Lionel American Flyer SD-9 Owner's manual

Lionel
Brand
Lionel
Model
American Flyer SD-9
Type
Owner's manual

This manual is also suitable for

Lionel American Flyer SD-9

The Lionel American Flyer SD-9 is a powerful and versatile locomotive that is perfect for hauling freight on your model railroad. It features a number of realistic details, including a die-cast metal body, operating headlights, and a smoke unit. The SD-9 is also equipped with a powerful motor that can pull long trains with ease.

In addition to its impressive performance, the SD-9 is also very easy to operate. It comes with a user-friendly remote control that allows you to control the locomotive's speed, direction, and sound effects. The SD-9 is also compatible with Lionel's TrainMaster Command Control system, which gives you even more control over the locomotive's operation.

Lionel American Flyer SD-9

The Lionel American Flyer SD-9 is a powerful and versatile locomotive that is perfect for hauling freight on your model railroad. It features a number of realistic details, including a die-cast metal body, operating headlights, and a smoke unit. The SD-9 is also equipped with a powerful motor that can pull long trains with ease.

In addition to its impressive performance, the SD-9 is also very easy to operate. It comes with a user-friendly remote control that allows you to control the locomotive's speed, direction, and sound effects. The SD-9 is also compatible with Lionel's TrainMaster Command Control system, which gives you even more control over the locomotive's operation.

American Flyer
SD-9 Freight Set
Owner’s Manual
74-9615-250
2/06
2
Table of contents
Transformer operations
Running your locomotive with a Lionel transformer 3
Locking your locomotive into a single operational state 4
Using your locomotive and rolling stock couplers 5
Rolling stock operations
Installing the control rail for the Coal Dump Car 6
Powering the control rail 7
Unloading the Coal Dump Car 8
Maintaining and servicing your set
Lubricating your locomotive 9
Replacing your locomotive’s lamps 10
Replacing the lamp in the Extended Vision Caboose 11
Limited Warranty/Lionel Service 12
Congratulations!
The following Lionel marks may be used throughout this instruction manual and are protected under
law. All rights reserved.
Lionel
®
, TrainMaster
®
, Odyssey
®
, RailSounds
®
, CrewTalk
™
, TowerCom
™
, DynaChuff
™
,
StationSounds
™
, Pullmor
®
, ElectroCoupler
™
, Magne-Traction
®
, CAB-1
®
Remote Controller,
PowerMaster
®
, Lionel ZW
®
, ZW
®
, PowerHouse
®
, TMCC
®
, Lionelville
™
, Lockon
®
, Wireless Tether
™
,
LionMaster
®
, FatBoy
™
, American Flyer
®
, TrainSounds
™
The name FasTrack
®
is used with permission from Pitsco, Inc.
Freight set inventory
• American Flyer SD-9 diesel locomotive
• Boxcar
• Gondola with pipe load
• Operating coal dump car
• Extended vision caboose
C
ongratulations on your purchase of the American Flyer Chessie System SD-9 Freight Set. This
set features and SD-9 diesel locomotive, a boxcar, a gondola with pipe load, a coal dump car,
and an extended vision caboose. The Chessie System SD-9 Freight Set is ready for duty on your
mainline.
3
3
3
Move ‘em out!
Get your locomotive moving. Press the DIRECTION button on your
transformer. This sequences the reverse unit to the next operating state.
Adjust track voltage until your locomotive moves at your desired speed. To
increase speed, increase track voltage. To decrease speed, reduce voltage. To stop the
locomotive, turn-off track power.
See page 4 for information on locking your locomotive into a single
operational state.
Place your locomotive on American Flyer or S gauge
two-rail track.
The curves must have a radius of at least 20”.
2
2
Power up your locomotive with your transformer.
Your locomotive is designed to operate on 9-15 volts alternating
current. Virtually all American Flyer or Lionel alternating-current transformers
are suitable.
Do not power your locomotive with direct current (DC).
Damage to sensitive electronic components may occur.
1
1
Running your locomotive with a Lionel transformer
Transformer operations
Caution!
Note!
T
o select a single operational state for your locomotive (for example, forward only), you
can deactivate the reverse unit’s sequencing function with the directional control switch.
Get your locomotive moving in the desired direction, then slow it down without stopping.
Set the reverse unit switch to OFF. Refer to Figure 1 for the location of the switch. The
locomotive is now “locked” into your chosen direction.
When you no longer want single-direction operation, just slide the switch back to ON.
Your locomotive’s reverse unit will “reset” to forward after any power interruption
lasting five seconds or longer, regardless of the original locked-out direction.
Locking your locomotive into a single operational state
Transformer operations
4
Note!
Figure 1. Switch location
Reverse unit switch
5
Transformer operations
P
ush up on the uncoupling weight located directly under the coupler to open the coupler.
To couple two cars together, place them on the track with at least one of the couplers
open, then slide them together. The couplers will close automatically.
Using your locomotive and rolling stock couplers
6
Installing the control rail for the Coal Dump Car
Follow these steps and refer to Figure 2 as you install the control rail (included)
1. Slide the control rail arms under the track ties.
2. Position the end of the ties under the pins on the control rail arms.
3. Lift up on the ends of the arms to snap the control rail onto the track.
Figure 2. Control rail attachment
Control rail
Control rail arm
Rolling stock operations
7
POWER
SUPPLY
UA
Figure 3. Control rail connection
Switch
terminals
Control rail
spring clip
Sliding
contact
Powering the control rail
T
he control rail must be connected to a transformer terminal. Be sure that the wires are
stripped back 1/8” to 1/4”.
Only an adult should perform this task. Use a pair of wire strippers. Always be
careful when stripping wires.
As illustrated in Figure 3, your power supply should be connected to the track. Attach a
wire to the spring clip on the control rail and connect it to a terminal on the separate ON/OFF
switch. Attach another wire to the remaining switch terminal and connect it to the power
supply. Please note that the control rail and the track rail closest to it should share the same
power supply terminal.
Your transformer should supply 12-18 volts (AC) to your layout.
Caution!
Note!
Rolling stock operations
8
Unloading the Coal Dump Car
P
osition your car so that the contact on the truck will slide on the control rail. Power your
layout at 12-18 volts (AC). Press and hold the button to dump the car. Place the trackside
bin next to the car.
Be sure the track is powered up before you operate this car.
Note!
Rolling stock operations
9
Maintaining and servicing your set
Lubricating your locomotive
H
elp your Lionel locomotive lead a long and productive life on your railroad by
maintaining it properly.
We recommend that you purchase a Lionel Lubrication and Maintenance Kit (6-62927),
available from your Lionel dealer. Two basic rules to keep in mind: never over-lubricate (a
small amount will do), and avoid getting grease or oil on the locomotive’s wheels or your
track. You’ll know your locomotive requires lubrication when visual inspection reveals dryness
on the parts indicated in Figure 4. Remove accumulated dirt and dust before lubricating, and
always lubricate any locomotive emerging from prolonged storage.
ON OFF
ON OFF
Figure 4. Underside details and lubrication points
Grease
sparingly
with Lionel
grease
Oil
sparingly with
Lionel oil
Oil
sparingly
with
Lionel oil
Body screw
(under truck)
Body screw
(under truck)
Body screw
(under truck)
Truck frame
screws
Truck
frame
screws
Replacing your locomotive’s lamps
Y
our locomotive is illuminated by one lamp, which is secured in the number board/headlight
lens inside the cab. Follow these steps to replace the lamp.
1. Remove the two truck frame screws on each truck and lift the truck frame off the trucks. Refer
to Figure 4 on page 9 for the location of the screws.
2. Remove the four body screws and lift the body off the frame. Refer to Figure 2 on page 6 for the
location of the screws.
3. Locate the expired lamp and gently pull it out of the socket.
4. Replace it with Lionel part no. 600-8352-311. To reassemble, reverse the procedure.
5. Replace the truck frame on the trucks.
Maintaining and servicing your set
10
11
Figure 5. Lamp replacement
Replacing the lamp in the Extended Vision Caboose
T
his car is illuminated by one lamp, Lionel part no. 600-8352-311. During the course of
normal operations, you may find that this lamp requires replacement. Replacement lamps
are available at your authorized Lionel Service Center or from Lionel Service in Chesterfield,
Michigan. Refer to Figure 5.
1. Lift the roof off the car.
2. Locate and pull the expired lamp straight up and out of the socket.
3. Press the replacement lamp into the socket.
4. Replace the roof.
Lionel part no. 600-8352-311
Maintaining and servicing your set
Limited Warranty/Lionel Service
T
his Lionel product, including all mechanical and electrical components, moving parts, motors and
structural components, except for light bulbs, is warranted to the original consumer-purchaser, for one
year against original defects in materials or workmanship when purchased through an authorized Lionel
merchant.
This warranty does NOT cover normal wear and tear, light bulbs, defects appearing in the course of
commercial use, or damage resulting from abuse or misuse of the product by the purchaser. Transfer of this
product by the original consumer-purchaser to another person voids this warranty. Modification of this
product voids this warranty.
Any warranted product which is defective in original materials or workmanship and is delivered by the
original consumer-purchaser to Lionel L.L.C. or an authorized Lionel L.L.C. Service Center, together with proof
of original purchase will, at the option of Lionel L.L.C., be repaired or replaced, without charge for parts or
labor. In the event the defective product cannot be repaired, and a replacement is not available, a refund of the
original purchase price will be granted. Any products on which warranty service is sought must be sent freight
or postage prepaid, as transportation and shipping charges are not covered by the warranty.
In no event shall Lionel L.L.C. be liable for incidental or consequential damages.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
exclusion may not apply to you.
This limited warranty gives you specific legal rights, and you may have other rights which vary from state
to state.
Instructions for Obtaining Service
If service for this Lionel L.L.C. product is required, bring the item, along with your dated sales receipt and
completed warranty information to the nearest Authorized Lionel Service Center. Your nearest Lionel Service
Center can be found by calling 1-800-4-Lionel, or by accessing our Website at www.lionel.com.
If you prefer to send your product back to Lionel L.L.C. for repair in Michigan, you must first call
586-949-4100 or FAX 586-949-5429, or write to Customer Service, P.O. Box 748, New Baltimore, MI
48047-0748, stating what the item is, when it was purchased and what seems to be the problem. You will be
sent a return authorization letter and label to ensure your merchandise will be properly handled upon receipt.
Once you have received your return authorization and label, make sure that the item is packed to prevent
damage during shipping and handling. We suggest that you use the product’s original packaging. This
shipment must be prepaid and we recommend that it be insured.
Please make sure you have followed all of the above instructions carefully before returning any
merchandise for service. You may choose to have your product repaired by one of our Authorized Lionel
Service Centers after its warranty has expired. A reasonable service fee will be charged.
Warranty Information
Please complete the information below and keep it, along with your dated sales receipt. You must present
this and your dated sales receipt when requesting warranty service.
Name ________________________________________________________________________
Address ______________________________________________________________________
Place of Purchase ________________________________________________________________
Date of Purchase ________________________________________________________________
Product Number ________________________________________________________________
Product Description ______________________________________________________________
©2006 LIONEL L.L.C., CHESTERFIELD, MI 48051-2493
UNITED STATES OF AMERICA
PRINTED IN CHINA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Lionel American Flyer SD-9 Owner's manual

Lionel
Brand
Lionel
Model
American Flyer SD-9
Type
Owner's manual
This manual is also suitable for

Lionel American Flyer SD-9

The Lionel American Flyer SD-9 is a powerful and versatile locomotive that is perfect for hauling freight on your model railroad. It features a number of realistic details, including a die-cast metal body, operating headlights, and a smoke unit. The SD-9 is also equipped with a powerful motor that can pull long trains with ease.

In addition to its impressive performance, the SD-9 is also very easy to operate. It comes with a user-friendly remote control that allows you to control the locomotive's speed, direction, and sound effects. The SD-9 is also compatible with Lionel's TrainMaster Command Control system, which gives you even more control over the locomotive's operation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents