Lastec 325ER 98 Owner's manual

Type
Owner's manual
LasTec Articulator
Model 325ER
Parts Manual
Manual Part Number: Man-325ER
LasTec
A Division of Wood-Mizer Products, Inc.
7865 N County Rd 100E
Lizton, Indiana 46149
Phone (317) 892-4444 Fax (317) 892-4188
www.lastec.com
This Page
Has Been
Intentionally
Left Blank
1
LASTEC
Table of Contents Page
Table of Contents 325ER/Pdoc031501 iii
SECTION 1: DRIVE SYSTEM 1
1.1 Pull Bar/Pivot Assembly .................................................................................. 2
1.2 Drive Assembly ............................................................................................... 3
1.3 Gearbox (Serial No. 1550898 - Present)......................................................... 4
1.4 Gearbox (Serial no. 1550898 and Prior) ......................................................... 5
SECTION 2: MOWER DECKS 1
2.1 Deck Pivot & Trap Door Assemblies............................................................... 2
2.2 Spindle Assemblies (Decks ER1/ER3)............................................................ 3
2.3 Spindle Assembly (Deck ER2)........................................................................ 4
2.4 Idler Assembly (Deck ER1)............................................................................. 5
2.5 Idler Assembly (Decks ER3) ........................................................................... 6
2.6 Idler Assembly (Deck ER2)............................................................................. 7
2.7 Grass Chute & Mulching Plate Assemblies..................................................... 8
2.8 Decks and Covers........................................................................................... 9
2.9 Decals ........................................................................................................... 10
2.10 Belts .............................................................................................................. 11
2.11 Lift Chain Assemblies.................................................................................... 12
SECTION 3: WHEELS 1
3.1 Rocker Leg Assembly (ER1)........................................................................... 2
3.2 Rocker Leg Assembly (ER3)........................................................................... 4
3.3 Left & Right Swivel Wheel Assemblies............................................................ 6
3.4 Left & Right Fixed Wheel Assemblies............................................................. 8
3.5 9”x 3.5” Wheel Assemblies, Pneumatic & Foam-Filled................................ 10
3.6 9” x 3.5” Wheel Assemblies, Pneumatic & Foam-Filled................................ 12
Go to www.lastec.com for latest changes in this manual.
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
18458
Housing Weldment, Spindle
2-3
18458 Housing Weldment, Spindle 2-4
18477 Pin Weldment 3-2
18477 Pin Weldment 3-4
18477 Rod Weldment, Lock 3-4
18480 Shaft Weldment, Spindle 2-3
18480 Shaft Weldment, Spindle 2-4
18900 Pin Weldment, Deck Pivot 2-2
19241 Plate, Grass Chute Bottom 2-8
19272 Plate, Universal Trap Door 2-2
19312 Cover, ER1 Belt 2-9
19313 Cover, ER3 Belt 2-9
19348 Rod End, 1/2-20 Female 3-2
19348 Rod End, 1/2-20 Female 3-4
19449
Yoke Weldment, Right Wheel (Serial Numbers 1640298 - 3070698)
3-6
19450
Yoke Weldment, Left Wheel (Serial Numbers 1640298 - 3070698)
3-6
19540
Gearbox, SGCM500SAR21 Modified (See Section 1.3 for gearbox parts)
1-3
19547 Decal, Rocker Height Adjustment 2-10
19557 Decal, Lastec Logo 2-10
19558 Decal, Articulator Logo 2-10
