Pure Comfort 8501AB User manual

Brand
Pure Comfort
Model
8501AB
Type
User manual

Pure Comfort 8501AB

The Pure Comfort 8501AB is a queen-sized raised airbed with a weight limit of 500 lbs. It comes with an electric pump that can inflate the bed in about 4 minutes. The bed has two inflation valves, one for the main chamber and one for the upper valve. To inflate the bed, simply connect the electric pump to a power socket and fit the largest adapter to the pump. Locate the inflation valves on the bed and open both caps on each valve. Inflate the main chamber to about 80% with the pump, then close the inner, one-way valve cap. Switch the pump adapter to the middle adapter and use the inner, one-way valve to complete inflation until desired firmness is reached. Follow the same steps to inflate the upper valve. To deflate the bed, simply open both valve caps and let the air flow out.

Pure Comfort 8501AB

The Pure Comfort 8501AB is a queen-sized raised airbed with a weight limit of 500 lbs. It comes with an electric pump that can inflate the bed in about 4 minutes. The bed has two inflation valves, one for the main chamber and one for the upper valve. To inflate the bed, simply connect the electric pump to a power socket and fit the largest adapter to the pump. Locate the inflation valves on the bed and open both caps on each valve. Inflate the main chamber to about 80% with the pump, then close the inner, one-way valve cap. Switch the pump adapter to the middle adapter and use the inner, one-way valve to complete inflation until desired firmness is reached. Follow the same steps to inflate the upper valve. To deflate the bed, simply open both valve caps and let the air flow out.

QUEEN SIZED RAISED AIRBED
MODEL# 8501AB
PRODUCT MANUAL VERSION 10.19.01
PRODUCT IMAGE
INFLATE INSTRUCTIONS
1. Check your surroundings for any sharp
objects on the floor that may cause
damage to the bed (nails, screws, paper-
clips, etc.)
2. Unfold the bed and lay it flat on the floor.
3. Make sure the pump is in the "OFF"
position and connect the electric pump to a
power socket. Fit the Largest adapter to
the pump.
4. Locate the inflation valves on the bed.
5. Open both caps on each valve. You need to
open the outer cap AND the inner cap.
6. Inflate the Main Chamber (lower valve) on
the bed to about 80% with the pump.
(about 4 min.). Immediately close the
inner, one-way valve cap. DO NOT
OVERINFLATE.
7. Switch the pump adapter to the Middle
adapter and use the inner, one-way valve
to complete inflation until desired firmness
is reached, as shown on the right. DO NOT
OVERINFLATE.
8. Follow the inflation instructions in Steps
9. 7 for the Upper Valve.
10. Close the outer cap on the valves, and
push each valve flush into the bed.
DEFLATE INSTRUCTIONS
1. Open BOTH valve caps as in Step 5, and let
the air flow out. If desired, you can put an
adapter on the "DEFLATE" input on the
pump to assist in removing the air.
2. When the bed is nearly fully deflated, fold
the left side and the right side of the bed
to the center, leaving the middle with the
valve flat.
3. Begin to roll up the bed from the bottom
to assist is releasing any remaining air.
WARNINGS
• DO NOT OVER OR UNDER INFLATE.
• KEEP AWAY FROM SHARP EDGES, NAILS, OR ANY
SHARP OR POINTED OBJECTS.
• DO NOT STAND, WALK, OR JUMP ON BED.
• DO NOT ALLOW CHILDREN TO PLAY OR JUMP ON
THE AIR MATTRESS.
• KEEP AWAY FROM OPEN FLAME, HEATERS, OR
ANYTHING THAY MAY MELT THE PVC ON THE AIR
MATTRESS.
• DO NOT SMOKE ON THE BED.
• THIS IS NOT A LIFE SAVING DEVICE. DO NOT USE
AS A FLOTATION DEVICE OR AS A WATER TOY.
• DO NOT LET YOUNG CHILDREN SLEEP ON THIS
MATTRESS UNTIL MATURE ENOUGH TO SLEEP IN
AN ADULT BED. YOUNG CHILDREN CAN
SUFFOCATE, ESPECIALLY IN THE CASE OF
UNEXPECTED DEFLATION. NEVER LEAVE A CHILD
UNATTENDED OR SLEEP ON SAME MATTRESS AS
A
YOUNG CHILD.
•
MAXIMUM
WEIGHT: 500 LBS/227KGS TOTAL.
WEIGHT LIMIT
&WARNING
500 Lbs



227 Kgs
LIMITED WARRANTY
GLOBAL QUALITY BRANDS® WARRANTS THIS PRODUCT TO
BE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS
UNDER NORMAL USE AND CONDITIONS FOR A PERIOD OF 90
DAYS FROM THE DATE OF ORIGINAL PURCHASE. THIS LIMITED
WARRANTY IS NOT TRANSFERABLE AND IS AVAILABLE ONLY
FOR THE ORIGINAL PURCHASER OF THE PRODUCT.THE
COMPANY'S OBLIGATION UNDER THIS WARRANTY IS
LIMITEDTO REPLACING OR REPAIRING THE PRODUCT, AT THE
DISCRETION OF THE COMPANY.
ALL WARRANTY COVERAGE EXTENDS ONLY TO THE ORIGINAL
RETAIL PURCHASER FROM THE DATE OF PURCHASE,
OBLIGATION UNDER THIS WARRANTY IS LIMITED TO
REPLACING OR REPAIRING, AT GLOBAL QUALITY BRANDS®
OPTION. ALL PRODUCTS FOR WHICH A WARRANTY CLAIM IS
MADE MUST BE RECEIVED BY GLOBAL QUALITY BRANDS®
AND ACCOMPANIED BY SUFFICIENT PROOF OF PURCHASE
(PHOTOCOPY OF THE ORIGINAL STORE RECEIPT, INDICATING
THE DATE OF PURCHASE). ALL FREIGHT AND HANDLING FEES
ARE THE RESPONSIBILITY OFTHE CONSUMER TO PAY, BOTH
TO AND FROM GLOBAL QUALITY BRANDS®. ALL WARRANTY
CLAIMS MUST BE PREAUTHORIZED BY GLOBAL QUALITY
BRANDS® PRE-AUTHORIZATION CAN BE OBTAINED BY
CALLING 866-498-5269. THIS WARRANTY DDES NOT COVER
ORDINARY WEAR AND TEAR, WEATHERING, FAILURE TO
FOLLOW DIRECTIONS, IMPROPER INSTALLATION, IMPROPER
MAINTENANCE, OR ACTS OF NATURE, (SUCH AS DAMAGE
CAUSED BY WIND, LIGHTNING, SNOW, WATER, OR ICE)
WEATHER DAMAGE, DAMAGE CAUSED BY UNAUTHORIZED
REPAIR WORK OR DAMAGE CAUSED BY IMPROPER USE OF
THE PRODUCTS ARE NOT COVERED BY THE PRODUCT
WARRANTY. NO OTHER WARRANTY BEYOND THAT
SPECIFICALLY SET FORTH ABOVE IS AUTHORIZED BY GLOBAL
QUALITY BRANDS®.
GLOBAL QUALITY BRANDS® IS NOT RESPONSIBLE OR LIABLE FOR
INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR
IN CONNECTION WITH THE USE OR PERFORMANCE OFTHE PRODUCT
OR OTHER DAMAGES WITH RESPECTTO ANY ECONOMIC LOSS, LOSS OF
PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT OR
USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL
DAMAGES. SOME STATES
DO NOT ALLOWTHE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
ACCORDINGLY,THE ABOVE LIMITATION MAY NOT APPLYTOYOU.
THE WARRANTY EXTENDED HEREUNDER IS IN LIEU OF ALL OTHER
WARRANTIES AND GLOBAL QUALITY BRANDS®, SPECIFICALLY
DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN ITS SCOPE AND
DURATIONTOTHE TERMS SET FORTH HEREIN. SOME STATES DO NOT
ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS.
ACCORDINGLY, THE ABOVE LIMITATION MAY NO APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM STATETO STATE.
WHILE EVERY ATTEMPT IS MADETO ENSURE THE HIGHEST DEGREE OF
PROTECTION IN ALL EQUIPMENT, WE CANNOT GUARANTEE FREEDOM
OF INJURY. THE USER ASSUMES ALL RISK OF INJURY DUE TO USE. ALL
MERCHANDISE IS SOLD ON THIS CONDITION, WHICH NO
REPRESENTATIVE OF GLOBAL QUALITY BRANDS® CAN WAIVE OR
CHANGE.
GQBrands.com





q

If you have an issue with your item, do not
return. Please report items that are damaged or
missing parts to the manufacturer GQ Brands
within three days of delivery. Contact customer
service at [email protected] or
toll-free at 1-866-498-5269
DEFLATE INSTRUCTIONS
CUSTOMER SERVICE
  • Page 1 1

Pure Comfort 8501AB User manual

Brand
Pure Comfort
Model
8501AB
Type
User manual

Pure Comfort 8501AB

The Pure Comfort 8501AB is a queen-sized raised airbed with a weight limit of 500 lbs. It comes with an electric pump that can inflate the bed in about 4 minutes. The bed has two inflation valves, one for the main chamber and one for the upper valve. To inflate the bed, simply connect the electric pump to a power socket and fit the largest adapter to the pump. Locate the inflation valves on the bed and open both caps on each valve. Inflate the main chamber to about 80% with the pump, then close the inner, one-way valve cap. Switch the pump adapter to the middle adapter and use the inner, one-way valve to complete inflation until desired firmness is reached. Follow the same steps to inflate the upper valve. To deflate the bed, simply open both valve caps and let the air flow out.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents