USER MANUAL
DUAL BATTERY SYSTEM (SMART HUB)
ATEM POWER, born in June, 2017, as a synonym for exciting outdoor experience, is an Australian
company that specializes in solar power kits & equipment. Through years of steady development,
ATEM POWER has successfully secured a place in the field of solar products, possessing premium
solar products, including solar panel, solar cell, charger, inverter and automotive cell, etc, which have
greatly changed people's lifestyle and become an indispensable part of their daily life. At ATEM POWER,
we stay true to our DNA by prioritizing technological innovations designed to improve our products and
striving to provide excellent customer care. Because we are motivated to explore the limits of solar power!
IMPROTANT SAFETY INSTRUCTIONS !
The user must read and understand all of the warning and safety messages supplied with your product
prior to installation or use.
Children or adults under the influence of alcohol or drug, or those who lack of experience or professional
knowledge are not allowed to use this unit.
Do not use or store this smart hub near heat sources such as fire or heaters or expose it to
flammable chemicals, vapors or corrosive gases.
Do not strike, throw the smart hub.
Please do not expose it to moisture or harsh environments.
This product should be firmly fastened to prevent fall down or tip over.
and your unit, but also void the warranty.
This smart hub can only be repaired by professional personnel.
Do not smoke or have an open spark or fire near this unit.
Examine the unit regularly for damage. If it is damaged, it must not be used until it has been repaired.
Please note that this smart hub is not waterproof.
Please do not disassemble this smart hub as such action will not only cause potential damage to you
1
KEY FEATURES
IDENTIFICATION OF PARTS
Designed to connect dual batteries and a solar panel, this ATEM POWER dual battery system, a
sophisticated unit that is 100% plug & play, is compatible with most DC-DC chargers, including ATEM
POWER, CTEK, RENOGY, REDARC and Projecta. It is ideal for 4×4, camper trailers, boats and
caravans and can be installed anywhere in the vehicle. And dual voltage meters provide you a real-time
view of voltage status, LED light displays status and multi-chemistry allows for batteries including Wet,
Calcium, AGM, GEL and LiFePO4 batteries.
2
Battery selector
OUTPUT
Generator Solar AUX battery
Battery type
LED
Vehicle ignition
Solar
Generator
Aux
PACKAGE INCLUDING
1 x DC to DC Smart Hub
2 x Grey Anderson Plugs
1 x Yellow Anderson Plug for Solar
1x Red Anderson Plug for Alternator
1 X Installation Manual
MAIN AUX
WIRING DIAGRAM ( ATEM POWER VABG007A/008A )
3
SOLAR PANEL
+-
Auxiliary Battery
+-
Start / Vehicle Battery
O OUUTT -
SOLAR IN -
SOLAR IN +
DC IN -
DC IN +
OOUUTT +
ACC
To vehicle igniton OBD II
MAIN AUX
4
WIRING DIAGRAM ( ATEM POWER VABG05A/013A )
IN +
GND
OUT +
CTR
SOLAR PANEL
+-
Auxiliary Battery
+-
Start / Vehicle Battery
ACC
To vehicle igniton OBD II
PV -
PV +
MAIN AUX
5
WIRING DIAGRAM ( ATEM POWER VABG004A/006A )
SOLAR
DC INPUT
GND
OUTPUT
SOLAR PANEL
+-
Auxiliary Battery
+-
Start / Vehicle Battery
ACC
To vehicle igniton OBD II
MAIN AUX
WIRING DIAGRAM ( OTHERS )
SOLAR
VEHICLE IGNITION
LED
START BATTERY
AUX BATTERY
SOLAR PANEL
+-
Auxiliary Battery
+-
Start / Vehicle Battery
6
SOLAR PANEL
+-
Auxiliary Battery
+-
Start / Vehicle Battery
EARTH
ACC
SOLAR PANEL
+-
Auxiliary Battery
+-
Start / Vehicle Battery
SOLAR
LED
BATTERY TYPE
START BATTERY
AUX BATTERY
VEHICLE IGNITION
EARTH
SOLAR
START BATTERY
AUX BATTERY
EARTH
CTEK D250S
PROJECTA(IDC25, IDC45)
REDARC(BCDC1225D / BCDC1240D)
To vehicle igniton OBD II
To vehicle igniton OBD II
MAIN AUX
MAIN AUX
MAIN AUX
6
WARRANTY 12
MONTH
WARRANTY PERIOD:
Full 12 months warranty from date of purchase against all manufacturing defects.
This dual battery system (smart hub) by ATEM POWER comes with guarantees that
cannot be excluded under the Australian Consumer Law.
WHAT DOES THE WARRANTY COVER?
Under normal usage conditions, this warranty covers:
1.Any defect in design or manufacture which results in its failure to perform
correctly as described.
2.We will either repair or replace the product at our discretion provide that the
fault is found to have been caused by a design or manufacturing defect and not
misuse or tampering.
3.The limited warranty is the only one that applies to this unit, and it sets forth
all the responsibilities of ATEM POWER.
THE WARRANTY DOES NOT COVER:
1.Cost of removing and reinstalling the product.
2.Travel and /or other expenses due to customer's location
3.Transport charges and damage in transit. It is your responsibility to deliver and
pick up your product, including any costs associated with the postage of repairing or
replacing your product. If you want to send the product back we recommend that you
insure against loss or damage.
4.Any loss directly or indirectly associated with the product that fails to operate.
5.Damage caused by mould, misuse, incorrect operation, adverse weather,
accidents and daily wear and tear.
6.The warranty does not extend to subsequent purchasers or users other than
OEM applications.
7.This unit is not intended for commercial use. This warranty does not apply to
damage to units from misuse or incorrect installation/connection. Misuse includes
wiring or connecting to improper polarity power sources.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ATEM POWER K-VABB004A User manual
-
ATEM POWER AP20DC User manual
-
ATEM POWER VABG008A User manual
-
Redarc MANAGER30 User manual
-
Redarc LBAT12060 User manual
-
Redarc BCDC1240D User manual
-
Redarc SBI12 User manual
-
Redarc BCDC1240 User manual
-
Redarc SMFB1160-K User manual
-
Redarc BCDCWK-001 Operating instructions