Endurance LS3272VNDR Dimensions Guide

Installation: Drop-in

cannot be under mounted

3272VN

32" x 72" x 23"

• Before ordering or installing, please consider future

access to equipment.

• Add bedding compound to fully level and support bottom

of tub.

• Tubs equipped with an air bath or a pre-leveled

foam base are designed to rest on the floor without bedding

compound, provided the floor is level.

• Please measure tub on-site before building tub decking.

• Jet, pump & blower locations are predetermined and

cannot be changed.

• Suction and control locations may vary.

• Specifications and configurations are subject to change

without notice.

• Measurements are +1/2" and are subject to change

without notice.

• Measurements herein supersede all others published

prior to publication date shown below.

OPTIONS

Colors Available - White Biscuit

Quick Ship - reduces lead time - call for availability

Inline Heater with Pump - Whirlpool or Dual Bath

Lift & Turn Drain Kit -Chrome,Brushed Nickel, White

12 air jets, air blower, textured bottom

IMPORTANT INFORMATION

12 air jets, air blower, textured bottom

ELECTRICAL SPECIFICATIONS:

Required Electrical Service 110 Volt

Air Bath or Whirlpool 1-15 amp GFCI

Whirlpool with Inline Heater 1-20 amp GFCI

Dual Bath 1-20 amp GFCI

Soaker

GENERAL SPECIFICATIONS:

Material Acrylic

Plumbed Weight : 165lbs / 75kg

Soaker Weight : 135lbs / 61kg

Average Fill: 65 gal to above jet level