TOA CM-960 User manual

Brand: TOA

Model: CM-960

Category: AV equipment stands

Type: User manual

This manual is also suitable for

TOA CM-960 is a ceiling mount speaker designed for clear and powerful audio reproduction in a variety of commercial and residential applications. With its 6.7 kΩ impedance and 6 W power handling, it delivers high-quality sound while ensuring safe operation. The CM-960 features a compact design with a 200 mm mounting hole diameter, making it suitable for discreet installation in drop ceilings. It supports parallel-branch connections for flexible wiring and comes with a push-in terminal block for easy and secure cable connections.

Install the unit only in a location that can structurally

support the weight of the unit and the mounting

bracket. Doing otherwise may result in the speaker

falling down and causing personal injury and/or

property damage.

CM-760, CM-960

CEILING MOUNT SPEAKER

INSTALLATION MANUAL

13 kΩ

6.7 kΩ

(BRN)

(BLK)

(WHT)

3.3 kΩ

3 W (3.3 kΩ)

6 W (1.7 kΩ)

COM

Bridging terminal

Terminal

1.7 kΩ

COM

Max. 50 mm

Ceiling

533-06-083-2B

URL: http://www.toa.jp/

Please

follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend that you keep this manual handy for future reference.

WARNING

Indicates a potentially hazardous situation which,

if mishandled, could result in death or serious

personal injury.

CAUTION

Indicates a potentially hazardous situation which,

if mishandled, could result in moderate or minor

personal injury, and/or property damage.

1. SAFETY PRECAUTIONS

Before installation or use, be sure to carefully read all the

instructions in this section for correct and safe operation.

4. APPLICABLE SPEAKER PANELS

• CM-760: CP-73, CP-77

• CM-960: CP-93, CP-97

3. WIRING DIAGRAM

Do not operate the speaker for an extended period

of time with the sound distorting. This is an indication

of a malfunction, which in turn can cause heat to

generate and result in a fire.

Step 4. Connect springs to the speaker panel to attach it.

6. CONNECTIONS

Cables connectable to the push-in terminals are IV or HIV

cables (solid wire of ø0.8 – 1.2 mm or stranded-conductor

of 0.75 – 1.25 mm

Step 1. Trim a cable jacket about 9 mm. (Use the strip

gauge provided at the terminal block.)

Step 2. Fully insert the cable into the hole in the terminal

according to the cable indications on the terminal.

To remove the cable, press the terminal button,

then pull the cable.

Coil spring

Wire ties

Speaker

2. INSTALLATION PRECAUTION

Never cut off the wire ties attached to the coil spring as

shown below since they serve to prevent the speaker

panel from falling off if the coil spring accidentally beaks.

5. INSTALLATION

Step 1. Make a hole with the following diameter in the

ceiling.

[Mounting hole diameter]

• CM-760: ø150 mm ±3

• CM-960: ø200 mm ±3

Step 2. Connect the speaker cables to the push-in terminal

block. (Parallel-branch connections can be made.)

Step 3. Mount the speaker in the ceiling. Usable ceiling

boards are those which are up to 50 mm thick.

Traceability Information for Europe

Manufacturer:

TOA Corporation

7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo, Japan

Authorized representative:

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg, Germany

TOA CM-960 User manual

Brand: TOA

Model: CM-960

Category: AV equipment stands

Type: User manual

This manual is also suitable for

Download PDF

report

TOA CM-960 User manual

This manual is also suitable for

TOA CM-960 User manual

Related papers

Other documents