MIXX Play SX User Guides

Brand: MIXX

Model: Play SX

Category: Power banks

Type: User Guides

MIXX Play SX wireless earphones offer a seamless and immersive audio experience, empowering you with wireless freedom and a range of features to elevate your listening. With Bluetooth connectivity, you can effortlessly pair your earphones to your smartphone or other Bluetooth-enabled devices, enjoying a stable and uninterrupted audio connection.

The earphones boast intuitive controls integrated into the remote, allowing you to effortlessly manage your music and calls without reaching for your device. Play, pause, skip tracks, adjust volume, and answer or end calls with just a few simple button presses.

Play SX

Wireless

Earphones

HOW TO GUIDE

GUIDE D’INSTRUCTION

BEDIENUNGSANLEITUNG

LET’S CHECK

LET’S START

LET’S PAIR

LET’S USE VOICE ASSISTANT

LET’S CHARGE

CONTROL FUNCTIONS

LET’S BE SAFE

LET’S RECYCLE

SAFE USAGE INFO

CONTENTS

LET’S CHECK

What’s in the box?

MIXX Play SX

Wireless Earphones

3 Pairs of Ear Cushions,

small, medium and large

Micro USB

Charging Cable

HOW TO GUIDE

LET’S START

Built-in Microphone (back of remote)

LED Indicator Light

Volume Up / Next Button

Multi-function Button

Micro USB Charging Port

Volume Down / Previous Button

LET’S PAIR

Ensure your phone is not paired with any other

Bluetooth device.

The first time you pair these earphones, press

and hold the Multi-function Button (4) until you

hear ‘Power on, pairing’ and the LED Light (2) is

flashing BLUE.

Go to the Bluetooth settings on your device and

select ‘MIXX Play SX’ from the list.

If you are prompted for a passcode to pair,

use either ‘0000’ or ‘1234’.

Once paired successfully your earphones will

say ‘Pairing successful, connected’.

You can now enjoy your music.

Note: Your earphones will say ‘Connected’ when

it automatically reconnects to the last audio

device it was paired with.

LET’S USE VOICE ASSISTANT

Check that your phone has the Voice Assistant

installed and is not paired with any other device.

Pair your Bluetooth device with your earphones.

Press and hold the Multi-function Button (4)

for 2 seconds.

Your Voice Assist familiar ‘beep’ will sound to

confirm connection with Siri or Google Assistant.

You can now ask Siri or Google Assistant a

question or state a command.

LET’S CHARGE

Connect the earphones to a suitable USB wall

charger, a computer USB port or a power bank

using the micro USB charging cable supplied.

The Micro USB Charging Port (5) is under the

cover on the side of the earphones’ remote control.

While charging, the LED Indicator Light (2) will

shine RED.

Once the earphones are fully charged, the RED

light (2) will turn BLUE. This can take between 1

and 2 hours.

HOW TO GUIDE

CONTROL FUNCTIONS

First Time Pairing

Power ON/OFF

Play/Pause

Volume Up/Down

Next/Previous Track

Answer/End Call

Activate Google Assistant or Siri

HOW TO GUIDE

While the earphones are switched off,

press and hold the button until you hear

the words ‘Pairing’.

Go to the Bluetooth settings on your phone

and select ‘MIXX Play SX’ from the list.

Once paired, you will hear ‘Pairing successful,

connected’.

Press and hold the button.

Short press the button.

Short press the / buttons.

Press and hold the / buttons.

Short press the button.

Press and hold the button for 2 seconds.

Listen for the familiar Voice Assist ‘beep

then ask a question or state a command.

LET’S BE SAFE

It’s important that you read this section

completely, especially the ‘Warning, Caution

and Safe Usage’ instructions.

For your protection

Ensure the product is correctly connected using

the manufacturer’s original accessories supplied.

Please keep the product out of reach of children

and animals.

Do not listen to loud music for a long duration

of time. Adjust the volume to a comfortable level

before listening.

Do not use these earphones while operating

machinery, including cars.

Do not use in areas where the use of hearing is

required for safety.

Do not drop, short circuit, disassemble or

continue to use this product if damaged.

We recommend

To refer all servicing to qualified persons.

Servicing may be required when the product

has been damaged in any way, does not operate

normally or has been dropped.

The operating temperature range for this

product is 5º - 40º celsius.

HOW TO GUIDE

WARNING:

This product and the micro USB cable connector

are not water resistant and should not be exposed

to rain, moisture, any splashing or liquid spills.

This may cause excessive heat that may lead to

fire damage or personal injury.

CAUTION: This product contains a Lithium

battery. Incorrect disposal of this battery may

result in an explosion.

LET’S RECYCLE

This product can be recycled.

Products bearing this symbol must NOT be

thrown away with normal household waste.

Take the product to a collection point designated

for recycling of electronic devices.

Find out more about return and collection points

through your local authority.

Feedback is welcome simply email us on

[email protected] or visit mixxaudio.com

for more information.

MXPYSXHTG01

[email protected]

mixxaudio.com

SAFE USAGE INFORMATION

Do not crush, puncture or incinerate the

earphones. Only use certified or device

manufacturer’s charging cable.

MIXX Play SX User Guides

Brand: MIXX

Model: Play SX

Category: Power banks

Type: User Guides

Download PDF

report

MIXX Play SX User Guides

MIXX Play SX User Guides

Related papers