Supplement
Sheet
Date: November 29, 2010
Subject: Front Wheel
Model(s): 21A-250H065 & 21A-250J265
Printed In USA
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Form No. 769-06712
(November 29, 2010)
Your tiller’s front wheel may have been packed separately inside
the carton for shipping reasons. To attach the wheel, refer to the
instructions below:
Attaching the Front Wheel
Remove the hex screw, flange nut, spacer and tube sleeve 1.
from the front wheel bracket.
Slide the tube sleeve over the hex screw and position the 2.
spacer within the wheel hub.
Secure the wheel to the wheel bracket with the flange nut 3.
removed in Step 1 using two /-inch wrenches
(or adjustable wrenches). See Fig. 1.
Figure 1
-
1
