carriage bolts for a strong hold, ensuring the safety and reliability of your mounted equipment. The bracket is easy to install with the included hardware and can be used in various industrial and commercial settings where forklifts are utilized.

Revision
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form Product
INSTALLATION INSTRUCTIONS
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
INST-986
7160-1542
Rev A
PS-001
MOUNT, ROLL FORM, CLARK 50MM
Printing Spec:
© Copyright 2020 Gamber-Johnson, LLC
7160-1542 is a set of mounting brackets designed to attach to the 50mm roll formed
overhead guard leg on a Clark forklift. The brackets are held in place with 3/8"
diameter hex bolts and carriage bolts.
1. Attach the motion atttachment (sold separatelly, dual clam shell 7160-0420 is
shown below) to the front plate with the 5/16" flat washers, split lock washers, and
hex nuts provided in hardware bag 7120-0575.
2. Clamp the front and back plate to the roll formed overhead guard leg with the
3/8" x 2" hex bolts and lock washers, and the 3/8" x 3-1/2" carriage bolts (run
through the motion attachment) and 3/8 serrated flange lock nuts provided in
hardware bag 7120-0575.
lock washer, &
hex nut
guard leg
Back plate
flange lock nut
50mm ovhead
Front bracket
3/8 x 2" hex
bolt & lock washer
attachment
Motion
5/16" flat washer,
3/8" serrated
3/8" carriage bolts
  • Page 1 1

Gamber-Johnson CLARK Roll Formed Pillar Bracket Installation guide

CLARK Roll Formed Pillar Bracket
Gamber-Johnson
Brand
Gamber-Johnson
Model
CLARK Roll Formed Pillar Bracket
Type
Installation guide
This manual is also suitable for

Gamber-Johnson CLARK Roll Formed Pillar Bracket is designed to attach various attachments, such as motion attachments, to the 50mm roll formed overhead guard leg on a Clark forklift, providing a secure and stable mounting solution for a wide range of applications. It features a sturdy construction with 3/8" diameter hex bolts and carriage bolts for a strong hold, ensuring the safety and reliability of your mounted equipment. The bracket is easy to install with the included hardware and can be used in various industrial and commercial settings where forklifts are utilized.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers