Mont Blanc Profile User manual

Category
Watches
Type
User manual
S E R V I C E G U I D E
Service Guide Montblanc Profile
Quartz Chronograph
(A) Hour hand
(B) Minute hand
(C) Subsidiary seconds dial (independent of chronograph function)
(D) Chronograph minute counter (30 minutes)
(E) Chronograph 1/10 second counter (10/10 second)
(F) Chronograph second hand
(G) Date
Crown:
(1): Normal position
(2): Position for quick adjustment of time zones, including adjustment of
the date by winding the watch on by 24 hours. The chronograph minute
counter is started using the pusher at 4 o'clock (P2).
(3): Position for setting the time. In this position the subsidiary second
hand ceases to move, to allow the exact time to be set. The chronograph
second hand is started using the pusher at 2 o'clock (P1), and the
chronograph 1/10 second counter is started using the pusher at 4 o'clock
(P2).
Special functions:
(P1) Starting and stopping the chronograph. Pressing once starts the
large second hand (D), which sets the minute counter (F) in motion after
60 seconds have elapsed. Pressing a second time stops the large
second hand and the minute counter, and the 1/10 second counter then
shows the recorded time.
(P2) Returning the chronograph to zero and split-time function. Pressing
once when the chronograph has already been stopped (see P1) returns
the three chronograph hands (large second hand, 1/10 second counter,
minute counter) to zero. Pressing once when the chronograph is running
(see P1) stops the three chronograph hands (large second hand, 1/10
second counter, minute counter) to show the split time; pressing a
second time displays the elapsed time again. This split-time function may
be activated as many times as required.
  • Page 1 1
  • Page 2 2

Mont Blanc Profile User manual

Category
Watches
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI