VADDIO 535-2000-223 Installation guide

VADDIO
Brand
VADDIO
Model
535-2000-223
Category
Security camera accessories
Type
Installation guide
©2011 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change
without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Toll Free: 1-800-572-2011,
Main: 763-971-4400, FAX: 763-971-4464. Document Number 341-633 Rev. B
Installation and User Guide
V
VA
AD
DD
DI
IO
O™
™
W
WA
AL
LL
L
M
MO
OU
UN
NT
T
F
FO
OR
R
S
SO
ON
NY
Y®
®
B
BR
RC
C-
-H
H7
70
00
0
O
OR
R
W
WA
AL
LL
LV
VI
IE
EW
W
3
30
00
0
C
CA
AM
ME
ER
RA
A
S
SY
YS
ST
TE
EM
MS
S
Model Number: 535-2000-223
UNPACKING:
Carefully remove the product and all of the parts from the packaging.
Unpack and identify the following parts:
One (1) Wall Mount for Sony BRC-H700 or WallVIEW 300 Systems
(Camera not included)
Two (2) ¼”-20 x ½” mounting screws
Four (4) #8 x 1- ¼” sheet metal screws
Four (4) spiral type drywall anchors
MOUNTING THE CAMERA:
The Wall Mount for the Sony BRC-H700 HD camera and the WallVIEW 300 systems can be mounted to a 3-gang wall box or
mounted directly to a drywall surface with the supplied spiral type wall anchors or other wall anchors of the integrator’s choice. The
slotted mounting holes are 90º opposed from top to bottom to ensure that the camera can be adjusted and mounted level. Note:
When locating the camera, consider viewing angles, lighting conditions, possible line of site obstructions and check for in-wall
obstructions where the camera is to be mounted. Pick a mounting location to optimize the performance of the camera.
INTENDED USE:
This Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the Sony BRC-H700 or
the WallVIEW 300 camera systems. Using this mount for any other device could damage that device and/or create a potentially
unsafe operating condition. The installer is 100% responsible for safely mounting the 535-2000-223 wall mount and attaching the
camera to the mount securely.
HARDWARE WARRANTY:
Please see the Vaddio website at http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The
Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical
Support, Return Material Authorizations (RMA), Voided Warranty, Shipping, Handling and Products Not Under Warranty. The Vaddio
Warranty Statement supercedes all other published warranty statements in content and coverages. Vaddio Technical Support can be
contacted through the Vaddio website or through e-mail support at mailto:[email protected].
Camera and Electronic Products for Integrators
Figure 1:
Installation Diagrams for 535-2000-223
Mounts to a 3-gang
electrical box or
directly to drywall
with wall anchors
Dual ¼”-20 x ½” mounting screws
90º Opposed slotted
mounting holes for
easy camera leveling
Heavy duty 11-gauge
steel construction
Durable black powder
coat finish (paintable
to match any décor)
Welded seams for
strength and stability
  • Page 1 1

VADDIO 535-2000-223 Installation guide

VADDIO
Brand
VADDIO
Model
535-2000-223
Category
Security camera accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers