Bracketron PHV-200-BL
The Bracketron PHV-200-BL is a versatile mobile device solution that provides multiple mounting options for your phone in your vehicle. With its interchangeable components, you can securely mount your device in various ways:
- Custom Bezel Mount: Compatible with Bracketron's Custom Bezel Mounts, allowing you to mount your phone in a specific location.
- Air Vent Mounting Kit: Clip the PHV-200-BL onto your vehicle's air vent for easy access while driving.
- T-Notch Mount: Slide the PHV-200-BL onto any T-Notch compatible device for a secure hold.
- 3M Double-Sided Tape: Mount the PHV-200-BL to any clean surface on your vehicle's dash for a customizable placement.
Bracketron PHV-200-BL
The Bracketron PHV-200-BL is a versatile mobile device solution that provides multiple mounting options for your phone in your vehicle. With its interchangeable components, you can securely mount your device in various ways:
- Custom Bezel Mount: Compatible with Bracketron's Custom Bezel Mounts, allowing you to mount your phone in a specific location.
- Air Vent Mounting Kit: Clip the PHV-200-BL onto your vehicle's air vent for easy access while driving.
- T-Notch Mount: Slide the PHV-200-BL onto any T-Notch compatible device for a secure hold.
- 3M Double-Sided Tape: Mount the PHV-200-BL to any clean surface on your vehicle's dash for a customizable placement.
120205-1
NOTE: PLEASE READ AND UNDERSTAND INSTRUCTIONS COM-
PLETELY BEFORE INSTALLING THIS BRACKETRON MOUNTING
ACCESSORY.
This Bracketron PH-Grip-iT Pro-Series mobile device solution is
designed to give you multiple mounting options for the way you use
and carry your mobile device. This kits interchangeable components
gives you all the options you need to safely mount and secure your
phone in your vehicle.
© Bracketron LLC, 2006. All rights reserved.
The information in this document is subject to change without notice. Bracketron LLC. assumes no responsibility for any errors that may appear in this document nor do we assume any liability in
connection with its use. This supersedes and voids all previous literature. Please contact the sales department for additional information.
Bracketron LLC will not be responsible or liable for damage to vehicles in the installation and or removal of this Bracketron LLC mount.
Bracketron LLC will not be liable for personal injuries or damage to property resulting from a motor vehicle accident and or improper installation of this Bracketron LLC mount.
Bracketron LLC9607 Humboldt Ave S, Bloomington, MN 55431, Ph: 952-746-7775 Fax: 1-800-660-1784 Toll Free: 1-866-237-4443
Web Address: www.bracketron.com
Option 2.
Option 2 allows you to use the the
included Air Vent Mounting Kit. Assemble
the Air Vent components (6) and attach it
to the back of the Main Body (1). Carefully
slide the PH-Grip-iT into the vehicles air
vent and until it clips onto the vent louvers.
Adjust the position using the swivel sup-
port.
Option 4 allows you to use the double sided 3M removable
VHB tape (2) to secure the PH-Grip-iT to any clean surface of
your vehicles dash. Make sure to use the alcohol prep pad (3)
on the back of the Main Body (1). Peel off one side of the 3M
tape. Center and apply the tape to the back of the Main Body
(1). Locate a spot on your dash and clean it with the alcohol
prep pad. Peel the remaining side of the tape and apply the
Main Body (1) to the dash. Note: For best results, let tape
cure for 48 hours before use in tempatures above sixty
degrees.
Option 4.
Always check our website for the most updated model year compatibility information.
Visit our website at www.bracketron.com to see our full line of mobile accessories.
Part Number: PHV-200
Option 1.
Option 1 allows you to mount the PH-Grip-iT to any Custom
Bezel Mount’s made by Bracketron. Visit our website at
www.bracketron.com or see your local retailer for a
complete list of Custom Bezel Mounts that Bracketron has
to offer. The PH-Grip-iT will mount to any professional Amps
compatible Custom Bezel Mount. Use the Adapter Plate (9)
along with the included mounting screws and stop nuts (7)
and (8), attach the Adapter Plate to the mount by connecting
the 4 Phillips Pan Head screws to the 4 Nylon Locking Nuts
and tighten with a Phillips screwdriver. Attach the PH-Grip-iT to
the Adapter Plate (9).
1. Main Body
2. 3M Double Sided Tape
3. Alcohol Prep Pad
6. Air Vent Mounting Kit
4. Belt Clip Button
7 & 8 Phillips Pan Head Screws
and Nylon Stop Nuts
5. Self Tapping Screws
9. AMPS Adapter Plate
Option 3.
Option 3 allows the Main
Body (1) to be mounted
to any T-Notch compatible
device. To mount this onto a
T-Notch device, simply slide
the T-Notch into the slot on
the back of the Main Body
(1).
INSTALLATION OPTIONS
The Bracketron PH-Grip-iT contains a number of mount-
ing options that allows the end user to mount an unlim-
ited number of today’s most popular mobile devices. The
wings on the right and left expand by pressing the button
on the lower right hand side of the unit. To adjust it to the
unit that you are mounting, place the unit inside the
PH-Grip-iT. With the wings in the open position, close
them so they grip the unit tightly. To accomodate for
larger/smaller objects, you
can slide the wings up or
down so that the unit is
securely fastened in the
PH-Grip-iT. You can
also adjust the feet so that
they secure the bottom
of your portable device.
PH-Grip-iT Included Hardware
-
1
Bracketron PHV-200-BL
The Bracketron PHV-200-BL is a versatile mobile device solution that provides multiple mounting options for your phone in your vehicle. With its interchangeable components, you can securely mount your device in various ways:
- Custom Bezel Mount: Compatible with Bracketron's Custom Bezel Mounts, allowing you to mount your phone in a specific location.
- Air Vent Mounting Kit: Clip the PHV-200-BL onto your vehicle's air vent for easy access while driving.
- T-Notch Mount: Slide the PHV-200-BL onto any T-Notch compatible device for a secure hold.
- 3M Double-Sided Tape: Mount the PHV-200-BL to any clean surface on your vehicle's dash for a customizable placement.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Bracketron MVM-45-05 User manual
-
-
-
-
-
-
-
-
-