2. Computers & electronics
  3. Software
  4. Dell
  5. MONITOR
MONITOR

Dell MONITOR Reference guide

  • Hello! I am an AI chatbot trained to assist you with the Dell MONITOR Reference guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Dell Command | Monitor
Version 10.5 Reference Guide
May 2021
Rev. A00
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid
the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other
trademarks may be trademarks of their respective owners.
Chapter 1: Introduction for Dell Command | Monitor 10.5.............................................................. 7
Chapter 2: Dell Command | Monitor 10.5 Namespaces................................................................... 8
Chapter 3: Profiles for Dell Command | Monitor 10.5.....................................................................9
Chapter 4: Classes for Dell Command | Monitor 10.5.................................................................... 11
Chapter 5: Dell Command | Monitor 10.5 classes and properties.................................................. 12
Classes supported for systems running Linux.............................................................................................................12
Classes supported for systems running Windows......................................................................................................12
DCIM_AlertIndication.................................................................................................................................................. 12
DCIM_ApplicationProxySetting ............................................................................................................................... 18
DCIM_BaseMetricDefinition...................................................................................................................................... 19
DCIM_Card.................................................................................................................................................................... 21
DCIM_Chassis.............................................................................................................................................................. 22
DCIM_Chip....................................................................................................................................................................26
DCIM_DesktopMonitor.............................................................................................................................................. 27
DCIM_DHCPProtocolEndpoint................................................................................................................................ 37
DCIM_EthernetPort....................................................................................................................................................44
DCIM_FlatPanel........................................................................................................................................................... 47
DCIM_IPProtocolEndpoint........................................................................................................................................ 48
DCIM_ImprovementProgramConsent.................................................................................................................... 53
DCIM_ControllerView.................................................................................................................................................54
DCIM_PhysicalDiskView............................................................................................................................................ 54
DCIM_VirtualDiskView............................................................................................................................................... 55
DCIM_PhysicalMemory..............................................................................................................................................57
DCIM_PhysicalPackage............................................................................................................................................. 59
DCIM_ParallelPort....................................................................................................................................................... 61
DCIM_RemoteServiceAccessPoint.........................................................................................................................64
DCIM_Slot.....................................................................................................................................................................68
DCIM_SerialPort.......................................................................................................................................................... 72
DCIM_USBPort............................................................................................................................................................78
DCIM_Memory..............................................................................................................................................................81
DCIM_PCIDevice......................................................................................................................................................... 87
DCIM_DisplayController.............................................................................................................................................89
DCIM_Fan..................................................................................................................................................................... 92
DCIM_IndicatorLED.................................................................................................................................................... 95
DCIM_PowerSupply....................................................................................................................................................98
DCIM_Battery............................................................................................................................................................. 101
DCIM_Processor........................................................................................................................................................106
DCIM_NumericSensor...............................................................................................................................................115
DCIM_Sensor..............................................................................................................................................................122
DCIM_DeviceBay....................................................................................................................................................... 127
Contents
Contents 3
DCIM_VideoHead...................................................................................................................................................... 130
DCIM_Button..............................................................................................................................................................133
DCIM_LCDPanel........................................................................................................................................................ 135
DCIM_NetworkPortConfigurationService........................................................................................................... 137
DCIM_TimeService....................................................................................................................................................139
DCIM_AccountManagementService.....................................................................................................................142
DCIM_RoleBasedAuthorizationService................................................................................................................ 144
DCIM_PowerManagementService........................................................................................................................ 146
DCIM_BootService....................................................................................................................................................149
DCIM_IPConfigurationService................................................................................................................................ 151
DCIM_PowerUtilizationManagementService......................................................................................................152
DCIM_BIOSService................................................................................................................................................... 156
DCIM_SoftwareInstallationService....................................................................................................................... 158
DCIM_ComputerSystem...........................................................................................................................................161
DCIM_RecordLog...................................................................................................................................................... 166
DCIM_OperatingSystem.......................................................................................................................................... 170
DCIM_SoftwareIdentity........................................................................................................................................... 175
DCIM_BIOSElement.................................................................................................................................................. 176
DCIM_ConcreteJob...................................................................................................................................................178
DCIM_BootSourceSetting....................................................................................................................................... 179
DCIM_BootConfigSetting........................................................................................................................................180
DCIM_IPAssignmentSettingData............................................................................................................................181
DCIM_PowerAllocationSettingData...................................................................................................................... 182
DCIM_AssetAcquisition............................................................................................................................................ 184
DCIM_AssetExtendedWarrantyInformation........................................................................................................184
DCIM_AssetOwnerInformation.............................................................................................................................. 185
DCIM_AssetSupportInformation............................................................................................................................186
DCIM_AssetWarrantyInformation..........................................................................................................................187
DCIM_AssetSystemInformation.............................................................................................................................188
DCIM_ThermalInformation ..................................................................................................................................... 188
DCIM_AMTSettings.................................................................................................................................................. 189
DCIM_ASFSettings................................................................................................................................................... 190
DCIM_VProSettings..................................................................................................................................................190
DCIM_AlertIndicationSettingData......................................................................................................................... 192
DCIM_HDDAlertIndicationSettingData.................................................................................................................196
DCIM_BaseMetricValue........................................................................................................................................... 196
DCIM_LogEntry..........................................................................................................................................................197
DCIM_IndicatorLEDCapabilities............................................................................................................................. 198
DCIM_ProcessorCapabilities..................................................................................................................................200
DCIM_AccountManagementCapabilities.............................................................................................................200
DCIM_BootServiceCapabilities...............................................................................................................................201
DCIM_PlatformWatchdogServiceCapabilities................................................................................................... 202
DCIM_DHCPCapabilities......................................................................................................................................... 203
DCIM_PowerUtilizationManagementCapabilities..............................................................................................203
DCIM_EnabledLogicalElementCapabilities..........................................................................................................204
DCIM_ButtonCapabilities........................................................................................................................................205
DCIM_LCDPanelCapabilities.................................................................................................................................. 206
DCIM_PowerManagement..................................................................................................................................... 206
DCIM_PhysicalAssetCapabilities........................................................................................................................... 208
DCIM_RoleBasedManagementCapabilities.........................................................................................................208
4
Contents
DCIM_AllocationCapabilities.................................................................................................................................. 209
DCIM_BIOSServiceCapabilities.............................................................................................................................. 210
DCIM_SoftwareInstallationServiceCapabilities................................................................................................... 211
DCIM_ConcreteCollection.......................................................................................................................................212
DCIM_RedundancySet............................................................................................................................................. 213
DCIM_Role.................................................................................................................................................................. 214
DCIM_IndicationSettingCollection.........................................................................................................................215
DCIM_ConfigurationCapacity.................................................................................................................................216
DCIM_Location...........................................................................................................................................................217
DCIM_BIOSEnumeration..........................................................................................................................................218
DCIM_BIOSPassword...............................................................................................................................................219
DCIM_BIOSString..................................................................................................................................................... 220
DCIM_MemoryError..................................................................................................................................................221
DCIM_IdentityContext............................................................................................................................................. 221
DCIM_OrderedComponent.....................................................................................................................................222
DCIM_Container........................................................................................................................................................222
DCIM_ConcreteComponent...................................................................................................................................222
DCIM_SystemDevice............................................................................................................................................... 223
DCIM_AccountOnSystem....................................................................................................................................... 223
DCIM_InstalledOS.....................................................................................................................................................223
DCIM_SystemBIOS...................................................................................................................................................223
DCIM_SystemComponent...................................................................................................................................... 223
DCIM_SettingsDefineCapabilities......................................................................................................................... 223
DCIM_DeviceSAPImplementation.........................................................................................................................225
DCIM_HostedAccessPoint..................................................................................................................................... 225
DCIM_HostedCollection..........................................................................................................................................225
DCIM_HostedService.............................................................................................................................................. 225
DCIM_VideoHeadOnController..............................................................................................................................225
DCIM_SAPSAPDependency...................................................................................................................................226
DCIM_ReferencedProfile........................................................................................................................................ 226
DCIM_MetricDefForME.......................................................................................................................................... 226
DCIM_MetricForME................................................................................................................................................. 226
DCIM_MetricInstance.............................................................................................................................................. 227
DCIM_ElementInConnector....................................................................................................................................227
DCIM_Docked............................................................................................................................................................ 227
DCIM_ConcreteDependency..................................................................................................................................227
DCIM_Realizes...........................................................................................................................................................227
DCIM_ComputerSystemPackage..........................................................................................................................227
DCIM_RunningOS..................................................................................................................................................... 228
DCIM_UseOfLog....................................................................................................................................................... 228
DCIM_AssociatedIndicatorLED..............................................................................................................................228
DCIM_AssociatedCacheMemory.......................................................................................................................... 228
DCIM_AssociatedSensor.........................................................................................................................................229
DCIM_RemoteAccessAvailableToElement..........................................................................................................229
DCIM_ServiceServiceDependency....................................................................................................................... 230
DCIM_DeviceConnection........................................................................................................................................230
DCIM_ElementSoftwareIdentity........................................................................................................................... 230
DCIM_ElementCapabilities..................................................................................................................................... 230
DCIM_ElementSettingData.................................................................................................................................... 230
DCIM_OrderedMemberOfCollection....................................................................................................................232
Contents
5
DCIM_MemberOfCollection................................................................................................................................... 233
DCIM_OwningCollectionElement.......................................................................................................................... 233
DCIM_ElementConformsToProfile....................................................................................................................... 233
DCIM_RoleLimitedToTarget...................................................................................................................................233
DCIM_ElementCapacity.......................................................................................................................................... 233
DCIM_ServiceAffectsElement............................................................................................................................... 234
DCIM_AssociatedPowerManagementService................................................................................................... 235
DCIM_ServiceAvailableToElement........................................................................................................................236
DCIM_LogManagesRecord.....................................................................................................................................236
DCIM_InstalledSoftwareIdentity........................................................................................................................... 236
DCIM_ConcreteIdentity...........................................................................................................................................237
DCIM_SMARTAttributeInfo....................................................................................................................................237
DCIM_SettingsDefineState.................................................................................................................................... 238
DCIM_ElementLocation...........................................................................................................................................238
DCIM_CredentialContext........................................................................................................................................238
DCIM_OwningJobElement......................................................................................................................................238
Chapter 6: BIOS settings supported in Dell Command | Monitor 10.5.........................................239
Chapter 7: Alerts in Dell Command | Monitor 10.5 ..................................................................... 312
Chapter 8: Sample scripts for Dell Command | Monitor 10.5.......................................................315
6
Contents
Introduction for Dell Command | Monitor 10.5
The Dell Command | Monitor software application enables IT administrators to easily manage fleet inventory, monitor system
health, modify BIOS settings, and remotely collect information for deployed Dell client systems.
Active system health state monitoring can help reduce the total cost of system ownership and is part of a holistic approach to
managing all networked devices.
Dell Command | Monitor is designed for Dell Enterprise client systems, Dell IoT Gateway systems, and for
Dell Embedded PCs. For more information about supported Dell systems see Release notes available at dell.com/
dellclientcommandsuitemanuals.
NOTE: Dell Command | Monitor was formerly Dell OpenManage Client Instrumentation (OMCI). After the OMCI version
8.2.1, OMCI is rebranded as Dell Command | Monitor.
NOTE: All classes or properties that are listed in the reference guide may not be supported on all Dell systems.
1
Introduction for Dell Command | Monitor 10.5 7
Dell Command | Monitor 10.5 Namespaces
Namespaces are standards-based with implementation of multiple profiles as defined by the Distributed Management Task Force
(DMTF). The following namespaces are available in Dell Command | Monitor:
● root\dcim\sysman - The CIM schema for this namespace is 2.17 and provides all the functionality of Dell Command
| Monitor for Windows. Dell Command | Monitor for Windows, uses DASH-compliant namespace conventions. A DASH-
compliant implementation uses a CIM-based data model for representing managed resources and services.
● root/dcim/sysman - The CIM schema for this namespace is 2.32.0 and provides all the functionality of Dell Command |
Monitor for Linux.
2
8 Dell Command | Monitor 10.5 Namespaces
Profiles for Dell Command | Monitor 10.5
Dell Command | Monitor running on Windows operating system uses industry standard profiles to represent the management
data provided. These profiles are implemented either as defined or sometimes have Dell-specific extensions.
The following is a list of profiles that are implemented for Dell Command | Monitor for Windows:
Nonextended profiles:
● Base Metrics—The Base Metrics Profile is a component profile that defines the minimum object model that is must provide
dynamic metrics that are associated to existing managed elements and related associations.
● Battery—The Battery Profile extends the management capabilities of referencing profiles by adding the capability to
represent batteries for manageability. The battery as a logical device is modeled as referencing the battery physical
package for physical asset information, the sensor for sensor-reading information, and the profile registration for the schema
implementation version information.
● BIOS Management—The BIOS Management Profile extends the management capabilities of referencing profiles by adding
the capability to represent and configure BIOS settings, such as a Network Controller or IDE Controller. The individual BIOS
settings’ relationship with a respective device is also described.
● Boot Control—The Boot Control Profile describes the classes, associations, properties, and methods that are used to
manage the boot control configurations of a physical or virtual computer system.
● CPU—The CPU Profile extends the management capability of referencing profiles by adding the capability to represent
CPUs or processors in a managed system . CPU cache memory and associations with CPU physical aspects, and profile
implementation version information, are modeled in this profile.
● Fan—The Fan Profile extends the management capabilities of referencing profiles by adding the capability to represent fans
for manageability and describe fans in a redundant configuration. The fan as a logical device is modeled as referencing the
fan physical package for physical asset information, a sensor for sensor reading information.
● Indications—The Indications Profile defines the CIM elements that are used to subscribe for indications of unsolicited
events, to advertise the possible indications, and to represent indications that are used to report events in a managed
system.
● IP Interface—The IP Interface Profile extends the management capability of referencing profiles by adding the capability to
represent an IP interface of a managed system.
● Operating system Status—The operating system Status Profile extends the management capabilities of referencing profiles
by adding the capability to perform basic management of operating systems installed on a system.
● PCI Device—The PCI Device Profile extends the management capabilities of referencing profiles by adding the capability to
represent PCI devices for manageability, including PCI, PCI-X, PCI Express, bridge, and switch devices.
● Physical Asset—The Physical Asset Profile extends the management capability of the referencing profiles by adding the
capability to describe the physical aspects of logical elements that the implementation is instantiating.
● Power State Management—The Power State Management Profile describes the classes, associations, properties, and
methods that are used to manage the power of a computer system.
● Profile Registration—The Profile Registration extends the management capability of the referencing profiles by adding
the capability to describe the registration and versioning of CIM profiles that are implemented by CIM-based system and
component management instrumentations.
● RecordLog—The Record Log Profile is an autonomous profile that provides the management capabilities to represent logs of
a managed system element.
● Sensors—The Sensors Profile extends the management capabilities of referencing profiles by adding the capability to
represent sensors.
● Software Inventory—The Software Inventory Profile describes the CIM schema elements that are required to provide an
inventory of installed BIOS, firmware, drivers, and related software in a managed system.
● Device Tray—The Device Tray Profile is a component profile for modeling a device tray of a modular system.
● Software Update—The Software Update Profile describes the classes, associations, properties, and methods used to
support the installation and update of BIOS, firmware, drivers, and related software on a managed element within a managed
system.
● Base Desktop and Mobile—The Base Desktop and Mobile Profile is an autonomous profile that defines the classes that are
used to describe monolithic desktop or mobile computer hardware and related software. The scope of this profile is limited to
monolithic desktop or mobile system hardware and related software that are directly realized in physical components.
Extended profiles:
3
Profiles for Dell Command | Monitor 10.5 9
● Asset Profile
● Ethernet Port Profile
● Event Configuration
● Serial Port
● Service processor Profile
● System Memory
● USB
● Docking Station
● Human Computer Interaction
● Display Controller
For more information about Profiles, see the website - dmtf.org/standards/profiles.
10 Profiles for Dell Command | Monitor 10.5
Classes for Dell Command | Monitor 10.5
Classes and properties are defined by the CIM schema. The profiles identify mandatory classes and properties to implement the
profile.
For more information about CIM schema, classes and properties, see to the website - dmtf.org/standards/cim
4
Classes for Dell Command | Monitor 10.5 11
Dell Command | Monitor 10.5 classes and
properties
Dell Command | Monitor provides information for a namespace through different classes.
