Mont Blanc Profile User manual

S E R V I C E G U I D E

Service Guide Montblanc Profile

Quartz Chronograph

(A) Hour hand

(B) Minute hand

(D) Chronograph minute counter (30 minutes)

(E) Chronograph 1/10 second counter (10/10 second)

(F) Chronograph second hand

(G) Date

Crown:

(1): Normal position

(2): Position for quick adjustment of time zones, including adjustment of

the date by winding the watch on by 24 hours. The chronograph minute

counter is started using the pusher at 4 o'clock (P2).

(3): Position for setting the time. In this position the subsidiary second

hand ceases to move, to allow the exact time to be set. The chronograph

second hand is started using the pusher at 2 o'clock (P1), and the

chronograph 1/10 second counter is started using the pusher at 4 o'clock

(P2).

Special functions:

(P1) Starting and stopping the chronograph. Pressing once starts the

large second hand (D), which sets the minute counter (F) in motion after

60 seconds have elapsed. Pressing a second time stops the large

second hand and the minute counter, and the 1/10 second counter then

shows the recorded time.

(P2) Returning the chronograph to zero and split-time function. Pressing

once when the chronograph has already been stopped (see P1) returns

the three chronograph hands (large second hand, 1/10 second counter,

minute counter) to zero. Pressing once when the chronograph is running

(see P1) stops the three chronograph hands (large second hand, 1/10

second counter, minute counter) to show the split time; pressing a

second time displays the elapsed time again. This split-time function may

be activated as many times as required.

Download PDF