•Fitting: Die Cast Aluminum body with Clear Bevelled Glass Lens.
•Lamptype:
O24 / O26: Excluding 1 x E27 Maximum 60W 230V
O74: Excluding 2 x E27 Maximum 60W 230V
•Voltage: 220 – 240V~50Hz.
•Protectionagainstelectricshock: Class 1. Requires earthing.
• IPRating:
O24 / O50: 44
O26 / O74: 33
• Commercial / Domestic use.
• Suitable for outdoor use.
•Maximumambienttemperaturerange:20ºC - 40ºC
•Dimensions:
O24: (H)360mm x (W)160mm x (D)90mm
O26: (H)440mm x (W)260mm x (D)125mm
O50: (H)390mm x (W)230mm x (D)125mm
O74: (H)530mm x (W)300mm x (D)170mm
•Spareglass:
O24: X169
O26: X177
O50: X412
O74: X633
•Beforeinstallationalwaysensurethepowersupplyisturnedoff.
•Thisluminaireisonlysuitableforxedmounting.
•Chooseasolidbasewheretoinstallthexturetightly.
•Connectasindicatedintheconnectiondrawing.
•Fastenthecounterbaseontothewall.
•Connectthetwopowersupplywirestotheterminalblock,accordingtothepictures,observing
the colour code. Brown, Red to live / Blue,Black to neutral / Green-Yellow to earth.
•Fastenthexturetothecounterbasetighteningthetwodome-shapedcapnuts.
•Fixlamprmlyintolampholder.
•Inserttheglass/lensetc.Andlockthesuppliedscrews.
•Reconnectpowersupply.
O24 / O26 / O50 / O74
attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
SPECIFICATIONS
IMPORTANTSAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Coastalareasensurethattheluminaireiscleanedfortnightly.
IMPORTANT:
•Tamperingwiththisluminaire,i.e.usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminaire
must not be used without the protection glass.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalrating.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerialsand/orsurfaces.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsof
this product whilst it is connected to the electricity supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
•Coastalhumiditymayeffectthelongevityoftheluminaire.
•Outdoorluminairesmustbecleanedtopreventrustoccurring.
•Useacoppergreaseonallscrewsorthreads.