19558 Decal, Change Cut Height 2-10
19559 Decal, Pressure Washer Caution 2-10
19576 Deck Weldment, ER2 2-9
19622 Deck Weldment, ER1 2-9
19623 Deck Weldment, ER3 2-9
19626
Rocker Weldment, Deck EFD1 (Serial Numbers 1640298 - 3070698)
3-2
19626
Rocker Weldment, Deck EFD1 (Serial Numbers 1640298 - 3070698)
3-4
19646 Block, Deck Locking 3-2
19646 Block, Deck Locking 3-4
19650 Spacer, 1/2” 3-2
19650 Spacer, 1/2” 3-4
19662 Bearing Cup 1-4
19663 Bearing 1-4
19687 Pivot Weldment, Deck ER1 3-2
19688 Pivot Weldment, Deck ER3 3-4
19701 Rod Weldment, Lock 3-2
19758 Bracket Weldment, Rocker Limit 3-4
19760 Bracket Weldment, Rocker Limit 3-2
19864 Cover, 20” Chain Sleeve 1-2
19864 Cover, 20” Chain Sleeve 2-12
19874 Arm, Rocker Link 3-2
19874 Arm, Rocker Link 3-4
19919 Yoke Weldment, 9” ER3 Wheel 3-4
19924 Yoke Weldment, 9” ER1 Wheel 3-2
19960 Knob, 1/2-20 Steel Hand 3-2
19960 Knob, 1/2-20 Steel Hand 3-4
19967
Rocker Weldment, Deck ER1 (Serial Numbers 3080798 - Present)
3-2
19969
Rocker Weldment, Deck ER3 (Serial Numbers 3080798 - Present)
3-4
19987 Flap, Rubber ER3 2-2
19991 Flap, Rubber ER4 2-2
28350
Washer, 11/16” ID x 1 3/4” OD x 3/16” Thick Nylon
2-3
28350
Washer, 11/16” ID x 1 3/4” OD x 3/16” Thick Nylon
2-4
29708 Chain, 2/0 x 26” 2-12
29714 Cover, ER2 Drive Belt 2-9
019540-1 Pinion Shaft 1-4
019650-1 Spacer, 1/2” Knurled 3-2
019650-1 Spacer, 1/2” Knurled 3-4
325ER 98 Parts Index
Sorted by Part Number
Page 1 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Number
A149 Wheel Assembly, 9” x 3.5”, Foam-Filled 3-8
A150 Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled 3-8
A150
Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled (See Section 3.5 for wheel components)
3-2
A150
Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled (See Section 3.5 for wheel components)
3-4
A150
Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled (See Section 3.5 for wheel components)
3-6
A150
Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled (See Section 3.5 for wheel components)
3-7
C602 Strip, Rubber Flap Clamping 2-2
F05004-112 Stud, Press-In, 5/16-24 x 3/4” 3-8
F05004-124 Bolt, 3/8-16 x 1/2” Hex Head Grade 5 3-2
F05004-124 Bolt, 3/8-16 x 1/2” Hex Head Grade 5 3-4
F05005-101 Bolt, 1/4-20 x 1” 3-8
F05005-101 Bolt, 1/4-20 x 1” Hex Head Grade 5 2-2
F05005-101 Bolt, 1/4-20 x 1” Hex Head Grade 5 2-8
F05005-123 Bolt, 1/4-20 x 3/4” 3-2
F05005-123 Bolt, 1/4-20 x 3/4” 3-4
F05006-1 Bolt, 5/16-18 x 1” Hex Head 2-12
F05007-118 Bolt, 3/8-16 x 3/4” Hex Head Grade 5 2-2
F05007-118 Bolt, 3/8-16 x 3/4” Hex Head Grade 5 3-2
F05007-118 Bolt, 3/8-16 x 3/4” Hex Head Grade 5 3-4
F05007-123 Bolt, 3/8-16 x 1 1/4” Hex Head Grade 5 3-2
F05007-123 Bolt, 3/8-16 x 1 1/4” Hex Head Grade 5 3-4
F05007-138
Bolt, 7/16-14 x 1 1/2” Hex Head Full Thread Grade 5
1-2
F05007-87 Bolt, 3/8-16 x 1” Hex Head Grade 5 2-9
F05008-10 Bolt, 1/2-13 x 2 1/4” Hex Head Grade 5 2-5
F05008-10 Bolt, 1/2-13 x 2 1/4” Hex Head Grade 5 2-6
F05008-102 Bolt, 1/2-13 x 2” Hex Head Grade 5 3-2
F05008-102 Bolt, 1/2-13 x 2” Hex Head Grade 5 3-4
F05008-37 Bolt, 1/2-13 x 1 1/4” Hex Head Grade 5 1-3
F05008-37 Bolt, 1/2-13 x 1 1/4” Hex Head Grade 5 2-3
F05008-37 Bolt, 1/2-13 x 1 1/4” Hex Head Grade 5 2-4
F05008-74 Bolt, 1/2-13 x 2 1/2” Hex Head Grade 5 2-7
F05008-95 Bolt, 5/8-18 x 1 1/4” Hex Head Grade 5 2-3
F05008-95 Bolt, 5/8-18 x 1 1/4” Hex Head Grade 5 2-4
F05009-44 Bolt, 3/4-10 x 2 1/2” Hex Head Grade 5 1-2
F05009-66 Bolt, 1/2-13 x 2 3/4” Hex Head Grade 8 2-2
F05010-10 Nut, 3/8-16 Hex Nylon Lock 2-9
F05010-103 Nut, 3/4-10 Hex Nylon Lock 1-2
F05010-103 Nut, 3/4-10 Nylon Lock 1-3
F05010-103 Nut, 3/4-10 Nylon Lock 3-2