Topics:
• Classes supported for systems running Linux
• Classes supported for systems running Windows
Classes supported for systems running Linux
For systems running Linux operating system, only the following classes are currently supported:
● DCIM_AlertIndication
● DCIM_AssetOwnerInformation
● DCIM_BIOSElement
● DCIM_BIOSEnumeration
● DCIM_BIOSPassword
● DCIM_BIOSService
● DCIM_Card
● DCIM_Chassis
● DCIM_ComputerSystem
● DCIM_ControllerView
● DCIM_Docked
● DCIM_Fan
● DCIM_LogEntry
● DCIM_Memory
● DCIM_Location
● DCIM_NumericSensor
● DCIM_PhysicalDiskView
● DCIM_Processor
● DCIM_VirtualDiskView
Classes supported for systems running Windows
The namespace to access the Dell Command | Monitor DMTF profiles is root\dcim\sysman.
The following tables describe the classes and properties associated with each class.
DCIM_AlertIndication
Table 1. AlertIndication
Property Description Supported
Operating
System(s)
AlertingElementFormat The format of the AlertingManagedElement
property is interpretable based on the value of this
property. Possible values are:
Windows, Linux
5
12 Dell Command | Monitor 10.5 classes and properties
Table 1. AlertIndication (continued)
Property Description Supported
Operating
System(s)
● 0 = Unknown—The format is unknown or
not meaningfully interpretable by a CIM client
application.
● 1 = Other—The format is defined by the value
of the OtherAlertingElementFormat property.
● 2 = CIMObjectPath—The format
is a CIMObjectPath, with format
NamespacePath:ClassName.Prop1 = Value1,
Prop2=Value2, . . . specifying an instance in
the CIM Schema.
AlertingManagedElement The identifying information of the entity (that
is, the instance) for which this Indication is
generated. The property contains the path of an
instance, encoded as a string parameter—if the
instance is modeled in the CIM Schema. If it is
not a CIM instance, the property contains some
identifying string that names the entity for which
the Alert is generated. The path or identifying
string is formatted per the AlertingElementFormat
property.
Windows, Linux
AlertType Primary classification of the Indication. Possible
values are:
● 1 = Other—The Indication's OtherAlertType
property conveys its classification. Use of
Other in an enumeration is a standard
CIM convention. It means that the current
Indication does not fit into the categories that
are described by this enumeration.
● 2 = Communications Alert—An Indication of
this type is principally associated with the
procedures and/or processes that are required
to convey information from one point to
another.
● 3 = Quality of Service Alert—An Indication
of this type is principally associated with a
degradation or errors in the performance or
function of an entity.
● 4 = Processing Error—An Indication of this
type is principally associated with a software
or processing fault.
● 5 = Device Alert—An Indication of this type
is principally associated with an equipment or
hardware fault.
● 6 = Environmental Alert—An Indication of this
type is principally associated with a condition
relating to an enclosure in which the hardware
resides, or other environmental considerations.
● 7 = Model Change—The Indication addresses
changes in the Information Model. For example,
it may embed a Lifecycle Indication to convey
the specific model change being alerted.
● 8 = Security Alert—An Indication of this type
is associated with security violations, detection
of viruses, and similar issues.
Windows, Linux
EventID An instrumentation or provider-specific value
that describes the underlying real-world event
Windows, Linux
Dell Command | Monitor 10.5 classes and properties 13
Table 1. AlertIndication (continued)
Property Description Supported
Operating
System(s)
that is represented by the Indication. Two
Indications with the same, non NULL EventID
value are considered, by the creating entity,
to represent the same event. The comparison
of two EventID values is only defined for
Alert Indications with identical, non NULL values
of SystemCreateClassName, SystemName, and
ProviderName.
IndicationIdentifier An identifier for the Indication. This property is
similar to a key value in that it can be used
for identification, when correlating Indications
(see the CorrelatedIndications array). Its value
SHOULD be unique as long as correlations
are reported, but MAY be reused or left
NULL if no future Indications will reference it
in their CorrelatedIndications array. To ensure
uniqueness, the value of IndicationIdentifier should
be constructed using the following preferred
algorithm: <OrgID>:<LocalID> Where <OrgID> and
<LocalID>are separated by a colon (:), and where
<OrgID> must include a copyrighted, trademarked,
or otherwise unique name that is owned by
the business entity that is creating or defining
the IndicationIdentifier or that is a recognized
ID that is assigned to the business entity by a
recognized global authority. (This requirement is
similar to the <Schema Name>_<Class Name>
structure of Schema class names.) In addition,
to ensure uniqueness must not contain a colon
(:). When using this algorithm, the first colon to
appear in IndicationIdentifier must appear between
<OrgID>and <LocalID> is chosen by the business
entity and should not be re-used to identify
different underlying (real-world) elements. If the
above preferred algorithm is not used, the
defining entity should assure that the resulting
IndicationIdentifier is not reused across any
IndicationIdentifiers that are produced by this
or other providers for the NameSpace of this
instance.
Windows
IndicationTime The time and date of creation of the Indication.
The property may be set to NULL if the
entity creating the Indication is not capable of
determining this information.
NOTE: IndicationTime may be the same for
two Indications that are generated in rapid
succession.
Windows
Message The formatted message. This message is
constructed by combining some or all of
the dynamic elements specified in the
MessageArguments property with the static
elements uniquely identified by the MessageID in a
message registry or other catalog associated with
the OwningEntity.
Windows
MessageArguments An array containing the dynamic content of the
message.
Windows, Linux
14 Dell Command | Monitor 10.5 classes and properties
Table 1. AlertIndication (continued)
Property Description Supported
Operating
System(s)
MessageID A string that uniquely identifies, within the scope
of the OwningEntity, the format of the Message.
Windows
OtherAlertingElementFormat A string defining Other values for
AlertingElementFormat. This value MUST be set to
a non NULL value when AlertingElementFormat is
set to a value of 1 (Other). For all other values
of AlertingElementFormat, the value of this string
must be set to NULL.
Windows, Linux
OtherAlertType A string describing the Alert type—used when
the AlertType property is set to 1, Other State
Change.
Windows, Linux
OtherSeverity Holds the value of the user-defined severity value
when PerceivedSeverity is 1 (Other).
Windows, Linux
OwningEntity A string that uniquely identifies the entity that
owns the definition of the format of the Message
described in this instance. OwningEntity MUST
include a copyrighted, trademarked or otherwise
unique name that is owned by the business entity
or standards body defining the format.
Windows, Linux
PerceivedSeverity An enumerated value that describes the severity
of the Alert Indication from the notifier's point of
view: Possible values are:
● 2 and 0—Information and Unknown
(respectively) follow common usage. Literally,
the AlertIndication is purely informational or its
severity is unknown.
● 1 = Other—By CIM convention, is used to
indicate that the Severity's value can be found
in the OtherSeverity property.
● 3 = Degraded/Warning—Is used when it is
appropriate to let the user decide if action is
needed.
● 4 = Minor—Is used to indicate that action is
needed, but the situation is not serious now.
● 5 = Major—Is used to indicate that action is
needed NOW.
● 6 = Critical—Is used to indicate that action is
needed NOW and the scope is broad (perhaps
an imminent outage to a critical resource
results).
● 7 = Fatal/Non recoverable—Is used to indicate
that an error occurred, but it is too late to take
remedial action.
Windows, Linux
ProbableCause An enumerated value that describes the probable
cause of the situation that resulted in the
AlertIndication. Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Adapter/Card Error
● 3 = Application Subsystem Failure
● 4 = Bandwidth Reduced
● 5 = Connection Establishment Error
● 6 = Communications Protocol Error
Windows, Linux
Dell Command | Monitor 10.5 classes and properties 15
Table 1. AlertIndication (continued)
Property Description Supported
Operating
System(s)
● 7 = Communications Subsystem Failure
● 8 = Configuration/Customization Error
● 9 = Congestion
● 10 = Corrupt Data
● 11 = CPU Cycles Limit Exceeded
● 12 = Dataset/Modem Error
● 13 = Degraded Signal
● 14 = DTE-DCE Interface Error
● 15 = Enclosure Door Open
● 16 = Equipment Malfunction
● 17 = Excessive Vibration
● 18 = File Format Error
● 19 = Fire Detected
● 20 = Flood Detected
● 21 = Framing Error
● 22 = HVAC Problem
● 23 = Humidity Unacceptable
● 24 = I/O Device Error
● 25 = Input Device Error
● 26 = LAN Error
● 27 = Non-Toxic Leak Detected
● 28 = Local Node Transmission Error
● 29 = Loss of Frame
● 30 = Loss of Signal
● 31 = Material Supply Exhausted
● 32 = Multiplexer Problem
● 33 = Out of Memory
● 34 = Output Device Error
● 35 = Performance Degraded
● 36 = Power Problem
● 37 = Pressure Unacceptable
● 38 = Processor Problem (Internal Machine
Error)
● 39 = Pump Failure
● 40 = Queue Size Exceeded
● 41 = Receive Failure
● 42 = Receiver Failure
● 43 = Remote Node Transmission Error
● 44 = Resource at or Nearing Capacity
● 45 = Response Time Excessive
● 46 = Retransmission Rate Excessive
● 47 = Software Error
● 48 = Software Program Abnormally Terminated
● 49 = Software Program Error (Incorrect
Results)
● 50 = Storage Capacity Problem
● 51 = Temperature Unacceptable
● 52 = Threshold Crossed
● 53 = Timing Problem
● 54 = Toxic Leak Detected
● 55 = Transmit Failure
● 56 = Transmitter Failure
16
Dell Command | Monitor 10.5 classes and properties
Table 1. AlertIndication (continued)
Property Description Supported
Operating
System(s)
● 57 = Underlying Resource Unavailable
● 58 = Version MisMatch
● 59 = Previous Alert Cleared
● 60 = Login Attempts Failed
● 61 = Software Virus Detected
● 62 = Hardware Security Breached
● 63 = Denial of Service Detected
● 64 = Security Credential MisMatch
● 65 = Unauthorized Access
● 66 = Alarm Received
● 67 = Loss of Pointer
● 68 = Payload Mismatch
● 69 = Transmission Error
● 70 = Excessive Error Rate
● 71 = Trace Problem
● 72 = Element Unavailable
● 73 = Element Missing
● 74 = Loss of Multi Frame
● 75 = Broadcast Channel Failure
● 76 = Invalid Message Received
● 77 = Routing Failure
● 78 = Backplane Failure
● 79 = Identifier Duplication
● 80 = Protection Path Failure
● 81 = Sync Loss or Mismatch
● 82 = Terminal Problem
● 83 = Real Time Clock Failure
● 84 = Antenna Failure
● 85 = Battery Charging Failure
● 86 = Disk Failure
● 87 = Frequency Hopping Failure
● 88 = Loss of Redundancy
● 89 = Power Supply Failure
● 90 = Signal Quality Problem
● 91 = Battery Discharging
● 92 = Battery Failure
● 93 = Commercial Power Problem
● 94 = Fan Failure
● 95 = Engine Failure
● 96 = Sensor Failure
● 97 = Fuse Failure
●
98 = Generator Failure
● 99 = Low Battery
● 100 = Low Fuel
● 101 = Low Water
● 102 = Explosive Gas
● 103 = High Winds
● 104 = Ice Buildup
● 105 = Smoke
● 106 = Memory Mismatch
● 107 = Out of CPU Cycles
● 108 = Software Environment Problem
Dell Command | Monitor 10.5 classes and properties
17
Table 1. AlertIndication (continued)
Property Description Supported
Operating
System(s)
● 109 = Software Download Failure
● 110 = Element Reinitialized
● 111 = Timeout
● 112 = Logging Problems
● 113 = Leak Detected
● 114 = Protection Mechanism Failure
● 115 = Protecting Resource Failure
● 116 = Database Inconsistency
● 117 = Authentication Failure
● 118 = Breach of Confidentiality
● 119 = Cable Tamper
● 120 = Delayed Information
● 121 = Duplicate Information
● 122 = Information Missing
● 123 = Information Modification
● 124 = Information Out of Sequence
● 125 = Key Expired
● 126 = Non-Repudiation Failure
● 127 = Out of Hours Activity
● 128 = Out of Service
● 129 = Procedural Error
● 130 = Unexpected Information
ProviderName
The name of the Provider generating this
Indication.
Windows, Linux
SystemCreationClassName The scoping of the creation class name of the
system for the provider, generating this indication.
Windows, Linux
SystemName The scoping name of the system for the provider,
generating this indication.
Windows, Linux
Trending Provides information on trending—trending up,
down, or no change. Possible values are:
● 0 = Unknown
● 1 = Not Applicable
● 2 = Trending Up
● 3 = Trending Down
● 4 = No Change
Windows, Linux
DCIM_ApplicationProxySetting
Table 2. ApplicationProxySetting
Property Description
Proxy Address Proxy Hostname used by application
Port Number Proxy Port used by application
ChangeProxySetting (Method) This method changes the proxy hostname and port number to
be used by Dell Command | Monitor Parameters:
● New Hostname value to be set
● New Port value to be set
Return Values:
18 Dell Command | Monitor 10.5 classes and properties
Table 2. ApplicationProxySetting (continued)
Property Description
● A return code of 0 indicates the proxy settings that were
updated successfully.
● A return code of 1 indicates the proxy settings that were
not updated successfully.
DCIM_BaseMetricDefinition
Table 3. BaseMetricDefinition
Property Description
Caption The Caption property is a short textual description (one- line string) of
the object.
Description The Description property provides a textual description of the object.
ElementName A user-friendly name for the object. This property allows each instance
to define a user-friendly name in addition to its key properties, identity
data, and description information.
NOTE: The Name property of ManagedSystemElement is also
defined as a user-friendly name. But, it is often subclassed to be
a Key. It is not reasonable that the same property can convey
both identity and a user-friendly name, without inconsistencies.
Where Name exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in both the
Name and ElementName properties.
Accuracy Indicates the accuracy of the values reported for this metric.
AccuracyUnits The accuracy is expressed as the value of theAccuracy property in the
units specified by the AccuracyUnits property.
BreakdownDimensions Defines one or more strings that can be used to refine (break down)
queries against the BaseMetricValues along a certain dimension. An
example is a transaction name, allowing the break down of the total
value for all transactions into a set of values, one for each transaction
name. Other examples might be application system or user group name.
The strings are free format and should be meaningful to the end users of
the metric data. The strings indicate which break down dimensions are
supported for this metric definition, by the underlying instrumentation.
Calculable An enumerated value that describes the characteristics of the metric,
for purposes of performing calculations. Possible values are:
● 1 = Non-calculable
● 2 = Summable
● 3 = Non-summable
ChangeType ChangeType indicates how the metric value changes, in the form of
typical combinations of finer grain attributes such as direction change,
minimum and maximum values, and wrapping semantics. Possible values
are:
● 0 = Unknown
● 2 = N/A
● 3 = Counter
● 4 = Gauge
● 5..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
● 3 = Counter
Dell Command | Monitor 10.5 classes and properties 19
Table 3. BaseMetricDefinition (continued)
Property Description
DataType The data type of the metric. These types represent the datatypes
defined for CIM. Possible values are:
● 1 = boolean
● 2 = char16
● 3 = datetime
● 4 = real32
● 5 = real64
● 6 = sint16
● 7 = sint32
● 8 = sint64
● 9 = sint8
● 10 = string
● 11 = uint16
● 12 = uint32
● 13 = uint64
● 14 = uint8
GatheringType GatheringType indicates how the metric values are gathered by the
underlying instrumentation. This allows the client application to choose
the right metric for the purpose. Possible values are:
● 0 = Unknown
● 2 = OnChange
● 3 = Periodic
● 4 = OnRequest
● 5..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
Id A string that uniquely identifies the metric definition. The use of OSF
UUID/GUIDs is recommended.
IsContinuous True
Name The name of the metric. This name does not have to be unique, but
should be descriptive and may contain blanks.
ProgrammaticUnits Identifies the specific units of a value. The value of this property shall be
a legal value of the Programmatic Units qualifier as defined in Appendix
C.1 of DSP0004 V2.4 or later.
SampleInterval If metric values are collected at regular intervals, the SampleInterval
property indicates the length of the interval. If non-null, the value
of the SampleInterval shall be expressed in interval notation. A value
of NULL shall indicate the SampleInterval is unknown. A value of
99990101000000.000000+000 shall indicate the sampling interval is
irregular.
TimeScope TimeScope indicates the time scope to which the metric value applies.
Possible values are:
● 0 = Unknown
● 2 = Point
● 3 = Interval
● 4 = StartupInterval
● 5..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
Units Identifies the specific units of a value. Examples are Bytes, Packets,
Jobs, Files, Milliseconds, and Amps.
20 Dell Command | Monitor 10.5 classes and properties
/