F05010-103 Nut, 3/4-10 Nylon Lock 3-4
F05010-103 Nut, 3/4-10 Nylon Lock 3-6
F05010-109 Nut, 1-8 Hex Lock 1-3
F05010-121 Nut, 5/16-18 Nylon Lock Jam 2-12
F05010-122 Nut, 3/4-10 Half Nylon Lock 3-2
F05010-122 Nut, 3/4-10 Half Nylon Lock 3-4
F05010-122 Nut, 3/4-10 Half Nylon Lock 3-7
F05010-122 Nut, 3/4-10 Nylon Lock Jam 2-5
F05010-122 Nut, 3/4-10 Nylon Lock Jam 2-6
F05010-127 Nut, 1/2-13 Half Nylon Lock 3-2
F05010-127 Nut, 1/2-13 Half Nylon Lock 3-4
F05010-127 Nut, 1/2-13 Nylon Lock Jam 2-2
F05010-127 Nut, 1/2-13 Nylon Lock Jam 2-7
F05010-135 Nut, 7/16-14 Hex Nylon Lock 1-2
F05010-139 Nut, 7/8-14 Hex 2-3
F05010-139 Nut, 7/8-14 Hex 2-4
F05010-142 Nut, Lug, 5/16-24, Tapered 3-8
F05010-16 Nut, 1/2-20 Hex Jam 3-2
Page 2 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Number
F05010-16 Nut, 1/2-20 Hex Jam 3-4
F05010-24 Nut, 3/8-16 Wing 2-9
F05010-63 Nut, Hex, 1/4-20 3-8
F05010-69 Nut, 1/4-20 Nylon Lock 2-8
F05010-79 Nut, 1/2-20 Nylon Lock Jam 3-2
F05010-79 Nut, 1/2-20 Nylon Lock Jam 3-4
F05010-8 Nut, 1/2-13 Hex Nylon Lock 3-2
F05010-8 Nut, 1/2-13 Hex Nylon Lock 3-4
F05010-8 Nut, 1/2-13 Nylon Lock 2-5
F05010-8 Nut, 1/2-13 Nylon Lock 2-6
F05010-8 Nut, 1/2-13 Nylon Lock 2-7
F05010-90 Nut, 7/8-14 Hex Jam 1-2
F05011-104 Washer, 3/8” x 1/8” Fender 3-2
F05011-104 Washer, 3/8” x 1/8” Fender 3-4
F05011-14 Washer, 1/4” Split Lock 2-2
F05011-14 Washer, Split Lock, 1/4” 3-2
F05011-14 Washer, Split Lock, 1/4” 3-4
F05011-14 Washer, Split Lock, 1/4” 3-8
F05011-17 Washer, 5/16” SAE Flat 2-12
F05011-2 Washer, 1/2” SAE Flat 2-5
F05011-2 Washer, 1/2” SAE Flat 2-6
F05011-2 Washer,1/2” SAE Flat 2-7
F05011-4 Washer, 3/8” Split Lock 2-2
F05011-4 Washer, 3/8” Split Lock 3-2
F05011-4 Washer, 3/8” Split Lock 3-4
F05011-40 Washer, 5/8” Standard Flat 2-3
F05011-40 Washer, 5/8” Standard Flat 2-4
F05011-43 Washer, 7/16” SAE Flat 1-2
F05011-44 Washer, 3/8” Fender 2-9
F05011-46 Washer, 7/8” Split Lock 1-2
F05011-46 Washer, 7/8” Split Lock 2-3
F05011-46 Washer, 7/8” Split Lock 2-4
F05011-60 Washer, 1/4” SAE Flat 2-2
F05011-60 Washer, 1/4” SAE Flat 2-8
F05011-61 Washer, 3/8” SAE Flat 2-9
F05011-62 Washer, 3/4” SAE Flat 1-2
F05011-62 Washer, 3/4” SAE Flat 1-3
F05011-73 Washer, 7/8” SAE Flat 2-3
F05011-73 Washer, 7/8” SAE Flat 2-4
F05011-75 Washer, 1.25 ID x 1.75” OD x 1/8” 3-2
F05011-75 Washer, 1.25 ID x 1.75” OD x 1/8” 3-4
F05011-9 Washer, 1/2” Split Lock 1-3
F05011-9 Washer, 1/2” Split Lock” 2-3
F05011-9 Washer, 1/2” Split Lock” 2-4
F05012-1 Pin, 1/8” x 1” Cotter 2-8
F05012-62 Pin, #210 Hitch 1-2
F05012-62 Pin, #210 Hitch 2-7
F05012-63 Pin, #216 Hitch 2-8
F05012-63 Pin, #216 Hitch 3-2
F05012-63 Pin, #216 Hitch 3-4
F05012-70 Pin, 5/16” x 1 3/4” Clevis 3-2
F05012-70 Pin, 5/16” x 1 3/4” Clevis 3-4
F05013-5 Bolt, 3/4-10 x 3” Hex Head Grade 5 1-3
F05013-70 Bolt, 3/4-10 x 6 1/2” Hex Head Grade 5 3-2
F05013-70 Bolt, 3/4-10 x 6 1/2” Hex Head Grade 5 3-4
F05013-70 Bolt, 3/4-10 x 6 1/2” Hex Head Grade 5 3-6
M230 Plate, Grass Chute 2-8
Page 3 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Number
P103 Bearing, 6305 RS Top Spindle 2-3
P103 Bearing,6305 RS Top Spindle 2-4
P104 Bearing, 6206 TGS Bottom Spindle 2-3
P104 Bearing, 6206 TGS Bottom Spindle 2-4
P105 O-Ring, 2 1/2” x 2 3/4” 2-3
P105 O-Ring, 2 1/2” x 2 3/4” 2-4
P107 Fitting, 1/4-28 Straight Grease 2-7
P107 Fitting, 1/4-28 Straight Grease 2-9
P107 Fitting, 1/4-28 Straight Grease 3-2
P107 Fitting, 1/4-28 Straight Grease 3-4
P108 Fitting, 1/8” NPT Straight Grease 2-3
P108 Fitting, 1/8” NPT Straight Grease 2-4
P109 Bushing, 1” Flanged Bronze 3-6
P109 Bushing, 1” Flanged Bronze 3-7
P109 Bushing, 1” ID x 1 1/4” OD Flanged 1-3
P109 Bushing, 1” ID x 1 1/4” OD Flanged 2-7
P109 Bushing, Bronze, 1” ID 3-2
P109 Bushing, Bronze, 1” ID 3-4
P110 Pin, 3/8” x 1 5/16” Clevis 3-6
P110 Pin, 3/8” x 1 5/16” Clevis 3-7
P111 Ring, 1” Pull 3-6
P111 Ring, 1” Pull 3-7
P122 Pin, Rear Wheel Pivot 1-2
P123 Fitting, 1/4-28 90° Grease 2-5
P123 Fitting, 1/4-28 90° Grease 2-6
P123 Fitting, 1/4-28 90° Grease 2-9
P123 Fitting, 1/4-28 x 90° Grease 3-2
P123 Fitting, 1/4-28 x 90° Grease 3-4
P125 Decal, 540 Max. 2-10
P130 Sheave, 2BK130H 1-3
P179 Decal, Operator Seat Warning 2-10
P183 Pin, 1” x 4 1/2” Clevis 2-7
P244
Pin Assembly, Lift (Includes lock washer and nut below)
1-2
P281 Bushing, 7/8” Type ‘H’ Split Taper 1-3
P290 Wheel Assembly, 9” x 3.5”, Pneumatic 3-8
P291 Hub/Bearing Assembly 3-8
P292 Bearing, Tapered Roller, 3/4” 3-8
P293 Bearing Seal 3-8
P294 Grease Zerk, 1/4-28, 45° 3-8
P295 Wheel/Hub Assembly, 9” x 3.5”, Pneumatic 3-8
P296 Bearing Spacer, 3/4” ID x 1/2” 3-2
P296 Bearing Spacer, 3/4” ID x 1/2” 3-4
P296 Spacer, 1.13 OD x .94 ID x .5” 3-7
P296 Spacer, 3/4” OD x 1/2” ID 3-6
P297 Hub Assembly 3-8
P303 Seal, 1 3/8” 1-4
P325 Gear, 30 Teeth 1-4
P326 Gearbox Casting, Top 1-4
P327 Bolt, 3/8-16 x 2 1/4” SH 1-4
P328 Key, 5/16” SQ x 1.2” 1-4
P329 Retaining Ring 1-4
P330 Pipe Plug, 1/2” NPT 1-4
P331 Breather Plug 1-4
P333 Cross Shaft 1-4
P334 Gearbox Casting, Bottom (w/Breather) 1-4
P402 Bearing Race Insert 3-8
P403 Bushing, 3/4” ID x 5/8” Bronze 2-5
Page 4 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Number
P403 Bushing, 3/4” ID x 5/8” Bronze 2-6
P407 Key, 3/16” SQ x 5/8” 2-3
P407 Key, 3/16” SQ x 5/8” 2-4
P408 Pulley, Idler 2-7
P410 Spring, 1” x 7” Extension 2-7
P410 Spring, 1” x 7” x .148” Extension 2-5
P410 Spring, 1” x 7” x .148” Extension 2-6
P417 Pad, Gearbox Swivel 1-3
P436 Bushing, 3/8” ID x 1” Bronze 2-8
P449 Link, .28” Chain Snap 2-12
P460 Spring, 180° LH Torsion 2-8
P477 Decal, Thrown Objects Danger 2-8
P477 Decal, Thrown Objects Warning 2-10
P478 Decal, Rotating Blades Danger 2-8
P478 Decal, Rotating Blades Danger 2-10
P608 Pulley, Flat Idler 2-5
P608 Pulley, Flat Idler 2-6
P609 Pulley, V-Groove Idler 2-5
P609 Pulley, V-Groove Idler 2-6
P701 Blade, 25”, High-Lift 2-3
P701 Blade, 25”, High-Lift 2-4
P706 Belt, 85890 V 2-11
P707 Belt, 85870 V 2-11
P737 Bearing, 1” ID x 1 1/4” OD x 3/4” Flanged Oiltite 1-3
P744 Belt, 85530 V 2-11
P759 Shaft, 21 1/4” Bondioli PTO 1-3
P786 Bushing, Steel, 3/4” ID x 1” OD x 5/8” 2-2
P836 Decal, Guards Warning 2-10
P837 Decal, Operator Seat Warning 2-10
P843 Washer, 1” ID Wave 3-2
P843 Washer, 1” ID Wave 3-4
P843 Washer, 1” Wave 3-6
P843 Washer, 1” Wave 3-7
T104 Spacer, 1 3/4” OD x 1 1/32” ID x 1/4” 3-2
T104 Spacer, 1 3/4” OD x 1 1/32” ID x 1/4” 3-4
T104 Spacer, 1 3/4” OD x 1 1/32” ID x 1/4” Thick 3-6
T104 Spacer, 1 3/4” OD x 1 1/32” ID x 1/4” Thick 3-7
T107 Spacer, 1 3/4” OD x 1 1/32” ID x 1” Thick 3-6
T107 Spacer, 1 3/4” OD x 1 1/32” ID x 1” Thick 3-7
T125 Bearing Spacer, 3/4” ID x 3/8” 3-2
T125 Bearing Spacer, 3/4” ID x 3/8” 3-4
T126 Spacer, 1.13 OD x .75 ID x .69” 3-7
T156 Pulley, Double Groove 2-3
T160 Pulley, Quad 2-4
W118
Yoke Weldment, Right Wheel (Serial Numbers 3080798 - Present)
3-6
W631 Arm Weldment, Idler 2-6
W632 Arm Weldment, Idler 2-5
W633 Plate Weldment, Grass Chute Mount 2-8
W675 Strap Weldment, 3-Point Pivot 1-2
W676 Chain Weldment, E2 Deck Lift 1-2
W677 Mount Weldment, Gearbox 1-3
W683 Bar Weldment, Pull 1-2
W684 Arm Weldment, Idler 2-7
W685 Yoke Weldment, 9” Left Fixed 3-7
W686 Yoke Weldment, 9” Fixed Right 3-7
W688
Yoke Weldment, Left Wheel (Serial Numbers 3080798 - Present)
3-6
W690 Cover, ER2 Drive Pulley 2-9
Page 5 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Number
W691 Plate Weldment, Mulching 2-8
Page 6 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
W632
2-5
W631 Arm Weldment, Idler 2-6
W684 Arm Weldment, Idler 2-7
19874 Arm, Rocker Link 3-2
19874 Arm, Rocker Link 3-4
W683 Bar Weldment, Pull 1-2
19663 Bearing 1-4
19662 Bearing Cup 1-4
P402 Bearing Race Insert 3-8
P293 Bearing Seal 3-8
P296 Bearing Spacer, 3/4” ID x 1/2” 3-2
P296 Bearing Spacer, 3/4” ID x 1/2” 3-4
T125 Bearing Spacer, 3/4” ID x 3/8” 3-2
T125 Bearing Spacer, 3/4” ID x 3/8” 3-4
P737 Bearing, 1” ID x 1 1/4” OD x 3/4” Flanged Oiltite 1-3
P104 Bearing, 6206 TGS Bottom Spindle 2-3
P104 Bearing, 6206 TGS Bottom Spindle 2-4
P103 Bearing, 6305 RS Top Spindle 2-3
P292 Bearing, Tapered Roller, 3/4” 3-8
P103 Bearing,6305 RS Top Spindle 2-4
P744 Belt, 85530 V 2-11
P707 Belt, 85870 V 2-11
P706 Belt, 85890 V 2-11
P701 Blade, 25”, High-Lift 2-3
P701 Blade, 25”, High-Lift 2-4
19646 Block, Deck Locking 3-2
19646 Block, Deck Locking 3-4
F05009-66 Bolt, 1/2-13 x 2 3/4” Hex Head Grade 8 2-2
F05008-37 Bolt, 1/2-13 x 1 1/4” Hex Head Grade 5 1-3
F05008-37 Bolt, 1/2-13 x 1 1/4” Hex Head Grade 5 2-3
F05008-37 Bolt, 1/2-13 x 1 1/4” Hex Head Grade 5 2-4
F05008-74 Bolt, 1/2-13 x 2 1/2” Hex Head Grade 5 2-7
F05008-10 Bolt, 1/2-13 x 2 1/4” Hex Head Grade 5 2-5
F05008-10 Bolt, 1/2-13 x 2 1/4” Hex Head Grade 5 2-6
F05008-102 Bolt, 1/2-13 x 2” Hex Head Grade 5 3-2
F05008-102 Bolt, 1/2-13 x 2” Hex Head Grade 5 3-4
F05005-101 Bolt, 1/4-20 x 1” 3-8
F05005-101 Bolt, 1/4-20 x 1” Hex Head Grade 5 2-2
F05005-101 Bolt, 1/4-20 x 1” Hex Head Grade 5 2-8
F05005-123 Bolt, 1/4-20 x 3/4” 3-2
F05005-123 Bolt, 1/4-20 x 3/4” 3-4
F05009-44 Bolt, 3/4-10 x 2 1/2” Hex Head Grade 5 1-2
F05013-5 Bolt, 3/4-10 x 3” Hex Head Grade 5 1-3
F05013-70 Bolt, 3/4-10 x 6 1/2” Hex Head Grade 5 3-2
F05013-70 Bolt, 3/4-10 x 6 1/2” Hex Head Grade 5 3-4
F05013-70 Bolt, 3/4-10 x 6 1/2” Hex Head Grade 5 3-6
F05007-123 Bolt, 3/8-16 x 1 1/4” Hex Head Grade 5 3-2
F05007-123 Bolt, 3/8-16 x 1 1/4” Hex Head Grade 5 3-4
F05004-124 Bolt, 3/8-16 x 1/2” Hex Head Grade 5 3-2
F05004-124 Bolt, 3/8-16 x 1/2” Hex Head Grade 5 3-4
F05007-87 Bolt, 3/8-16 x 1” Hex Head Grade 5 2-9
P327 Bolt, 3/8-16 x 2 1/4” SH 1-4
F05007-118 Bolt, 3/8-16 x 3/4” Hex Head Grade 5 2-2
F05007-118 Bolt, 3/8-16 x 3/4” Hex Head Grade 5 3-2
F05007-118 Bolt, 3/8-16 x 3/4” Hex Head Grade 5 3-4
F05006-1 Bolt, 5/16-18 x 1” Hex Head 2-12
F05008-95 Bolt, 5/8-18 x 1 1/4” Hex Head Grade 5 2-3
325ER 98 Parts Index
Sorted by Part Description
Page 1 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Description
F05008-95 Bolt, 5/8-18 x 1 1/4” Hex Head Grade 5 2-4
F05007-138
Bolt, 7/16-14 x 1 1/2” Hex Head Full Thread Grade 5
1-2
19760 Bracket Weldment, Rocker Limit 3-2
19758 Bracket Weldment, Rocker Limit 3-4
P331 Breather Plug 1-4
P109 Bushing, 1” Flanged Bronze 3-6
P109 Bushing, 1” Flanged Bronze 3-7
P109 Bushing, 1” ID x 1 1/4” OD Flanged 1-3
P109 Bushing, 1” ID x 1 1/4” OD Flanged 2-7
P403 Bushing, 3/4” ID x 5/8” Bronze 2-5
P403 Bushing, 3/4” ID x 5/8” Bronze 2-6
P436 Bushing, 3/8” ID x 1” Bronze 2-8
P281 Bushing, 7/8” Type ‘H’ Split Taper 1-3
P109 Bushing, Bronze, 1” ID 3-2
P109 Bushing, Bronze, 1” ID 3-4
P786 Bushing, Steel, 3/4” ID x 1” OD x 5/8” 2-2
W676 Chain Weldment, E2 Deck Lift 1-2
29708 Chain, 2/0 x 26” 2-12
19864 Cover, 20” Chain Sleeve 1-2
19864 Cover, 20” Chain Sleeve 2-12
19312 Cover, ER1 Belt 2-9
29714 Cover, ER2 Drive Belt 2-9
W690 Cover, ER2 Drive Pulley 2-9
19313 Cover, ER3 Belt 2-9
P333 Cross Shaft 1-4
P125 Decal, 540 Max. 2-10
19558 Decal, Articulator Logo 2-10
19558 Decal, Change Cut Height 2-10
P836 Decal, Guards Warning 2-10
19557 Decal, Lastec Logo 2-10
P837 Decal, Operator Seat Warning 2-10
P179 Decal, Operator Seat Warning 2-10
19559 Decal, Pressure Washer Caution 2-10
19547 Decal, Rocker Height Adjustment 2-10
P478 Decal, Rotating Blades Danger 2-8
P478 Decal, Rotating Blades Danger 2-10
P477 Decal, Thrown Objects Danger 2-8
P477 Decal, Thrown Objects Warning 2-10
19622 Deck Weldment, ER1 2-9
19576 Deck Weldment, ER2 2-9
19623 Deck Weldment, ER3 2-9
P123 Fitting, 1/4-28 90° Grease 2-5
P123 Fitting, 1/4-28 90° Grease 2-6
P123 Fitting, 1/4-28 90° Grease 2-9
P107 Fitting, 1/4-28 Straight Grease 2-7
P107 Fitting, 1/4-28 Straight Grease 2-9
P107 Fitting, 1/4-28 Straight Grease 3-2
P107 Fitting, 1/4-28 Straight Grease 3-4
P123 Fitting, 1/4-28 x 90° Grease 3-2
P123 Fitting, 1/4-28 x 90° Grease 3-4
P108 Fitting, 1/8” NPT Straight Grease 2-3
P108 Fitting, 1/8” NPT Straight Grease 2-4
19987 Flap, Rubber ER3 2-2
19991 Flap, Rubber ER4 2-2
P325 Gear, 30 Teeth 1-4
P334 Gearbox Casting, Bottom (w/Breather) 1-4
P326 Gearbox Casting, Top 1-4
Page 2 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Description
19540
Gearbox, SGCM500SAR21 Modified (See Section 1.3 for gearbox parts)
1-3
P294 Grease Zerk, 1/4-28, 45° 3-8
18458 Housing Weldment, Spindle 2-3
18458 Housing Weldment, Spindle 2-4
P297 Hub Assembly 3-8
P291 Hub/Bearing Assembly 3-8
P407 Key, 3/16” SQ x 5/8” 2-3
P407 Key, 3/16” SQ x 5/8” 2-4
P328 Key, 5/16” SQ x 1.2” 1-4
19960 Knob, 1/2-20 Steel Hand 3-2
19960 Knob, 1/2-20 Steel Hand 3-4
P449 Link, .28” Chain Snap 2-12
W677 Mount Weldment, Gearbox 1-3
F05010-139 Nut, 7/8-14 Hex 2-3
F05010-139 Nut, 7/8-14 Hex 2-4
F05010-127 Nut, 1/2-13 Half Nylon Lock 3-2
F05010-127 Nut, 1/2-13 Half Nylon Lock 3-4
F05010-8 Nut, 1/2-13 Hex Nylon Lock 3-2
F05010-8 Nut, 1/2-13 Hex Nylon Lock 3-4
F05010-8 Nut, 1/2-13 Nylon Lock 2-5
F05010-8 Nut, 1/2-13 Nylon Lock 2-6
F05010-8 Nut, 1/2-13 Nylon Lock 2-7
F05010-127 Nut, 1/2-13 Nylon Lock Jam 2-2
F05010-127 Nut, 1/2-13 Nylon Lock Jam 2-7
F05010-16 Nut, 1/2-20 Hex Jam 3-2
F05010-16 Nut, 1/2-20 Hex Jam 3-4
F05010-79 Nut, 1/2-20 Nylon Lock Jam 3-2
F05010-79 Nut, 1/2-20 Nylon Lock Jam 3-4
F05010-69 Nut, 1/4-20 Nylon Lock 2-8
F05010-109 Nut, 1-8 Hex Lock 1-3
F05010-122 Nut, 3/4-10 Half Nylon Lock 3-2
F05010-122 Nut, 3/4-10 Half Nylon Lock 3-4
F05010-122 Nut, 3/4-10 Half Nylon Lock 3-7
F05010-103 Nut, 3/4-10 Hex Nylon Lock 1-2
F05010-103 Nut, 3/4-10 Nylon Lock 1-3
F05010-103 Nut, 3/4-10 Nylon Lock 3-2
F05010-103 Nut, 3/4-10 Nylon Lock 3-4
F05010-103 Nut, 3/4-10 Nylon Lock 3-6
F05010-122 Nut, 3/4-10 Nylon Lock Jam 2-5
F05010-122 Nut, 3/4-10 Nylon Lock Jam 2-6
F05010-10 Nut, 3/8-16 Hex Nylon Lock 2-9
F05010-24 Nut, 3/8-16 Wing 2-9
F05010-121 Nut, 5/16-18 Nylon Lock Jam 2-12
F05010-135 Nut, 7/16-14 Hex Nylon Lock 1-2
F05010-90 Nut, 7/8-14 Hex Jam 1-2
F05010-63 Nut, Hex, 1/4-20 3-8
F05010-142 Nut, Lug, 5/16-24, Tapered 3-8
P105 O-Ring, 2 1/2” x 2 3/4” 2-3
P105 O-Ring, 2 1/2” x 2 3/4” 2-4
P417 Pad, Gearbox Swivel 1-3
P244
Pin Assembly, Lift (Includes lock washer and nut below)
1-2
18477 Pin Weldment 3-2
18477 Pin Weldment 3-4
18900 Pin Weldment, Deck Pivot 2-2
F05012-62 Pin, #210 Hitch 1-2
F05012-62 Pin, #210 Hitch 2-7
F05012-63 Pin, #216 Hitch 2-8
Page 3 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Description
F05012-63 Pin, #216 Hitch 3-2
F05012-63 Pin, #216 Hitch 3-4
F05012-1 Pin, 1/8” x 1” Cotter 2-8
P183 Pin, 1” x 4 1/2” Clevis 2-7
P110 Pin, 3/8” x 1 5/16” Clevis 3-6
P110 Pin, 3/8” x 1 5/16” Clevis 3-7
F05012-70 Pin, 5/16” x 1 3/4” Clevis 3-2
F05012-70 Pin, 5/16” x 1 3/4” Clevis 3-4
P122 Pin, Rear Wheel Pivot 1-2
019540-1 Pinion Shaft 1-4
P330 Pipe Plug, 1/2” NPT 1-4
19687 Pivot Weldment, Deck ER1 3-2
19688 Pivot Weldment, Deck ER3 3-4
W633 Plate Weldment, Grass Chute Mount 2-8
W691 Plate Weldment, Mulching 2-8
M230 Plate, Grass Chute 2-8
19241 Plate, Grass Chute Bottom 2-8
19272 Plate, Universal Trap Door 2-2
T156 Pulley, Double Groove 2-3
P608 Pulley, Flat Idler 2-5
P608 Pulley, Flat Idler 2-6
P408 Pulley, Idler 2-7
T160 Pulley, Quad 2-4
P609 Pulley, V-Groove Idler 2-5
P609 Pulley, V-Groove Idler 2-6
P329 Retaining Ring 1-4
P111 Ring, 1” Pull 3-6
P111 Ring, 1” Pull 3-7
19626
Rocker Weldment, Deck EFD1 (Serial Numbers 1640298 - 3070698)
3-2
19626
Rocker Weldment, Deck EFD1 (Serial Numbers 1640298 - 3070698)
3-4
19967
Rocker Weldment, Deck ER1 (Serial Numbers 3080798 - Present)
3-2
19969
Rocker Weldment, Deck ER3 (Serial Numbers 3080798 - Present)
3-4
19348 Rod End, 1/2-20 Female 3-2
19348 Rod End, 1/2-20 Female 3-4
19701 Rod Weldment, Lock 3-2
18477 Rod Weldment, Lock 3-4
P303 Seal, 1 3/8” 1-4
18480 Shaft Weldment, Spindle 2-3
18480 Shaft Weldment, Spindle 2-4
P759 Shaft, 21 1/4” Bondioli PTO 1-3
P130 Sheave, 2BK130H 1-3
T104 Spacer, 1 3/4” OD x 1 1/32” ID x 1/4” 3-2
T104 Spacer, 1 3/4” OD x 1 1/32” ID x 1/4” 3-4
T104 Spacer, 1 3/4” OD x 1 1/32” ID x 1/4” Thick 3-6
T104 Spacer, 1 3/4” OD x 1 1/32” ID x 1/4” Thick 3-7
T107 Spacer, 1 3/4” OD x 1 1/32” ID x 1” Thick 3-6
T107 Spacer, 1 3/4” OD x 1 1/32” ID x 1” Thick 3-7
T126 Spacer, 1.13 OD x .75 ID x .69” 3-7
P296 Spacer, 1.13 OD x .94 ID x .5” 3-7
19650 Spacer, 1/2” 3-2
19650 Spacer, 1/2” 3-4
019650-1 Spacer, 1/2” Knurled 3-2
019650-1 Spacer, 1/2” Knurled 3-4
P296 Spacer, 3/4” OD x 1/2” ID 3-6
P410 Spring, 1” x 7” Extension 2-7
P410 Spring, 1” x 7” x .148” Extension 2-5
P410 Spring, 1” x 7” x .148” Extension 2-6
Page 4 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Description
P460 Spring, 180° LH Torsion 2-8
W675 Strap Weldment, 3-Point Pivot 1-2
C602 Strip, Rubber Flap Clamping 2-2
F05004-112 Stud, Press-In, 5/16-24 x 3/4” 3-8
F05011-75 Washer, 1.25 ID x 1.75” OD x 1/8” 3-2
F05011-75 Washer, 1.25 ID x 1.75” OD x 1/8” 3-4
F05011-2 Washer, 1/2” SAE Flat 2-5
F05011-2 Washer, 1/2” SAE Flat 2-6
F05011-9 Washer, 1/2” Split Lock 1-3
F05011-9 Washer, 1/2” Split Lock” 2-3
F05011-9 Washer, 1/2” Split Lock” 2-4
F05011-60 Washer, 1/4” SAE Flat 2-2
F05011-60 Washer, 1/4” SAE Flat 2-8
F05011-14 Washer, 1/4” Split Lock 2-2
P843 Washer, 1” ID Wave 3-2
P843 Washer, 1” ID Wave 3-4
P843 Washer, 1” Wave 3-6
P843 Washer, 1” Wave 3-7
28350
Washer, 11/16” ID x 1 3/4” OD x 3/16” Thick Nylon
2-3
28350
Washer, 11/16” ID x 1 3/4” OD x 3/16” Thick Nylon
2-4
F05011-62 Washer, 3/4” SAE Flat 1-2
F05011-62 Washer, 3/4” SAE Flat 1-3
F05011-44 Washer, 3/8” Fender 2-9
F05011-61 Washer, 3/8” SAE Flat 2-9
F05011-4 Washer, 3/8” Split Lock 2-2
F05011-4 Washer, 3/8” Split Lock 3-2
F05011-4 Washer, 3/8” Split Lock 3-4
F05011-104 Washer, 3/8” x 1/8” Fender 3-2
F05011-104 Washer, 3/8” x 1/8” Fender 3-4
F05011-17 Washer, 5/16” SAE Flat 2-12
F05011-40 Washer, 5/8” Standard Flat 2-3
F05011-40 Washer, 5/8” Standard Flat 2-4
F05011-43 Washer, 7/16” SAE Flat 1-2
F05011-73 Washer, 7/8” SAE Flat 2-3
F05011-73 Washer, 7/8” SAE Flat 2-4
F05011-46 Washer, 7/8” Split Lock 1-2
F05011-46 Washer, 7/8” Split Lock 2-3
F05011-46 Washer, 7/8” Split Lock 2-4
F05011-14 Washer, Split Lock, 1/4” 3-2
F05011-14 Washer, Split Lock, 1/4” 3-4
F05011-14 Washer, Split Lock, 1/4” 3-8
F05011-2 Washer,1/2” SAE Flat 2-7
A149 Wheel Assembly, 9” x 3.5”, Foam-Filled 3-8
P290 Wheel Assembly, 9” x 3.5”, Pneumatic 3-8
A150 Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled 3-8
A150
Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled (See Section 3.5 for wheel components)
3-2
A150
Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled (See Section 3.5 for wheel components)
3-4
A150
Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled (See Section 3.5 for wheel components)
3-6
A150
Wheel/Hub Assembly, 9” x 3.5”, Foam-Filled (See Section 3.5 for wheel components)
3-7
P295 Wheel/Hub Assembly, 9” x 3.5”, Pneumatic 3-8
19924 Yoke Weldment, 9” ER1 Wheel 3-2
19919 Yoke Weldment, 9” ER3 Wheel 3-4
W686 Yoke Weldment, 9” Fixed Right 3-7
W685 Yoke Weldment, 9” Left Fixed 3-7
19450
Yoke Weldment, Left Wheel (Serial Numbers 1640298 - 3070698)
3-6
W688
Yoke Weldment, Left Wheel (Serial Numbers 3080798 - Present)
3-6
19449
Yoke Weldment, Right Wheel (Serial Numbers 1640298 - 3070698)
3-6
Page 5 of 6
Go to www.lastec.com for latest changes in this manual.
Part No.
Part Description
Page Numbers
325ER 98 Parts Index
Sorted by Part Description
W118
Yoke Weldment, Right Wheel (Serial Numbers 3080798 - Present)
3-6
Page 6 of 6
Go to www.lastec.com for latest changes in this manual.
Drive System
Drive System 325ER98/masterdoc031501 1-1
1
SECTION 1: DRIVE SYSTEM
Go to www.lastec.com for latest changes in this manual.
Drive System
Pull Bar/Pivot Assembly
1
1-2 325ER98/masterdoc031501 Drive System
FIG. 1-1
1.1 Pull Bar/Pivot Assembly
Ref. No. Part No. Part Description
1W683 Bar Weldment, Pull
2P244 Pin Assembly, Lift (Includes lock washer and nut below)
3F05011-46 Washer, 7/8” Split Lock
4F05010-90 Nut, 7/8-14 Hex Jam
5W675 Strap Weldment, 3-Point Pivot
6F05011-62 Washer, 3/4” SAE Flat
7F05009-44 Bolt, 3/4-10 x 2 1/2” Hex Head Grade 5
8F05010-103 Nut, 3/4-10 Hex Nylon Lock
9P122 Pin, Rear Wheel Pivot
10 F05012-62 Pin, #210 Hitch
11 W676 Chain Weldment, E2 Deck Lift
12 019864 Cover, 20” Chain Sleeve
13 F05007-138 Bolt, 7/16-14 x 1 1/2” Hex Head Full Thread Grade 5
14 F05011-43 Washer, 7/16” SAE Flat
15 F05010-135 Nut, 7/16-14 Hex Nylon Lock
1
2
2
3
4
34
5
6
67
7
8
910
11
12
12
13
14 15
15
14
425ER100-15
Go to www.lastec.com for latest changes in this manual.
Drive System
Drive Assembly
Drive System 325ER98/masterdoc031501 1-3
1
FIG. 1-2
1.2 Drive Assembly
Ref. No. Part No. Part Description
1W677 Mount Weldment, Gearbox
2019540 Gearbox, SGCM500SAR21 Modified (See Section 1.3 for gearbox parts)
3P130 Sheave, 2BK130H
4P281 Bushing, 7/8” Type ‘H’ Split Taper
5F05011-9 Washer, 1/2” Split Lock
6F05008-37 Bolt, 1/2-13 x 1 1/4” Hex Head Grade 5
7F05011-62 Washer, 3/4” SAE Flat
8F05013-5 Bolt, 3/4-10 x 3” Hex Head Grade 5
9F05010-103 Nut, 3/4-10 Nylon Lock
10 P417 Pad, Gearbox Swivel
11 P737 Bearing, 1” ID x 1 1/4” OD x 3/4” Flanged Oiltite
12 P109 Bushing, 1” ID x 1 1/4” OD Flanged
13 F05010-109 Nut, 1-8 Hex Lock
P759 Shaft, 21 1/4” Bondioli PTO
4
5
6
6
6
7
8
7
9
10
11 12
13
3
1
2
425ER100-14
Go to www.lastec.com for latest changes in this manual.
Drive System
Gearbox (Serial No. 1550898 - Present)
1
1-4 325ER98/masterdoc031501 Drive System
1.3 Gearbox (Serial No. 1550898 - Present)
Ref. No. Part No. Part Description
1P326 Top, Gear Box
2P334 Bottom, Gear Box
3019965 Shaft, Pinion Gear
4019966 Shaft, Crown Gear
5019663 Bearing Cup
6019662 Bearing Cone, 14137A
7P303 Seal, In/Output
8P327 Bolt, 3/8-16 x 2.25
9P330 Plug, NPT Hex 3/4
10 P329 Ring, Superior Gear Box Retaining
11 P331 Plug, Pre Relief
Go to www.lastec.com for latest changes in this manual.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47

Lastec 325ER 98 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI